Abstract:The development of phase change material (PCM) for battery thermal management poses key limitations on its reliability caused by leakage and shape deformation under high temperature. In this work, a kind of phase changeable and hydrophobic polymer skeleton is grown in situ in a paraffin (PA)/expanded graphite matrix to obtain the leakage-proof composite PCM (CPCM) at the kilogram-level. Benefiting from the additional latent heat provided by the phase changeable alkyl side chains of the polymer skeleton, the obtained CPCM shows a high latent heat of 120.3 J g–1 coupled with a thermal conductivity of 2.92 W m–1 K–1. Most importantly, the three-dimensional cross-linking main chain and the hydrophobic alkyl side chains endow the obtained CPCM with extraordinary shape stability under high temperatures up to 250 °C and high PA adsorbing capability, respectively. As a consequence, the CPCM presents excellent antileakage performance for the battery module (21 V/16 Ah) under harsh working conditions, i.e., 50 charge–discharge cycles at 3C–4C, thus giving rise to a durable cooling performance. The maximum temperature (Tmax) and temperature difference (ΔTmax) of the battery module can be controlled constant at 50.9 and 5.0 °C during the cycles, respectively. By stark contrast, owing to the obvious leakage phenomenon, the battery module with traditional CPCM adopting a classical low-density polyethylene skeleton shows increasing Tmax and ΔTmax during the cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00235?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00235</a>.Details of charge–discharge parameters; comparison of the latent heat; cyclic stability of the ΔHm, Tmax, and ΔTmax of the battery module upon cycling; preparation procedures of CPCM; schematic diagram of the battery module; DSC curves of OA, PA, LDPE, and CPCM; and current and voltage trace (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00235/suppl_file/ae1c00235_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

MIL-101(Cr)-NH2/reduced graphene oxide composite carrier enhanced thermal conductivity and stability of shape-stabilized phase change materials for thermal energy management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Thermally-induced flexible composite phase change material with enhanced thermal conductivity

Synergistic enhancement of phase change materials through three-dimensional porous layered covalent triazine framework/expanded graphite composites for solar energy storage and beyond

Enhanced interfacial thermal conductivity of functionalized boron nitride/polyvinyl alcohol/octadecane composite phase-change materials towards effective thermal management

Research on novel battery thermal management system coupling with shape memory PCM and molecular dynamics analysis

A novel enhancement of shape/thermal stability and energy-storage capacity of phase change materials through the formation of composites with 3D porous (3,6)-connected metal–organic framework

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

Hierarchical 3D Reduced Graphene Porous-Carbon-Based PCMs for Superior Thermal Energy Storage Performance

Shape-stabilized phase change material based on MOF-derived oriented carbon nanotubes for thermal management of lithium-ion battery

A structured phase change material integrated by MXene/AgNWs modified dual-network and polyethylene glycol for energy storage and thermal management

A novel stable and flexible composite phase change materials for battery thermal management

Thermally conductive and form-stable phase change composite for building thermal management

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

High thermal conductivity composite phase change material with nano-Ag particles modified diatomite and expanded graphite for improving battery thermal management efficiency

A Novel Room-Temperature Flexible Phase Change Material for Solar Energy Photothermal Conversion and Battery Thermal Management

Thermal Property Enhancement of a Novel Shape-Stabilized Sodium Acetate Trihydrate-Acetamide/Expanded Graphite-Based Composite Phase Change Material

Ultrareliable Composite Phase Change Material for Battery Thermal Management Derived from a Rationally Designed Phase Changeable and Hydrophobic Polymer Skeleton

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

Using surface-modified UiO-66 with hierarchical pores to pack polyethylene glycol for phase change thermal energy storage: Experiment and molecular dynamics simulations