Abstract:In this study, we successfully synthesized a TiO2/CuO nanocomposite using the aqueous extract of Impatiens tinctoria A.rich. leaf extract as a capping, reducing, and stabilizing agent for the first time in an environmentally friendly, low-cost, straightforward, and sustainable technique. Numerous characterization techniques such as ultraviolet-visible diffuse reflectance spectroscopy (UV-vis-DRS), photoluminescence (PL), Raman spectroscopy, Fourier-transform infrared (FTIR), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and high resolution TEM (HRTEM) were used to characterize the obtained TiO2/CuO nanocomposite. XRD verified that the TiO2/CuO nanocomposite has an average crystallite size of about 21 nm. The TEM result revealed an average particle size of 29 nm for the biosynthesized TiO2/CuO NC. The HRTEM analysis showed the presence of polycrystalline structures with the predominant lattice fringes 0.352 and 0.19 which were attributed to anatase phase TiO2 in the crystal plane of (101) and (200), respectively. The lattice fringes for monoclinic CuO were observed with values of 0.213 and 0.252 for the lattice planes of (111) and (111̅), respectively. The photoluminescence spectroscopic analysis revealed that the TiO2/CuO NC showed the lowest intensity compared to the pristine TiO2 and CuO indicating the reduction of exciton recombination in the case of the TiO2/CuO NC. The BET analysis showcased the formation of mesoporous materials with a surface area of 87.5 m2/g. The photocatalytic degradation performance of the biosynthesized TiO2, CuO, and TiO2/CuO nanomaterials against the potentially harmful MB dye was tested using the light source of a 150 tungsten-halogen lamp with a wavelength range of 360-2800 nm. The factors affecting photodegradation efficiencies like catalyst dose (20 mg), dye concentration(15 ppm), pH (9), and reaction time (90 min) were optimized for the degradation of the MB dye. The TiO2/CuO catalyst showed the highest degradation efficiency of 99% under the optimized conditions. The degradation rate of the MB dye in the presence of the TiO2/CuO NC was evaluated and found to be fitted to the pseudo-first-order kinetics with a rate constant of 0.03 min-1. The reusability test of the TiO2/CuO catalyst showed its good stability.

Difference in performance and mechanism for methylene blue when TiO2 nanoparticles are converted to nanotubes

Synthesis of g-C3N4/Bi2O3/TiO2 composite nanotubes: enhanced activity under visible light irradiation and improved photoelectrochemical activity

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Heterogeneous Photocatalysis of Methylene Blue over Titanate Nanotubes: Effect of Adsorption.

Interstitial N-Doped TiO2 for Photocatalytic Methylene Blue Degradation under Visible Light Irradiation

Synthesis and Characterization of Cnt / Tio2 Photoelectrocatalytic Electrodes for Methlene Blue Degradation

Enhanced Photoelectric Catalytic Degradation of Methylene Blue Via TiO2 Nanotube Arrays Hybridized with Graphite-Like Carbon

Construction of (001)-TiO2/g-C3N4 heterojunction for enhanced photocatalytic degradation of methylene blue

Probing the Effect of Nanotubes on N-nitrosodimethylamine Photocatalytic Degradation Efficiency and Reaction Pathway

Efficient adsorption and photocatalytic degradation of organic contaminants using TiO2/(Bi2O3/Bi2O2.33) nanotubes

Synthesis and Photocatalytic Performance of Nitrogen and Nickel Codoped TiO2 Nanotubes

The Study on Preparation and the Effect of Adsorption over Photocatalytic Activities of Cu2O/titanate Nanotubes (Cu2o/tnts)

Synthesis, Characterization and Photocatalytic Activity of Visible-light-driven N-P-codoped TiO_2 Nanotubes

Biosynthesis of TiO2/CuO and Its Application for the Photocatalytic Removal of the Methylene Blue Dye

Fabrication and Electro-Photolysis Property of Carbon Nanotubes/Titanium Composite Photocatalysts for Methylene Blue

[Research of the Photoelectrocatalysis Degradation of Methylene Blue of TiO2 Nanotube Array Films Annealed in Oxygen Atmospheres].

High Photocatalytic and Adsorptive Performance of Anatase-Covered Titanate Nanotubes Prepared by Wet Chemical Reaction

<i>In situ</i> growth of TiO<sub>2</sub> nanoparticles on nitrogen-doped Ti<sub>3</sub>C<sub>2</sub> with isopropyl amine toward enhanced photocatalytic activity

Preparation of Titania Nanotube and Its Photocatalytic Performance for MB Photo-Degradation

Comparison of the Photocatalytic Performance of TiO2/AC and TiO2/CNT Nanocomposites for Methyl Orange Photodegradation.

Facile synthesis of TiO2-carbon composite doped nitrogen for efficient photodegradation of noxious methylene blue dye