Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

The characteristics of flows past a circular cylinder with heat transfer in the proximity to the wall at different gap ratios

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Flow of Power-Law Fluid Past a Circular Cylinder in the Vicinity of a Moving Wall

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

Three-Dimensional Direct Numerical Simulation of Flow past A Near-Wall Circular Cylinder: Combined Effects of Gap Ratio and Boundary Layer Thickness on Flow Profiles and Pressure Distribution

Periodic Fluid Flow And Heat Transfer In A Square Cavity Due To An Insulated Or Isothermal Rotating Rectangular Object

Vortex structures and behavior of a flow past two rotating circular cylinders arranged side-by-side

Research on the flow around a circular cylinder near a wall for shear-thinning power-law fluids

FUNDAMENTAL AREAS OF PHENOMENOLOGY (INCLUDING APPLICATIONS): Vortex Structures and Behavior of a Flow Past Two Rotating Circular Cylinders Arranged Side-by-Side

Numerical Study on Flow Past a Confined Half Cylinder in Two Bluff Arrangements

Non-isothermal Flow Past a Heated Circular Cylinder in Subcritical Regime: a Numerical Investigation Based on Large-Eddy Simulation

Numerical analysis of the flow over four side-by-side square cylinders with different gaps

Gas slip flow and heat transfer over a semi-confined cylinder in proximity to a solid wall

Numerical Study on the Vortex Motion Patterns Around a Rotating Circular Cylinder and Their Critical Characters

A numerical study on dynamic flows past three tandem inclined elliptic cylinders near moving wall

Laminar flow and convective heat transfer characteristics of plain and wavy wall cross confined circular cylinder

Analysis of Flow and Heat Transfer Characteristics Around Oval-Shaped Cylinder

Turbulent wake characteristics for a circular cylinder in proximity to a moving wall

Numerical Study on Compressible Flow Arounda Circular Cylinder in Proximity to the Wall

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

Numerical study on the flow control mechanisms of an off-surface circular cylinder for wall-bounded flows with separation