Two-Phase Isochoric Heat Capacity, Phase Transition, and Theoretically Important Physical Parameters of Methyl Dodecanoate
Abdulagatov, I. M.
DOI: https://doi.org/10.1007/s10765-024-03386-4
2024-06-11
International Journal of Thermophysics
Abstract:The two-phase isochoric heat capacity ( VT ), liquid–gas phase transition ( , ), vapor-pressure ( , ), and thermal -pressure coefficient of methyl dodecanoate, a key biofuels component, have been measured along nine liquid isochores between (180.90 and 845.31) kg·m −3 and three near-critical liquid and vapor (180.90, 234.52, and 374.11) kg·m −3 isochores. The temperature range covers the liquid–vapor phase transition temperature for each measured isochore to near the thermal decomposition temperature, 450 K. The measurements were performed using a high-temperature and high-pressure, nearly constant-volume adiabatic calorimeter previously used for the measurements of the VT relationship of biofuel components in the two- and single-phase region. The combined expanded uncertainty of the density ( ρ ), temperature ( T ), and isochoric heat capacity ( ) measurements at the 95% confidence level with a coverage factor of k = 2 is estimated to be 0.15%, 15 mK, and 2%, respectively. The isochoric heat capacity discontinuity point was used as the criteria of the liquid–gas phase transition temperature, . For each experimental liquid isochore, most measurements were concentrated in the immediate vicinity of the liquid–gas phase transition temperature ( ) to precisely determine the phase boundary properties ( , , , and ) using an isochoric heat -capacity abrupt-behavior technique. For nine liquid isochores between (745.16 and 845.31) kg·m −3 the phase transition temperatures ( ) were experimentally determined. For two vapor (180.90 and 234.52) kg·m −3 and liquid near-critical (374.11) kg·m −3 isochores, for which the transition temperatures are very high (above the thermal decomposition temperature, 473 K), we failed to reach the phase-transition temperatures, , because for these isochores the thermal decomposition of methyl dodecanoate occurs before reaching the phase transition temperature (above 673 K). The measured two-phase ( ) isochoric heat capacities as a function of specific volume ( V ) along the various isotherms (below 473 K) were used to accurately estimate the values of the second temperature derivatives of chemical potential, , and vapour-pressure, , based on the Yang–Yang theoretical relation. The contributions of the vapour-pressure, , and the chemical potential, , to the heat capacities of the measured total two-phase were estimated as a function of temperature. In addition, measured and phase boundary ( , , ) property data were used to calculate key thermodynamic property data , , , , , , along the saturation curve. The measured vapor-pressure ( − -Abstract Truncated-
thermodynamics,mechanics,chemistry, physical,physics, applied