Abstract:Ammonia has been proposed as a replacement for fossil fuels. Like hydrogen, emissions from the combustion of ammonia are carbon-free. Unlike hydrogen, ammonia is more energy dense, less explosive, and there exists extensive experience in its distribution. However, ammonia has a low flame speed and combustion emits nitrogen oxides. Ammonia is produced via the Haber-Bosch process which consumes large amounts of fossil fuels and requires high temperatures and pressures. A life cycle assessment to determine potential environmental advantages and disadvantages of using ammonia is necessary. In this work, emissions data from experiments with generating heat from tangential swirl burners using ammonia cofired with methane employing currently available technologies were utilized to estimate the environmental impacts that may be expected. Seven ammonia sources were combined with two methane sources to create 14 scenarios. The impacts from these 14 scenarios were compared to those expected from using pure methane. The results show that using ammonia from present-day commercial production methods will result in worse global warming potentials than using methane to generate the same amount of heat. Only two scenarios, methane from biogas combined with ammonia from hydrogen from electricity and nuclear power via electrolysis and subsequent ammonia synthesis using nitrogen from the air, showed reductions in global warming potential. Subsequent analysis of other environmental impacts for these two scenarios showed potentially lower impacts for respiratory organics, terrestrial acidification-nutrification and aquatic acidification depending on how the burner is operated. The other eight environmental impacts were worse than the methane scenario because of activities intrinsic to the generation of electricity via wind power and nuclear fission. The results show that generating heat from a tangential swirl burner using ammonia currently available technologies will not necessarily result in improved environmental benefits in all categories. Improvements in renewable energy technologies could change these results positively. Other means of producing ammonia and improved means of converting ammonia to energy must continue to be explored.

Performance assessment of ammonia as a turbofan engine fuel during various altitude levels

A Comparative Environmental Life Cycle Assessment of the Combustion of Ammonia/Methane Fuels in a Tangential Swirl Burner

Assessment of Thermodynamic Performance and CO2 Emission Reduction for a Supersonic Precooled Turbine Engine Cycle Fueled with a New Green Fuel of Ammonia

Performance and Emission Characteristics of Ammonia Fueled Scramjet Engine

Assessment of thermodynamic performance and CO 2 emission reduction for a supersonic precooled turbine engine cycle fueled with a new green fuel of ammonia

Ammonia for civil aviation: A design and performance study for aircraft and turbofan engine

Transient Modeling of an Aero-Engine Using Ammonia As a Fuel Carrier

Energy and Exergy Assessments of a Diesel-, Biodiesel-, and Ammonia-Fueled Compression Ignition Engine

Thermodynamic-based environmental and enviroeconomic assessments of a turboprop engine used for freight aircrafts under different flight phases

Performance assessment for a novel supersonic turbine engine with variable geometry and fuel precooled: From feasibility, exergy, thermoeconomic perspectives

Exploring the GHG reduction potential of pilot diesel-ignited ammonia engines - Effects of diesel injection timing and ammonia energetic ratio

The effects of ammonia addition on the emission and performance characteristics of a diesel engine with variable compression ratio and injection timing

Carbon neutrality with ammonia: An analysis of its feasibility as a fuel for diesel engines fuelled with spirulina microalgae and oxygenated additives

Energy, exergy, thermoecologic, environmental, enviroeconomic and sustainability analyses and assessments of the aircraft engine fueled with biofuel and jet fuel

Numerical analysis for optimizing combustion strategy in an ammonia-diesel dual-fuel engine

Energy-Exergy Analysis and Optimal Design of a Hydrogen Turbofan Engine

Comprehensive Technical Analyses of a Solid Oxide Fuel Cell Turbine-Less Hybrid Aircraft Propulsion System Using Ammonia and Methane As Alternative Fuels

Nitro-compounds and GHG exhaust emissions of a pilot diesel-ignited ammonia dual-fuel engine under various operating conditions

Multi-Objective Optimization and Chemical Reactor Network Modelling to Estimate the Minimum NOx and Ammonia Slip in an Aviation Combustor

Exergy analysis of a turboprop engine at different flight altitude and speeds using novel consideration

Effects of using ammonia as a primary fuel on engine performance and emissions in an ammonia/biodiesel dual‐fuel CI engine