Abstract:Background: The fracture of bone plate can cause considerable pain for the patient and increase the burden on the public finances. This study aims to explore the failure mechanism of 49 plates retrieved from revision surgery and introduce pure magnesium (Mg) block to improve the biomechanical performance of the plate via decreasing the stiffness and to stimulate the biological response of the plate potentially by the degradation of Mg block. Methods: The morphological analysis and component analysis of the plates were conducted to determine the fracture reason of the plates combining the clinical data. According to the structural feature, the 49 retrieved plates were divided into: traditional plate (TP), asymmetrical plate (AP), reconstructive plate (RP) and central enhancement plate (CEP), and their structure features are normalized in a commercial plate, respectively. The biomechanical performance of the plates was evaluated using a validated femoral finite element model. A block of pure Mg with a thickness of 1 mm, 1.5 mm and 2 mm was also incorporated into the CEP to be assessed. Results: The results indicated that the retrieved plates mainly failed due to fatigue fracture induced by delayed union or nonunion (44/49), and using pure titanium plates in weight-bearing areas increased the risk of fracture compared with Ti alloy plates when the delayed union or nonunion occurred. The TP demonstrated the highest compression resistance and bending resistance, while CEP had the highest rotational resistance. As the thickness of the Mg block was increased, the stress on the plate in compression decreased, but the stress in rotation increased. The plate with a 1.5 mm Mg block demonstrated excellent compression resistance, bending resistance and rotational resistance. Conclusion: Fatigue fracture resulting from the delayed union or nonunion is the primary failure reason of plates in clinic. The incorporation of Mg block into plate improves the biomechanical performance and has the potential to promote bone healing. The plate with a 1.5 mm Mg block may be suitable for use in orthopaedics. The translational potential of this article: This study assessed the failure mechanism of retrieved bone plates and used this data to develop a novel plate incorporating a 1.5 mm block of pure Mg block at the position corresponding to the fracture line. The novel plate exhibited excellent compression resistance, bending resistance and rotational resistance due to the alleviation of stress concentrations. The Mg block has the potential to degrade over time to promote fracture healing and prevents fatigue fracture of plates.

Topology optimization and biomechanical evaluation of bone plates for tibial bone fractures considering bone healing

Optimal Design and Biomechanical Analysis of a Biomimetic Lightweight Design Plate for Distal Tibial Fractures: A Finite Element Analysis

Computational biomechanical analysis of Ti-6Al-4V porous bone plates for lower limb fractures

Biomechanical design of a new proximal humerus fracture plate using alternative materials

Finite element method-based simulation on bone fracture fixation configuration factors for biodegradable embossed locking compression plate

Finite element analysis and optimization studies on tibia implant of SS 316L steel and Ti6Al4V alloy

Finite element model with realistic bone geometries for the optimal design of internal fixation during the fibula healing process

Failure analysis and design improvement of retrieved plates from revision surgery

Impacts of post‐operation loading and fixation implant on the healing process of fractured tibia

Enhanced biomechanical performance of additively manufactured Ti-6Al-4V bone plates

A novel adjustable locking plate (ALP) for segmental bone fracture treatment

Materials evolution of bone plates for internal fixation of bone fractures: A review

Topology optimization of a mandibular reconstruction plate and biomechanical validation

Biomechanical analysis of internal fixation system stability for tibial plateau fractures

Computational analysis of the biomechanical stability of internal fixation of the lateral tibial plateau fracture: A mechanical stability study

Parametric study of patient-specific femoral locking plates based on a combined musculoskeletal multibody dynamics and finite element modeling

Advances in Dynamization of Plate Fixation to Promote Natural Bone Healing

[Structural design and evaluation of bone remodeling effect of fracture internal fixation implants with time-varying stiffness]

Metal additive manufacturing of orthopedic bone plates: An overview

Mechanical analysis of the bone to plate interface of the LC-DCP and of the PC-FIX on human femora

Finite element analysis of a novel anatomical plate in posterolateral plateau fractures