Applications of Electric Heating Technology in Vehicle Exhaust Pollution Control

Kai Li,Bing Xiao,Yanjun Wang,Jianli Jia,Xiaodong Wu

DOI: https://doi.org/10.3390/pr12020298

IF: 3.5

2024-01-31

Processes

Abstract:Motor vehicle exhaust is an important cause of atmospheric pollution. Nowadays, mainstream exhaust emission aftertreatment technologies, such as TWC, DOC, SCR, and DPF, usually require sufficient temperature to perform good purification or maintain normal working conditions. Compared with exhaust gas heating technologies such as engine enrichment and fuel injection, electric heating technology can quickly increase the temperature of exhaust gas aftertreatment devices without adverse effects on engine operating conditions. This article introduces the research and progress of electric heating technology combined with traditional aftertreatment devices on major types of vehicles, such as gasoline vehicles, diesel vehicles, motorcycles, and hybrid vehicles, to improve exhaust purification efficiency and its accompanying fuel consumption impact. In addition, the common structure and characteristics of electric heaters, as well as the current status and development trend of electric heating unit technologies such as electric heating power supply are introduced.

engineering, chemical

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is: how to improve the purification efficiency of vehicle exhaust after - treatment systems through electric heating technology, especially during the cold - start phase. Specifically, the paper explores the application of electric heating technology in major types of vehicles such as gasoline cars, diesel cars, motorcycles and hybrid vehicles to improve exhaust purification efficiency and reduce the associated fuel consumption impact.

### Key Problem Analysis

1. **High Emission Problems during Cold - Start**
- During cold - start, the engine temperature is low, resulting in incomplete fuel combustion, which increases the emissions of THC (Total Hydrocarbons) and CO (Carbon Monoxide) in the exhaust.
- After - treatment devices (such as Three - Way Catalyst TWC, Diesel Oxidation Catalyst DOC, Selective Catalytic Reduction SCR and Diesel Particulate Filter DPF) require sufficient temperature to work effectively, and the low temperature of these devices during cold - start limits their catalytic performance.

2. **Limitations of Existing Heating Technologies**
- Traditional exhaust heating technologies (such as engine rich - fuel and fuel injection) can increase the exhaust temperature, but they have an adverse impact on engine operating conditions and cannot rapidly increase the temperature.
- Electric heating technology can rapidly increase the temperature of exhaust after - treatment devices without changing engine operating conditions, thereby significantly reducing pollutant emissions during cold - start.

3. **Application and Development Trend of Electric Heating Technology**
- The paper introduces the research progress of the combination of electric heating technology and traditional after - treatment devices, including the common structures and characteristics of electric heaters, as well as the current situation and development trend of electric heating unit technologies (such as electric heating power supplies).
- Electric heating technology can not only improve catalytic purification efficiency, but also reduce the additional fuel consumption required to increase the exhaust temperature.

### Formula Representation

- Exhaust Temperature Increase Formula: Assuming that the electric heating power is \( P \), the heating time is \( t \), the exhaust mass flow rate is \( \dot{m} \), and the specific heat capacity is \( c_p \), then the exhaust temperature increase \( \Delta T \) can be expressed as:
\[
\Delta T=\frac{P\cdot t}{\dot{m}\cdot c_p}
\]

- Fuel Consumption Increase Formula: Assuming that the electric heating power is \( P \), the generator efficiency is \( \eta_g \), the engine efficiency is \( \eta_e \), then the increase in fuel consumption \( \Delta m_f \) due to electric heating can be expressed as:
\[
\Delta m_f = \frac{P\cdot t}{\eta_g\cdot\eta_e\cdot LHV}
\]
where \( LHV \) is the low heating value of the fuel.

### Summary

By systematically summarizing and analyzing the application of electric heating technology in vehicle exhaust pollution control, the paper aims to provide an effective technical path to meet increasingly stringent emission standards and significantly reduce pollutant emissions during cold - start.