Abstract:To improve the potassium availability of feldspar at ordinary temperatures, the mechanical grinding and addition of sodium hydroxide/salts were employed to study the effects of mechanical activation and strong alkali addition on particle characteristics, water-soluble potassium, and the available potassium of feldspar. A laser particle size analyzer was utilized for the direct determination of particle size distribution (PSD) using ground samples. The Brunauer-Emmett-Teller (BET) method was employed for specific surface areas. X-ray diffraction (XRD) was employed for structural characterization, scanning electron microscopy (SEM) for morphology exploration, and energy dispersive spectroscopy (EDS) to determine the chemical composition of potassium feldspar powder. The results revealed that the mechanical activation of potassium feldspar could reduce the particle size and produce agglomerated nanoparticles in the later period. The addition of NaOH and sodium salt did not cause agglomeration, and NaOH dissolved the nanoparticles. The water-soluble potassium content of feldspar in each treatment increased during mechanical grinding, from 21.64 mg kg-1 to 1495.81 mg·kg-1, by adding NaOH 5% weight of potassium feldspar powder and to 3044.08 mg·kg-1 by adding NaOH 10% weight with effects different from those of mechanical shaking. By comparison, only 162.93 mg·kg-1 water-soluble potassium was obtained by adding NaOH 5% weight. The dissolved potassium in the former case was significantly higher than in the latter, and the addition of NaOH and sodium salts significantly enhanced the water-soluble potassium contents due to ion exchange. Furthermore, the addition of sodium hydroxide improved the water-soluble potassium due to its mechanochemical action on potassium feldspar. The mechanical energy changed the crystal structure of potassium feldspar, explaining the increase in available potassium. The addition of sodium salts did not promote change in the feldspar's structure, thereby did not raise the available potassium content. The reason for this was related to the mechanochemical action on sodium hydroxide and feldspar, which could promote the dissolution of fine particles, thereby incrementing the available potassium.

Pozzolanic activity and hydration properties of feldspar after mechanical activation

Activation and Toxicity of Slag-fly Ash-fluorgypsum Cementitious Material

Mechanical activation of siliceous tailings and its application as cement admixtures

HYDRATION PROPERTIES OF MECHANICALLY ACTIVATED MUSCOVITE IN THE PRESENCE OF CALCIUM OXIDE

Mechanical activation of fly ash:effect on performance and mechanism of resulting geopolymer

Mechanism of Potassium Release from Feldspar by Mechanical Activation in Presence of Additives at Ordinary Temperatures

Using mechanical activation of quartz to enhance the compressive strength of metakaolin based geopolymers

Investigation of the Pozzolanic Activity Improvement of Yellow Phosphorus Slag with Thermal Activation

Effect of Activated Siliceous Wastes Incorporated as Mineral Admixtures on the Rheological Properties of Cement Paste: Insights into Their Physicochemical Interactions in Suspension

Performances and microstructure of one-part fly ash geopolymer activated by calcium carbide slag and sodium metasilicate powder

Improving mechanical properties of hemihydrate phosphogypsum via alkali-activated mineral admixtures

Effect of Alkali and Sulfate on the Hydration Characteristic of Cement-Based Materials Containing Coal Gasification Slag

Effects of wet grinding combined with chemical activation on the activity of iron tailings powder

Pozzolanic Reactivity and Hydration Products of Cementitious Material Prepared Using Molybdenum Tailings

Calorimetric study of the pozzolanic potential developed by the mechanochemical activation of kaolin clay

Effects of Spodumene Flotation Tailings on Mechanical Properties of Acid-Based Geopolymer Mortar

The bio-activation of pozzolanic activity of circulating fluidized-bed fly ash by Paenibacilllus mucilaginosus

On the grinding effects of high-silicon iron tailings

Influence of Activators on Mechanical Properties of Modified Fly Ash Based Geopolymer Mortars

The Effect of Wet-grinding on the Properties of Glass Powder and Its Application in Cement Based Materials

Mechanism of Different Mechanically Activated Procedures on the Pozzolanic Reactivity of Binary Supplementary Cementitious Materials