Abstract:Cellular lattices with architectural intricacy or metamaterials have gained a substantial amount of attention in the past decade due to the recent advances in additive manufacturing methods. The lattice topology controls its physical and mechanical properties; therefore, the main challenge is selecting the appropriate lattice topology for a desired function and application. In this work, we comprehensively study the topology–property relationship of three classes of polymer metamaterials based on triply periodic minimal surfaces (TPMS) of sheet/shell and ligament types, and other types of well-known strut-based lattices. The study uses a holistic approach of designing, additive manufacturing, microstructural characterization, and compressive uniaxial mechanical testing of these polymer lattices that are 3D-printed using the laser powder bed fusion technique known as selective laser sintering (SLS). In total, 55 lattices with different topologies and relative densities were 3D-printed and tested. Printing quality was assessed using scanning electron microscopy and micro-computed tomography. The extracted mechanical properties of elastic modulus, yield strength, plateau strength, and energy absorption are thoroughly compared between the different lattice architectures. The results show that all the investigated ligament-based TPMS polymer lattices exhibit bending-dominated elastic and plastic behavior, indicating that they are suitable candidates for energy absorbing applications. The sheet-based TPMS polymer lattices, similarly to the well-known Octet-Truss lattice, exhibited an elastic stretching-dominated mode of deformation and proved to have exceptional stiffness as compared to all other topologies, especially at low relative densities. However, the sheet-based TPMS polymer lattices exhibited a bending-dominated plastic behavior which is mainly driven by manufacturing defects. Overall, however, sheet-based TPMS polymer lattices exhibited the best mechanical properties, followed by strut-based lattices and finally by ligament-based TPMS lattices. Finally, it is depicted that at high relative densities, the mechanical properties of lattices of various architectures tend to converge, which implies that the topological effect is more significant at low relative densities. Generally, this study provides important insights about the selection of polymer mechanical metamaterials for various applications, and shows the superiority of TPMS-based polymer metamaterials as compared to several other classes of polymer mechanical metamaterials.

Strut and stochastic polymer reinforcement interpenetrating phase composites: Static, strain-rate and dynamic damping performance

Mechanical Performance of 3D Printed Interpenetrating Phase Composites with Spinodal Topologies

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Mechanical behavior of entangled metallic wire mesh–silicone rubber interpenetrating phase composites under quasistatic compression

Interpenetrating Phase Composite Foam Based on Porous Aluminum Skeleton for High Energy Absorption

Mechanical properties of 3D printed interpenetrating phase composites with TPMS architectures

The near-isotropic elastic properties of interpenetrating composites reinforced by regular fibre-networks

Biomimetic Staggered Composites with Highly Enhanced Energy Dissipation: Design, Modeling, and Test

Multi-directional freeze-casting of interpenetrating phase composites with multi-aligned structure, nearly isotropy, high performance

Molecular dynamics of ionic polymer-metal composites

Mechanical and viscoelastic characterization of Al 2 O 3 based polymer nanocomposites: An experimental and molecular dynamics simulation approach

Enhanced mechanical and thermal properties in 3D printed Al 2 O 3 lattice/ epoxy interpenetrating phase composites

Multiscale modeling for mechanical property estimation of polymer matrix composites with nano- and micro-scale reinforcements

A comprehensive review of the mechanisms and structure of interpenetrating phase composites with emphasis on metal-metal and polymer-metal variants

Constructing dual-scale high-entropy alloy/polymer interpenetrating networks to develop a lightweight composite with high strength and excellent damping capacity

Shock mitigation and failure mechanism of copper foam/paraffin phase change reinforced composites

On the Effect of Lattice Topology on Mechanical Properties of SLS Additively Manufactured Sheet-, Ligament-, and Strut-Based Polymeric Metamaterials

Unprecedented Strength Enhancement Observed in Interpenetrating Phase Composites of Aperiodic Lattice Metamaterials

Stress Wave Propagation and Decay Based on Micro-Scale Modelling in the Topology of Polymer Composite with Circular Particles

Enhancement of stiffness and dynamic mechanical properties of polymers using single-walled-carbon-nanotube – a multiscale finite element formulation study

Bioinspired dual-phase composite metamaterial for customized deformation behavior and performance characteristic