Abstract:For future pollution-free renewable energy production, platinum group metal (PGM)-free electrocatalysts are highly required for oxygen reduction reaction (ORR) to avoid all possible Fenton reactions and to make fuel cell more economical. Therefore, in this study, to overcome traditional electrocatalyst limitations, we applied facile method to synthesize robust mesoporous CrN-reduced graphene oxide (rGO) nanocomposite with MnO (thereafter, Cr/rGO composite with MnO) as an electrocatalyst by efficient one-step sol-gel method by ammonolysis at 900°C for 9 h. Synthesized porous structures of Cr/rGO nanocomposite with MnO have the highest estimated surface area of 379 m2·g−1, higher than that of the carbon black (216 m2·<math>gcat-1</math>) support, and almost uniform pore size distribution of about 4 nm. The Cr/rGO nanocomposites with MnO exhibit enhanced electrocatalytic ORR properties with estimated high half-wave potential of 0.89 V vs. the reversible hydrogen electrode (RHE) and current density of 5.90 mA·cm−2, compared with that of benchmark 20% Pt/C electrode (0.84 V, 5.50 mA·cm−2), with noticeable methanol tolerance and significantly enhanced stability in alkaline media. Hence, the Cr/rGO nanocomposites with MnO showed superior performance to 20 wt.% Pt/C; their half-wave potentials were 50 mV high, and the limiting current density was 0.40 mA·cm−2 high. In alkaline anion exchange membrane fuel cell (AAEMFC) setup, this cell delivers a power density of 309 mW·cm−2 for Cr/rGO nanocomposite with MnO, demonstrating its potential use for energy conversion applications. The nanosized Cr/rGO metallic crystalline nanocomposites with MnO gave a large active surface area owing to the presence of rGO, which also has an effect on the charge distribution and electronic states. Hence, it may be the reason that Cr/rGO nanocomposites with MnO, acting as more active and more stable catalytic materials, boosted the electrocatalytic properties. The synergistic consequence in nanosized Cr/rGO composite with MnO imparts the materials' high electron mobility and thus robust ORR activity in 0.1 M of KOH solution. This potential method is highly efficient for synthesis of large-scale, non-noble-metal-based electrocatalytic (NNME) materials (i.e., Cr/rGO nanocomposite with MnO) on the gram level and is efficient in preparing novel, low-cost, and more stable non-PGM catalysts for fuel cells.

Enhancing oxygen reduction reaction performance via CNTs/graphene supported iron protoporphyrin IX: A hybrid nanoarchitecture electrocatalyst

The Effect of CNTs on Performance Improvement of Rgo Supported Fe-Nx/C Electrocatalysts for the Oxygen Reduction Reaction

Three-dimensional porous supramolecular architecture from ultrathin g-C3N4 nanosheets and reduced graphene oxide: Solution self-assembly construction and application as a highly efficient metal-free electrocatalyst for oxygen reduction reaction

CoNx/NiFeOx/nitrogen-doping reduced graphene oxide nanocomposite derived from layered double hydroxide precursor as an efficient bifunctional electrocatalyst for oxygen electrocatalytic reactions

A High-Performance Electrocatalyst For Oxygen Reduction Based On Reduced Graphene Oxide Modified With Oxide Nanoparticles, Nitrogen Dopants, And Possible Metal-N-C Sites

Designing Bifunctional Oxygen Electrocatalysts Using Prussian Blue Analogue and Carbon Nanostructure Hybrids: Understanding the Role of Individual Components for Oxygen Reduction and Evolution Reactions

Highly Active Carbon/α‐MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

Highly Active Carbon/alpha-MnO2 Hybrid Oxygen Reduction Reaction Electrocatalysts

Highly Efficient Oxygen Reduction Catalysts by Rational Synthesis of Nanoconfined Maghemite in A Nitrogen-Doped Graphene Framework

Dual single-atom sites coupled with graphene-encapsulated core–shell Fe–Cu nanoalloy for boosting the oxygen reduction reaction

Novel Two-Dimensional Carbon–Chromium Nitride-Based Composite as an Electrocatalyst for Oxygen Reduction Reaction

Engineering of hollow mesoporous Fe-graphitic carbon Nitride@CNTs for superior electrocatalytic oxygen reduction reaction

Molecular Architectures of Iron Complexes for Oxygen Reduction Catalysis-Activity Enhancement by Hydroxide Ions Coupling.

A copper complex covalently grafted on carbon nanotubes and reduced graphene oxide promotes oxygen reduction reaction activity and catalyst stability

Etching Approach to Hybrid Structures of PtPd Nanocages and Graphene for Efficient Oxygen Reduction Reaction Catalysts

Reduced graphene oxide-carbon black composite supported iron phthalocyanine as a high-efficiency and stable catalyst for oxygen reduction reaction

Carbon-nitrogen/graphene Composite As Metal-Free Electrocatalyst for the Oxygen Reduction Reaction

A novel 3D hybrid carbon-based conductive network constructed by bimetallic MOF-derived CNTs embedded nitrogen-doped carbon framework for oxygen reduction reaction

Superior Oxygen Reduction Electrocatalysis Enabled by Integrating Hierarchical Pores, Fe3C Nanoparticles and Bamboo-Like Carbon Nanotubes

Carbon Nanotubes Loaded on Graphene Microfolds As Efficient Bifunctional Electrocatalysts for the Oxygen Reduction and Oxygen Evolution Reactions

Molecule-confined modification of graphitic C3N4 to design mesopore-dominated Fe-N-C hybrid electrocatalyst for oxygen reduction reaction