Abstract:The thermally regenerative electrochemical cycle (TREC) is a promising technology for converting low-grade heat (<100 °C) to electrical power. In this work, the TREC with the NiHCF cathode and Zn anode achieves a markedly high thermopower (α) of −1.575 mV K–1 and a heat-to-electricity efficiency of 2.41% at the temperature difference of 30 °C (equivalent to 25.15% of Carnot efficiency), surpassing all the existing TREC systems. For the first time, the mixed membranes with mixed pH electrolytes are introduced in the TREC systems to boost α to a record-high value of −2.270 mV K–1. The proposed thermodynamic framework advances the understanding on the origin of α and electrochemical potential, which will guide people to engineer TRECs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.0c02322?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.0c02322</a>.Fabrication of electrodes and cells as well as the temperature control for the electrochemical testing, long-term cycling results of the cells; scanning electron microscopy (SEM), thermopower vs temperature graphs, Raman spectra, heat capacity change with temperature graph, X-ray diffraction (XRD), cyclic voltammetry (CV), electrochemical testing of thermopower, cycle life of the NiHCF/K2SO4/Zn and NiHCF/ZnNH3 systems, anolyte performance, TREC data, NiHCF/ZnNH3 performance, voltage response; theoretical analysis, including the heat capacity study; the calculation of thermopower and efficiency of two systems; tables of thermodynamic parameters, working conditions, and definitions of physical quantities, (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.0c02322/suppl_file/nz0c02322_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Engineering of Solvation Entropy by Poly(4-styrenesulfonic acid) Additive in an Aqueous Electrochemical System for Enhanced Low-Grade Heat Harvesting

Converting Heat to Electrical Energy Using Highly Charged Polyoxometalate Electrolytes

Anion Effects on Thermopower of Electrochemical Systems for Low-Grade Heat Harvesting

Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment

Solvation Engineering via Fluorosurfactant Additive Toward Boosted Lithium-Ion Thermoelectrochemical Cells

In-situ deposition to synthesize photothermal materials for enhanced solar-driven interfacial evaporation and gradient materials for electricity generation

Design of poly(3,4-ethylenedioxythiophene): polystyrene sulfonate-polyacrylamide dual network hydrogel for long-term stable, highly efficient solar steam generation

Hydrothermally Stimulated Molecular Interfaces for Augmented Electron Delocalization in Wet-Chemical Phosphorus Recovery from Incineration Ash of Sewage Sludge

Thermal energy storage and solar energy utilization enabled by novel composite sodium acetate trihydrate/sodium dihydrogen phosphate dihydrate phase change materials

A Facile Surface Treatment Utilizing Binary Mixtures of Ammonium Salts and Polar Solvents for Multiply Enhancing Thermoelectric PEDOT: PSS Films

Insights into the Thermopower of Thermally Regenerative Electrochemical Cycle for Low Grade Heat Harvesting

PEDOT:PSS Films With Very High Thermoelectric Properties Through Water‐Swollen Assisted Reduction With a Tetrakis(dimethylamino)ethylene Solution

A Molecularly Engineered Zwitterionic Hydrogel with Strengthened Anti‐Polyelectrolyte Effect: from High‐Rate Solar Desalination to Efficient Electricity Generation (Adv. Funct. Mater. 43/2023)

Coupling Electro-Chemo- Thermodynamics with Water in Salt (WIS) Electrolyte for Enhanced Pseudocapacitive Charge Storage

Polyacid doping-enabled efficient solar evaporation of polypyrrole hydrogel

Approaching 19% Efficiency and Stable Binary Polymer Solar Cells Enabled by a Solidification Strategy of Solvent Additive

Isomerized Green Solid Additive Engineering for Thermally‐Stable and Eco‐Friendly All‐Polymer Solar Cells with Approaching 19% Efficiency

Self-Floating Polydopamine/Polystyrene Composite Porous Structure via a NaCl Template Method for Solar-Driven Interfacial Water Evaporation

A Novel and Green Method for Preparing Highly Conductive PEDOT:PSS Films for Thermoelectric Energy Harvesting

Enhancing the Stability of Porphyrin Dye-Sensitized Solar Cells by Manipulation of Electrolyte Additives