Abstract:Additive manufacturing, particularly Wire Arc Additive Manufacturing (WAAM), provides numerous advantages for the production of near net shape components, since it combines a high productivity with a reduced material waste. It is of major interest when working with expensive materials such as titanium alloy Ti-6Al-4V, commonly used in aerospace. Due to high temperature gradients WAAM is very susceptible to high residual stresses and hence, distortion problems. In order to avoid extensive experimental parameter studies in the design phase to mitigate these issues, a process design based on numerical simulation is favourable. However, accurate estimations up to now necessitate the implementation of transient multi-physics models, which may not be effective when applied to large structures because of their associated large computational time. Consequently, there is a clear need for faster numerical models, especially when path planning optimization is targeted. A promising very fast approach to solve this problem is the so-called inherent strain formulation. However, the original inherent strain formulation is hard to implement in certain commercial finite element (FE) software packages, since strain data is harder to access than stress data. In addition, the original approach requires the modification of the FE solver itself, and hence needs to be adapted for each FE analysis software package individually, which is not only inefficient but might lead also to different results. To overcome these issues a more universally applicable and non-intrusive incremental Inherent Stress formulation that can be incorporated to any commercial finite element solver has been developed within this work. Within the modelling approach the additive manufacturing of a representative component is simulated bead by bead, with the addition of each new bead corresponding to a linear elastic problem that can be rapidly solved. Furthermore, the model incorporates the temperature dependency of the Young's modulus during heating and cooling cycles to better account for thermo-mechanical coupling. Evolution of inherent stress during the deposition of successive layers is also introduced to increase the fidelity of the model. The validity of the model was assessed using two stiffened representative geometries with different complexity. In both cases, a major reduction in computational up to 98 % is observed, with a corresponding displacement error of 20 % in the worst-case scenario, thus constituting an interesting tool to evaluate distortion trends.

Simulation of residual stress and distortion evolution in dual-robot collaborative wire-arc additive manufactured Al-Cu alloys

Finite Element Method Simulation for Residual Stress in Quenched Aluminum Alloy Thick-Plate and Its Effect on Machining Distortion

Investigation of Esidual Stress in Multi Arc-based Cooperative Metal Additive Manufacturing

Residual Stress and Deformation in Wire-Feed Electron Beam Additive Manufactured Aluminum Components

Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing

Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components

Inhomogeneity and anisotropy of Al-Zn-Mg-Cu alloy manufactured by wire arc additive manufacturing: microstructure, mechanical properties, stress corrosion cracking susceptibility

Simulation of temperature field and deformation in laser-arc hybrid additive manufacturing

Numerical Simulation of Residual Stress and Deformation in Wire Arc Additive Manufacturing

Robotic Wire-Based Friction Stir Additive Manufacturing

Numerical simulation of thermal and stress fields for multilayer and multi-pass weaving WAAM of magnesium alloy

Modelling and Experimental Observation of the Deposition Geometry and Microstructure Evolution of Aluminum Alloy Fabricated by Wire-Arc Additive Manufacturing

Distortion Analysis Method for Wire Arc Additive Manufacturing Component Using Thermomechanical Computation with Enhanced Separation and Deposition Algorithm

Multiscale modelling of microstructure, micro-segregation, and local mechanical properties of Al-Cu alloys in wire and arc additive manufacturing

A Dual-Side Deposition Technique to Mitigate Deformation in Wire Arc Additive Manufacturing

Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire

Investigation of residual stresses and modeling of tensile deformation in wire-arc additive manufactured 6061 aluminum alloy: Diffraction and elastoplastic self-consistent model

Simulation of Wire Arc Additive Manufacturing in the Reinforcement of a Half-Cylinder Shell Geometry

Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties

Incremental inherent stress model for the fast prediction of part distortion made via wire arc additive manufacturing

Deformation prediction and experimental investigation on alternating additive-subtractive hybrid manufacturing of 316L stainless steel thin-walled parts