Abstract:Lithium–sulfur batteries are one of the most promising next generation electrochemical devices with low cost and high energy density. Up to now, various metal oxides with strong interaction with lithium polysulfides (LiPs) have been designed as sulfur hosts to inhibit the notorious shuttle effect. Nitrogen doping on metal oxides can not only improve their shortcomings of poor electrical conductivity, but also introduce additional oxygen vacancies to further enhance their interaction with LiPs. In this work, the nitrogen-doped titanium monoxide (N–TiO) nanospheres have been first synthesized through a one-step method based on the synergistic effect of carbothermal reduction and nitridation reaction. The X-ray diffraction results suggested the gradually changed diffraction peak position, corresponding to the nitridation process. Through the calculation of Gibbs free energies in the temperature range of 800–1500 K, it was confirmed that TiO2 can directly transform to TiO and then to TiN. Moreover, the structural characterization and X-ray photoelectron spectroscopy results suggested the synthesized N–TiO nanospheres contain mixed valences of Ti4+, Ti3+, and Ti2+, together with a significantly increased O vacancy concentration. By using N–TiO/S as the cathode, a high initial capacitance of 1438 mA h g–1 at 0.2 C can be achieved, which was higher than those of the undoped TiO/S and TiN/S electrodes. In addition, such a cathode also delivered an initial discharge capacity of 1105 mA h g–1 at 2 C, and retained 474 mA h g–1 after 800 cycles, corresponding to the capacity decay rate of 0.071% per cycle. The strong interaction between O vacancies in N–TiO and LiPs, which has been confirmed through visible adsorption experiment and cyclic voltammetry curves of the Li2S6 symmetric cells, is the main reason for its excellent electrochemical performance. This work can provide new ideas for the preparation and application of N-doped metal oxide materials in the field of lithium–sulfur batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00560?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00560</a>.Thermodynamic calculation methods; SEM images of the as synthesized TiO2 nanospheres; STEM image and SEI of the PDA-coated TiO2 nanospheres with corresponding EDX mapping scan results; SEM images of N-TiO without PDA coating; morphology and structural characterization results of TiN and Ar-TiO nanospheres; high-resolution SEI images of the three types of nanospheres; TGA curves and structural characterization results of N-TiO/S, Ar-TiO/S, and TiN/S cathodes; CV curves of the N-TiO/S electrode and Li2S6 symmetric cells with the three types of nanospheres as electrodes; galvanostatic charge–discharge curves of the three electrodes; calculated integrated area and relative content of fitted peaks in XPS spectra; and constants involved in the calculation of Gibbs free energies(<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00560/suppl_file/ae1c00560_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Transition metal nitrides embedded in N -doped porous graphitic Carbon: Applications as electrocatalytic sulfur host materials

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Theoretical Investigation of the Electrochemical Performance of Transition Metal Nitrides for Lithium-Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Kinetic Enhancement of Sulfur Cathodes by N-Doped Porous Graphitic Carbon with Bound VN Nanocrystals

Oxygen-doped TiN entrapped in N-doped porous graphitic carbon promotes sulfur cathode kinetics

Molybdenum carbide nanoparticles encapsulated in N-doped carbon nanotubes as a sulfur host for advanced Li-S battery

Rational Design of Porous Nitrogen-Doped Ti3C2 MXene As a Multifunctional Electrocatalyst for Li–S Chemistry

Nanoconfined Topochemical Conversion from MXene to Ultrathin Non-Layered TiN Nanomesh toward Superior Electrocatalysts for Lithium-Sulfur Batteries

High-Entropy Metal Nitride Embedded in Concave Porous Carbon Enabling Polysulfide Conversion in Lithium-Sulfur Batteries

MoP nanoparticles encapsulated in N-doped carbon nanotubes as sulfur host for advanced lithium-sulfur batteries

Nitrogen-Doped Carbon and Metal-Nitrogen-Carbon Materials as Cathode Hosts for Li-S Batteries: Experimental Study and Mechanism Analysis

Transition Metal Nitrides for Electrocatalytic Application: Progress and Rational Design

Reviving Catalytic Activity of Nitrides by the Doping of the Inert Surface Layer to Promote Polysulfide Conversion in Lithium-Sulfur Batteries

Conductive Mesoporous Niobium Nitride Microspheres/Nitrogen-Doped Graphene Hybrid with Efficient Polysulfide Anchoring and Catalytic Conversion for High-Performance Lithium-Sulfur Batteries.

Molybdenum Nitride/N-Doped Carbon Nanospheres for Lithium-O-2 Battery Cathode Electrocatalyst

Atomically Dispersed Transition Metal-Nitrogen-Carbon Electrocatalysts: Design, Synthesis, Characterization, Reactivity and Durability

Formation Mechanism of Nitrogen-Doped Titanium Monoxide Nanospheres and Their Application as Sulfur Hosts in Lithium Sulfur Batteries

Recent Progress in the Synthesis of Transition Metal Nitride Catalysts and Their Applications in Electrocatalysis

Entropy Engineering‐Modulated D‐Band Center of Transition Metal Nitrides for Catalyzing Polysulfide Conversion in Lithium‐Sulfur Batteries

Integrating CoP/Co heterojunction into nitrogen-doped carbon polyhedrons as electrocatalysts to promote polysulfides conversion in lithium-sulfur batteries