Abstract:(such as anodization time, potential/current, electrolyte, and temperature). [ 4,9,10 ] However, as an n-type wide band gap semiconductor, TiO 2 can solely absorb the UV light, which accounts for less than 5% over the full solar resource, thus signifi cantly limiting its widespread applications. In addition, the rapid recombination rate of photogenerated electronhole pairs of TiO 2 leads to a low quantum effi ciency and poor photocatalytic activity. In order to address these obstacles, a plethora of strategies have been explored to improve the photoresponse of 1D TiO 2 NTAs. For example, metal/ nonmetal impurity doping was shown to introduce mid-gap energy levels, which were expected to control the band gap response of the TiO 2 NTAs and enhance their visible spectrum properties. [ 11–15 ] In particular, the growth of TiO 2 -based composites (core-shell geometry or nanoparticle decoration) is considered to be one of the most promising routes due to the improvement of charge carrier separation. [ 16–19 ] It is of paramount importance to design effi cient semiconductorbased composites with desirable architectural structure/ morphology enabling synergistic impacts on the overall performance of photocatalytic and photoelectrochemical applications. Molybdenum disulfi de (MoS 2 ), a member of the layered transition metal dichalcogenides family, has been a focus of study for wide applications due to its high activity, excellent morphologies, good electronic and optical properties, such DOI: 10.1002/smll.201503441 A novel type of hierarchical nanocomposites consisted of MoS 2 nanosheet coating on the self-ordered TiO 2 nanotube arrays is successfully prepared by a facile combination of anodization and hydrothermal methods. The MoS 2 nanosheets are uniformly decorated on the tube top surface and the intertubular voids with fi lm appearance changing from brown to black color. Anatase TiO 2 nanotube arrays (NTAs) with clean top surfaces and the appropriate amount of MoS 2 precursors are key to the growth of perfect compositing TiO 2 @MoS 2 hybrids with signifi cantly enhanced photocatalytic activity and photocurrent response. These results reveal that the strategy provides a fl exible and straightforward route for design and preparation nanocomposites based on functional semiconducting nanostructures with 1D self-ordered TiO 2 NTAs, promising for new opportunities in energy/environment applications, including photocatalysts and other photovoltaic devices. Nanotube Arrays

In Situ Growth of Metallic 1T-MoS 2 on TiO 2 Nanotubes with Improved Photocatalytic Performance

In-Situ Generation of Nano TiO2 from MIL-125(Ti) and Its Role in Boosting the Photocatalytic Degradation of Tetracycline Hydrochloride

Hydrothermal synthesis of MoS2 nanosheet loaded TiO2 nanoarrays for enhanced visible light photocatalytic applications.

3D MoS2@TiO2@poly(methyl Methacrylate) Nanocomposite with Enhanced Photocatalytic Activity.

In-Situ generation of nano TiO 2 from MIL-125(Ti) and its role in boosting the photocatalytic degradation of tetracycline hydrochloride

Carbon nanotubes as electron mediators for CNTs/CdS/MoS 2 high efficient photodegradation of tetracycline under visible light

Metallic 1t′mos2 Boosts Graphitic C3N4 for Efficient Visible-light Photocatalysis

MoS<sub>2</sub> quantum dots@TiO<sub>2</sub> nanotube composites with enhanced photoexcited charge separation and high-efficiency visible-light driven photocatalysis.

Preparation of a Hybrid TiO 2 and 1T/2H-MoS 2 Photocatalyst for the Degradation of Tetracycline Hydrochloride

Facile Synthesis of Mn-doped TiO2 Nanotubes with Enhanced Visible Light Photocatalytic Activity

1T and 2H mixed phase MoS2 nanobelts coupled with Ti3+ self-doped TiO2 nanosheets for enhanced photocatalytic degradation of RhB under visible light

One-Step Solvothermal Synthesis of Mos2/Tio2 Nanocomposites with Enhanced Photocatalytic H-2 Production

Molybdenum atomic sites embedded 1D carbon nitride nanotubes as highly efficient bifunctional photocatalyst for tetracycline degradation and hydrogen evolution

In Situ Integration of a Metallic 1t‐mos2/cds Heterostructure As a Means to Promote Visible‐Light‐Driven Photocatalytic Hydrogen Evolution

Hierarchical MoS<sub>2</sub> Nanosheet@TiO<sub>2</sub> Nanotube Array Composites with Enhanced Photocatalytic and Photocurrent Performances

In Situ Composite of Co-MOF on a Ti-based Material for Visible Light Multiphase Catalysis: Synthesis and the Photocatalytic Degradation Mechanism

In Situ Growth Of Tio2 Nanocrystals On G-C3n4 For Enhanced Photocatalytic Performance

Fabrication and Photocatalytic Activity of TiO 2 /sio 2 Composite Nanotubes

Fabrication of a High-Adsorption N–TiO2/Bi2MoO6 Composite Photocatalyst with a Hierarchical Heterostructure for Boosted Weak-Visible-light Photocatalytic Degradation of Tetracycline

When Mos2 Meets Tio2: Facile Synthesis Strategies, Hybrid Nanostructures, Synergistic Properties, And Photocatalytic Applications

Difference in performance and mechanism for methylene blue when TiO2 nanoparticles are converted to nanotubes