Abstract:Low-rise cold-formed steel (CFS) structures have been used extensively in the low to moderate seismicity zones in many parts of the world. Quite several studies have been conducted focusing on their seismic or wind performance, respectively, neglecting their sensitivity to multi-hazard loading conditions, such as combined strong winds and earthquakes, et al. There is a possibility that strong winds and earthquakes will occur simultaneously based on previous and this paper's studies. However, there is no systematic method for assessing the performance of engineering structures subjected to multi-hazard effects. To fill the above research gaps, this article, drawing upon the research findings of meteorologists and geologists, explicates the mechanisms responsible for the simultaneous occurrence of earthquakes and strong winds. Employing statistical analysis techniques, it explores the probability of concurrent incidents of strong winds and earthquakes through the examination of extensive meteorological and seismic historical data from diverse representative regions. Based on this foundation, establishes a multi-hazard performance assessment method applicable to various structures and hazards and takes two common low-rise CFS structures with and without diagonal struts as the research objects, analyses the dynamic response of both under the combined effects of earthquake and wind loads and completes the performance assessment of CFS structures subject to typical multi-hazard effects. The results are as follows: 1 In various geographical regions, there are instances of strong winds and earthquakes occurring simultaneously. These two distinct forms of disasters exhibit a measurable probability of simultaneous incidence, with this likelihood being notably elevated in particular geographical zones; 2 The multi-hazard performance assessment method proposed herein can effectively take into account the uncertainty of structures and loads, and has good generalizability; 3 For the CFS structures, the effect of earthquake is more significant than that of wind, but with the addition of wind load, the overall dynamic response of the structures is significantly enhanced and the damage probability is significantly increased, and the combined effect of earthquake and wind cannot be ignored; 4 The continuous wind load effect will cause the CFS structures to acquire a greater dynamic response at the end of the earthquake, in other words, a significant increase in the post-earthquake wind effect compared to the pre-earthquake wind; 5 The existence of diagonal struts inside the CFS panels can effectively reduce the dynamic response and damage probability generated by the combined effects of earthquake and wind. The study results can raise researchers' attention to the combined effects of earthquakes and winds and provide a reference for future design methods for multi-hazard resistance of CFS structures.

The Effect of Wind Loads on the Seismic Performance of Tall Buildings

Directional alongwind and crosswind effects on the performance of a 15-storey steel braced frame building in seismic environment

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Effects of plan dimensions on gust wind loads for high-rise buildings

Evaluation of horizontal loads in the concept design of tall building concrete structures

Evaluation of wind-induced effect on seismically isolated super high-rise building based on integrated seismic isolation design method: A case study

Effects of Geometric Nonlinearity and Aerodynamic Damping on the Dynamic Structural Response of Tall Buildings: A Case Study

Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading

Optimization & Design of High Rise Building with Different Structural Framing Systems Subjected To Seismic Loads

Wind-Induced Responses and Wind Loads on a Super High-Rise Building with Various Cross-Sections and High Side Ratio—A Case Study

Performance Evaluation of High-Rise Buildings Using Database-Assisted Design Approach

Evaluation of wind-induced fragility and cumulative fatigue damage on seismically isolated high-rise building

Vertical Geometric Irregularity Effect on Performance-Based Seismic Design for Moderate Rise RC Moment Resisting Frame Buildings

Analysis of the dynamic structural behavior of tall buildings subjected to the transversal action of the wind: considering their interaction with the ground

SEISMIC COLLAPSE RESISTANCE EVALUATION OF ONE SUPER-TALL BUILDING WITH DIFFERENT LATERAL FORCE RESISTING SYSTEMS

Nonlinear analysis of reinforced concrete buildings with different heights and floor systems

Seismic Performance Evaluation of Posttensioned Hybrid Precast Wall-Frame Buildings and Comparison with Shear Wall-Frame Buildings

Multi-hazard performance assessment of low-rise cold-formed steel structures subjected to combined earthquake and wind

Investigation of the Effect of the Wind Speed on the Aerodynamic and Architectural Design of Tall Buildings

Effect of nonlinearity on seismic response of nonstructural components in a code-conforming RC shear wall building

Comparative assessment of nonlinear static and dynamic methods for analysing building response under sequential earthquake and tsunami