Abstract:Synthetic jets, known as zero-net mass-flux (ZNMF) devices, have been widely used for cooling electronics. A synthetic jet is generally composed of a cavity with an orifice on one side and an oscillating diagram on the other side. The vibration of the diaphragm will generate a periodically impinging flow through the orifice which is found to be effective in enhancing heat transfer. The thermal performance of the synthetic jet is highly dependent on the peak velocity of the synthetic jet is able to generate. The orifice shape, orifice thickness, and the number of the orifices are the factors which affect the vibration condition of the diaphragm and thus to affect the performance of the synthetic jet. This study will use both experimental and computational methods to find out the optimal design of synthetic jet and how these factors affect synthetic jet performance. The synthetic jet arrays are driven by a piezoelectric stack actuator which is vibrating at around 720 Hz and the mean-to-peak amplitude is around 0.2 mm. The jet diaphragm (120 mm × 15 mm) is designed using a composite structure composed of a carbon fiber beam, a carbon fiber frame, and a jet frame fabricated by polymethyl methacrylate (PMMA). Four different orifice shapes (square, single slot, double slot, and triangle) with the same area have been designed and the square orifice has the highest velocity. The effect of the orifice thickness is also studied by testing four kinds of PMMA films with different thicknesses (1.5 mm, 2 mm, 3 mm, and 4.5 mm) and the case with 4.5 mm thick orifice has the best performance. The numerical simulation is conducted using the CFD software ANSYS Fluent to support the experimental results. The vibrating of the diaphragm is defined as a moving wall using a user defined function. The fluid power consumed by the diaphragm is used to determine the performances of different designs. The same trend with orifice thickness has been found and the reason has been demonstrated.

Design of a Dual-Chamber Piezoelectric-Driven Micro Blower: Example of Heat Dissipation Use

Local Heat Transfer Enhancement Induced by a Piezoelectric Fan in a Channel with Axial Flow

Thermal and fluid aspects of dual piezoelectric jet pump of double chambers

Piezoelectric Micropump Cooler for High-Power Electronic Cooling

PMMA Application in Piezo Actuation Jet for Dissipating Heat of Electronic Devices

A Compact Jet Array Impingement Cooling System Driven by Integrated Piezoelectric Micropump

Blade Heat Dissipator with Room-Temperature Liquid Metal Running Inside A Sheet of Hollow Chamber

Evaluating dynamic, fluid flow and performance parameters of piezoelectric based micro-blower: a two-dimensional axisymmetric numerical approach

Piezoelectric Synthetic Jet Integrated with Heat Sink for Heat Transfer Enhancement

Active Heat Sink with Piezoelectric Translational Agitators, Piezoelectric Synthetic Jets, and Micro Pin Fin Arrays

A Heat Exchanger Based on the Piezoelectric Pump for CPU Cooling

Thermal Analysis on Active Heat Dissipation Design with Embedded Flow Channels for Flexible Electronic Devices

Investigation of a hybrid two-layered channel-jet heat sink for air cooling

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics

Design of a Self-Driven Liquid Metal Cooling Device for Heat Dissipation of Hot Chips in a Closed Cabinet

Enhancing Boiling Heat Transfer by High-Frequency Pulsating Jet with Piezoelectric Micropump

A High Flow Rate Piezoelectric Micropump for Miniature Liquid Cooling System

A mechanical micropump for electronic cooling

Numerical simulation of flow and heat transfer induced by periodic motion of dual piezoelectric fans in confined volume

Numerical Analysis of Microchannels Designed for Heat Sinks

A miniature atomization-air-cooled heat sink for electronic chips