Comparative analysis of inlet and outlet cavity designs on the thermal-hydraulic performance of compact heat exchangers for combustion engine exhaust heat recovery
Oumaima Douadi Rajesh Ravi Dikra Bakhchin Mustapha Faqir Elhachmi Essadiqi School of Aerospace and Automotive Engineering,LERMA Laboratory,International University of Rabat,MoroccoOumaima Douadi is a PhD student in the School of Aerospace and Automotive Engineering,at the International University of Rabat,Morocco.Rajesh Ravi is a Professor in the School of the Aerospace and Automotive Engineering,at the International University of Rabat,Morocco.Dikra Bakhchin is a PhD student in the School of Aerospace and Automotive Engineering,at the International University of Rabat,Morocco.Mustapha Faqir is a Dean and Professor in the School of Aerospace and Automotive Engineering,at the International University of Rabat,Morocco.Elhachmi Essadiqi is a Full Professor in the School of Aerospace and Automotive Engineering,at the International University of Rabat,Morocco.
DOI: https://doi.org/10.1080/15567036.2024.2417772
2024-10-19
Energy Sources Part A Recovery Utilization and Environmental Effects
Abstract:Improving the Internal Combustion Engines (ICEs) overall thermal efficiency is crucial to reduce fuel consumption and emissions. To achieve this goal, waste heat recovery from exhaust gases remains the most promising strategy, which involves the utilization of compact heat exchangers. This study evaluates the performance of novel Monolithic Integrated Thermal Exchange Matrixes (MITEMs) designs for recovering exhaust heat from a 70 hp diesel engine, focusing on the impact of inlet/outlet cavities. Computational Fluid Dynamics simulations were employed to analyze the heat transfer rate, pressure drop, and overall thermal-hydraulic performance of different MITEM designs. The Rectangular Channels with Large Cavities (RCLC) design exhibited superior performance, enhancing the heat transfer rate by 14.7% compared to the baseline design while limiting pressure drop increase to 9.2%. The RCLC design increased local Nusselt numbers and heat transfer coefficients by up to 60%, achieving peak velocities of 98 m/s within cross-sectional planes. These findings provide valuable insights for optimizing exhaust heat recovery systems in diesel engines.
energy & fuels,engineering, chemical