Abstract:We propose and experimentally demonstrate broadband, low-crosstalk, and low-loss polarization splitter-rotators (PSRs) with optimized taper structures at 1550-nm and 1310-nm wavelengths, respectively. The PSRs consist of particle swarm optimization (PSO) based bi-level tapers and shortcuts to adiabaticity (STA) based ridge-waveguide couplers. Ridge waveguides are introduced to increase the coupling coefficient of the STA based coupler and to reduce the crosstalk from TM0 mode. The measured polarization conversion losses (PCLs) and crosstalk (CT) are less than 0.6 dB and –20 dB, respectively, from 1500 nm to 1600 nm wavelength for the 1550-nm PSR. The measured PCLs and CT are less than 1 dB and –22 dB, respectively, from 1260 nm to 1340 nm wavelength for the 1310-nm PSR. High-performance PSRs are preferred to realize polarization diversity for silicon photonic circuits. Various structures of PSR have been proposed, including asymmetrical directional coupler (ADC) [1,2], bi-level taper plus ADC [3], bi-level taper plus multimode interference coupler [4], bi-level taper plus adiabatic coupler [5], and bi-level taper plus asymmetric Y-junction [6]. However, none of them can have a PCL value less than 1 dB and a CT value less than –20 dB within a 80-nm-wide wavelength range. The scanning electron microscope (SEM) pictures of the 1550-nm and 1310-nm PSRs are shown in Fig. 1 and Fig. 2, respectively. The PSR consists of a TM0-TE1 bi-level taper and a TE0-TE1 demultiplexer. The bi-level tapers are optimized based on the PSO method. The tapers, which are 20-μm long, are divided into 4 and 10 segments with equal length for the 1550-nm and 1310-nm PSR respectively. The maximum values of the average TM0–TE1 conversion efficiencies over the wavelengths from 1500 nm to 1600 nm and from 1260 nm to 1360 nm are set to the Figure of Merit for the 1550-nm and 1310-nm PSRs, respectively. The TE0-TE1 demultiplexer is optimized based on the STA method [7]. The coupling length is 70 μm. The minimum edge-gaps are 200 nm and 160 nm for the 1550-nm and 1310-nm PSRs, respectively. The total PSR lengths are about 120 μm. Fig. 3 shows the measured results of the 1550-nm PSR. The PCLs and CT are less than 0.6 dB and –20 dB, respectively, from 1500 nm to 1600 nm wavelength. Fig. 4 shows the measured results of the 1310-nm PSR. The PCLs and CT are less than 1 dB and –22 dB, respectively, from 1260 nm to 1340 nm wavelength. The measured broadband operation is limited by the available bandwidth of grating couplers. In conclusion, we have proposed and demonstrated practical PSRs at 1550-nm and 1310-nm wavelengths, respectively. The PSRs show lower PCL less than 1 dB and lower polarization CT less than –20 dB within a 80-nm-wide wavelength range.

High-performance and scalable polarization splitter-rotator based on photonic crystal nanobeam reflection

Research on the Wide-Angle and Broadband 2d Photonic Crystal Polarization Splitter

Design of Wide-Angle and Broad-Band Two-Dimensional Photonic Crystal Polarization Splitter by the Automatic Shaping Mechanism

Broadband and Low-Crosstalk Polarization Splitter-Rotator with Optimized Tapers

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Arbitrary Polarization Conversion with a Photonic Crystal Slab

Polarization splitter-rotators with optimized taper structures

Dual-Core Photonic Crystal Fiber Polarization Beam Splitter Based on a Nematic Liquid Crystal with an Ultra-Short Length and Ultra-Wide Bandwidth

Inverse-Designed Ultra-Compact Polarization Splitter–Rotator in Standard Silicon Photonic Platforms With Large Fabrication Tolerance

High-efficiency Polarization Beam Splitters Based on a Two-Dimensional Polymer Photonic Crystal

Splitting Arbitrary Polarized Light with a Flat Dielectric Metagrating

Numerical Investigation of a Short Polarization Beam Splitter Based on Dual-Core Photonic Crystal Fiber with As2S3 Layer

A Compact and Novel Polarization Beam Splitter Based on Negative Refractive Photonic Crystal Slab

Broadband Integrated Polarization Beam Splitter with Surface Plasmon.

Silicon Polarization Switch Based on Symmetric Polarization Splitter-Rotators

Compact Polarization Beam Splitter Employing Positive/negative Refraction Based on Photonic Crystals of Pillar Type

Design of Compact and Broadband Polarization Beam Splitters Based on Surface Plasmonic Resonance in Photonic Crystal Fibers

Rochon-Prism-Like Planar Circularly Polarized Beam Splitters Based on Dielectric Metasurfaces