Abstract:Rolling bodies in cageless ball bearings without cage control will always hit each other. This causes the rolling bodies to wear out faster and decreases the bearing's performance. But most of the available references only look at how well the bearing works when the cage is in place. They do not look at how the inner ring's dynamic response changes when the cage is removed and the rolling elements' motion changes. On the basis of this, a nonlinear rolling-body dynamics model with six degrees of freedom and contact between rolling bodies is suggested. The dynamics model of an automatic discrete system is built on the motion coupling and functional slot discrete theories. The power hardware re-turn method is used to figure out how to solve the dynamics model. The results show that after the rotor falls into the inner ring, the rolling bodies will cause cumulative collision for a short time. Then, because of the function slot, the occasional collision between the rolling bodies would not cause cumulative collision again, and the inner ring motion will be more stable. When the speed of the rotor's fall goes up, the rolling bodies hit each other more often. This makes the inner ring move more steadily, but there is a limit. To make sure that the theoretical analysis and the results of the theoretical solution are right, a high-speed camera was used. To make sure that the theoretical analysis and the results of the theoretical solution are right, we built a bearing test platform to take pictures of the rolling body of the bearing as it moved. The image processing program is used to figure out the rolling body's angular speed, compare the test results to the theoretical study and make sure that the theoretical study is right. The theoretical study is compared to the test results to see if the theoretical study is right.

Investigation on dynamic behaviors of roller bearing in the planetary gear set under revolution-rotation coupled conditions

Dynamic Forces and Vibrations of the Planetary Gear-Set Radial Bearings with the Roller Dimension Deviation

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Dynamic modeling and vibration analysis of planetary gear sets concerning mesh phasing modulation

Investigation on Dynamic Characteristics of High Speed Bearing Cage

Nonlinear dynamics of planetary roller screw mechanism

Vibration analysis of a double-row planetary gear set considering the sun gear axial position

Dynamic model and load sharing performance of planetary gear system with journal bearing

Translation torsion coupling dynamic modeling and nonlinearities investigation of non-circular planetary gear systems

Three-dimensional dynamic modeling and analytical method investigation of planetary gears for vibration prediction

Dynamic Responses of the Planetary Gear Mechanism Considering Dynamic Wear Effects

Vibration Analysis of the Double Row Planetary Gear System for an Electromechanical Energy Conversion System

Planetary Gearbox Dynamic Modeling Considering Bearing Clearance and Sun Gear Tooth Crack

A Vibration Model for Fault Diagnosis of Planetary Gearboxes with Localized Planet Bearing Defects

Dynamic modeling and analysis of planetary gear train system considering structural flexibility and dynamic multi-teeth mesh process

Dynamic Analysis of the Bearing-Rotor System with the Variation of Cage's Pocket Hole Diameter

A Tribo-Dynamic Based Pitting Evolution Model of Planetary Gear Sets: A Topographical Updating Approach

Dynamic modeling and analysis of high-speed flexible planetary gear transmission systems

Dynamic modeling and vibration analysis for the gear-rotor-bearing system with localized failures

Study on Dynamics of Rolling Bearings

Research on multi-body dynamic model of automatic discrete system for protection bearing without cage