Dynamic Modeling and Control of Supercritical Carbon Dioxide Power Cycle for Gas Turbine Waste Heat Recovery

Bowen Ma,Fan Zhang,Kwang Y. Lee,Hemin Hu,Tao Wang,Bing Zhang
DOI: https://doi.org/10.3390/en17061343
IF: 3.2
2024-03-12
Energies
Abstract:The gas turbine is a crucial piece of equipment in the energy and power industry. The exhaust gas has a sufficiently high temperature to be recovered for energy cascade use. The supercritical carbon dioxide (S-CO2) Brayton cycle is an advanced power system that offers benefits in terms of efficiency, volume, and flexibility. It may be utilized for waste heat recovery (WHR) in gas turbines. This study involved the design of a 5 MW S-CO2 recompression cycle specifically for the purpose of operational control. The dynamic models for the printed circuit heat exchangers, compressors, and turbines were developed. The stability and dynamic behavior of the components were validated. The suggested control strategies entail utilizing the cooling water controller to maintain the compressor inlet temperature above the critical temperature of CO2 (304.13 K). Additionally, the circulating mass flow rate is regulated to modify the output power, while the exhaust gas flow rate is controlled to ensure that the turbine inlet temperature remains within safe limits. The simulations compare the performance of PI controllers tuned using the SIMC rule and ADRC controllers tuned using the bandwidth method. The findings demonstrated that both controllers are capable of adjusting operating conditions and effectively suppressing fluctuations in the exhaust gas. The ADRC controllers exhibit a superior control performance, resulting in a 55% reduction in settling time under the load-tracking scenario.
energy & fuels
What problem does this paper attempt to address?
The problem this paper attempts to address is: how to improve the efficiency and stability of the supercritical carbon dioxide (S-CO₂) Brayton cycle in gas turbine waste heat recovery through dynamic modeling and control strategies. Specifically, the paper focuses on the following aspects: 1. **Dynamic Modeling**: Developed a dynamic model suitable for the S-CO₂ Brayton cycle, including the dynamic characteristics of key components such as the printed circuit heat exchanger (PCHE), compressor, and turbine. 2. **Control Strategies**: Proposed several control strategies to ensure the stability and efficient operation of the system under different conditions. These strategies include using a cooling water controller to maintain the compressor inlet temperature above the critical temperature of CO₂ (304.13 K), adjusting the cycle mass flow rate to change the output power, and controlling the exhaust flow to ensure the turbine inlet temperature is within a safe range. 3. **Performance Comparison**: Compared the performance of a PI controller tuned using the SIMC rules with an active disturbance rejection controller (ADRC) tuned using the bandwidth method through simulations. The results show that the ADRC controller has better control performance in load-following scenarios, reducing the regulation time by 55%. In summary, this paper aims to improve the application effectiveness of the S-CO₂ Brayton cycle in gas turbine waste heat recovery through dynamic modeling and advanced control strategies, thereby achieving higher energy utilization efficiency and system stability.