Abstract:The rate-determining step of the photoelectrochemical (PEC) water splitting is the water oxidation reaction at the photoanode, which is 4 orders of magnitude slower than the water reduction reaction at the photocathode. In a conventional process to accelerate the water oxidation, oxygen evolution cocatalysts (OECs) are usually used on the surface of a photoanode. As an alternative strategy, we considered employing a composite photoanode made up of a semiconductor and carbon spheres, for it is expected that the photogenerated electrons on the semiconductor particles can be captured by the carbon spheres as electron reservoirs and leave the photogenerated holes on the surface of the semiconductor particles, which promotes the effective separation of photogenerated electrons and holes. More importantly, the holes accumulated in the valence band accelerate the water oxidation reaction rate with the rapid release of electrons stored on the carbon sphere. Therefore, the composite photoanode achieves a higher photocurrent at a lower applied bias. We provide a proof of concept for this strategy by preparing a composite photoanode by combining bismuth vanadium oxide BiVO4 with carbon spheres and find that the resulting photoanode displays a remarkable enhancement in the rate of the photoanode water oxidation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c03671?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c03671</a>.TEM image of CSs and SEM image of a special C-BVO sample; top-view SEM images of BVO and C-BVO photoanodes; HRTEM image of the as-prepared C-BVO photoanode; Tauc plots of BVO and C-BVO based on the diffuse reflectance spectra; DRS of BVO containing different amounts of CSs and zoomed-in view of the absorption spectra; cyclic voltammograms of the BVO and C-BVO photoanodes under dark and light and the charge–discharge curve of the C-BVO photoanode under dark and light; surface potential mapping of the BVO and C-BVO photoanodes; cyclic voltammograms and calculated specific capacitances of 0.25C-BVO, 0.5C-BVO, C-BVO, and 2C-BVO photoanodes; J vs V curves measured for the BVO, C-BVO, and CoPi-BVO photoanodes and for BVO photoanodes containing different amounts of CSs; J vs V diagrams of three additional BVO and C-BVO photoanodes; comparison of the AM 1.5G sunlight spectrum and UV–vis absorption spectra of the BVO and C-BVO photoanode; close-ups of the stability tests of BVO and C-BVO photoanodes; transient open circuit voltage vs time plots of BVO and C-BVO photoanodes measured at light and dark; measured H2/O2 evolution of C-BVO and BVO photoanodes; J vs V plots of BVO and C-BVO photoanodes measured in KPi and KPi + NaVO3 solution and tested at 0.9 V vs RHE in KPi and KPi + NaVO3 solution; comparison of the J vs V plots of BVO photoanodes compounded with carbon quantum dots and carbon spheres; model diagrams of the specific mechanism of charge and discharge of the C-BVO photoanode and a possible mechanism on the enhancement of the PEC water oxidation of the C-BVO photoanode; and separation and injection efficiencies of BVO and CQD-modified BVO photoanodes (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c03671/suppl_file/cs0c03671_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting Photoelectrochemical Water Splitting of Bismuth Vanadate Photoanode via Novel Co-catalysts of Amorphous Manganese Oxide with Variable Valence States

Dual Modification of BiVO4 Photoanode by Enriching Bulk and Surface Oxygen Vacancies for Enhanced Photoelectrochemical Performance.

Enhanced bulk and interfacial charge transfer in Fe:VOPO4 modified Mo:BiVO4 photoanodes for photoelectrochemical water splitting

Synergistic Effect of Co3(HPO4)2(OH)2 Cocatalyst and Al2O3 Passivation Layer on BiVO4 Photoanode for Enhanced Photoelectrochemical Water Oxidation

Boosting the Photoelectrochemical Performance of BiVO 4 Photoanodes by Modulating Bulk and Interfacial Charge Transfer

Surface Modulation Inducing Bismuth-Rich Surface Composition in BiVO 4 for Efficient Photoelectrochemical Water Splitting

Boosting Photoelectrochemical Water Oxidation Performance of Nanoporous BiVO4 Via Dual Cocatalysts Cobaloxime and Ni-OEC Modification

Enhanced photoelectrochemical water oxidation over a surface hydroxylated BiVO4 photoanode: advantageous charge separation and water dissociation

Synergistic Surface Engineering of BiVO4 Photoanodes for Improved Photoelectrochemical Water Oxidation

Promoting the Photoelectrochemical Properties of BiVO4 Photoanode via Dual Modification with CdS Nanoparticles and NiFe-LDH Nanosheets

Boosting the Photoactivity of BiVO4 Photoanodes by a ZnCoFe-LDH Thin Layer for Water Oxidation

Ligand Engineered MnO Catalytic Nanoparticles As an Efficient Charge Transfer Mediator for Photoelectrochemical Water Oxidation

BiVO4 photoanode decorated with cobalt-manganese layered double hydroxides for enhanced photoelectrochemical water oxidation

Organic Ligand Nanoarchitectonics for BiVO 4 Photoanodes Surface Passivation and Cocatalyst Grafting

Enhancing the Photoelectrochemical Water Oxidation Reaction of BiVO 4 Photoanode by Employing Carbon Spheres as Electron Reservoirs

Organic ligand nanoarchitectonics for BiVO4 photoanodes surface passivation and cocatalyst grafting

Nitrogen-doped Cobalt-Iron Oxide Cocatalyst Boosting Photoelectrochemical Water Splitting of BiVO4 Photoanodes

Coupling surface modification with cocatalyst deposition on BiVO4 photoanode to enhance charge transfer for efficient solar-driven water splitting

Improving the photoelectrochemical stability of a bismuth vanadate photoanode for solar water oxidation

Green light all the way: Triple modification synergistic modification effect to enhance the photoelectrochemical water oxidation performance of BiVO4 photoanode

The hydrophilic treatment of a novel co-catalyst for greatly improving the solar water splitting performance over Mo-doped bismuth vanadate