Abstract:High-energy irradiation significantly increases the optical losses and noise coefficients of laser materials, leading to a substantial decrease in the slope efficiency or gain performance of laser output. To address this issue, we propose a strategy to enhance the radiation resistance of glasses/fibers by introducing phase interfaces. Based on the sol–gel method, through phase-separation techniques and high-temperature annealing treatments, silica-rich and phosphorus-rich phases were formed in erbium-ytterbium co-doped high-phosphorus silica glass, and nanoscale phase interfaces with specific densities, stability levels, and homogeneous distributions of doped elements were constructed between the phases. Using high-resolution transmission electron microscopy, nuclear magnetic resonance, and spectroscopic analyses, we tracked the evolution of the internal microstructure of the glasses at the atomic level. The findings confirmed that annealing effectively controlled the density of the phase interfaces formed. Under 1 kGy X-ray irradiation, glasses with effective phase interfaces exhibited significant reduction in radiation-induced attenuation (RIA) and improvement in photoluminescence intensity compared to pristine glasses. This indicated that effective phase interfaces could act as complex centers for irradiation-induced point defects, absorbing radiant energy and trapping these defects, thus mitigating high-energy radiation-induced damages. Furthermore, online irradiation tests on the Er 3+ /Yb 3+ co-doped silica fibers supported this result. Compared to pristine fiber, fibers annealed for 3 h and annealed for 20 h with different phase interfacial densities showed 45% and 73% lower RIA at 1080 nm, respectively.

Core Versus Cladding Effects of Proton Irradiation on Erbium-Doped Optical Fiber: Micro-Luminescence Study

Radiation Effects on Ytterbium- and Ytterbium/Erbium-Doped Double-Clad Optical Fibers

Irradiation-induced Effect Measurement in Double-clad Large Core Pure Quartz Fiber on 60 Co Source

Experimental Investigation of Neutron Irradiation Effect on Silica-Based Erbium-Doped Fiber Amplifier

Ionizing Radiation Effect upon Er/Yb Co-Doped Fibre Made by In-Situ Nano Solution Doping

Effects of Electron Irradiation on Optical Properties of Bismuth-Doped Phosphosilicate Fiber

Experimental Investigation of Gamma Ray Radiation Effects on 1550nm Single Mode Fiber

Influence of Pre-Radiation and Photo-Bleaching on the Yb-Doped Fiber Laser Radiated with Gamma-ray

Investigation of the Irradiation Effect on Erbium-Doped Fiber Amplifiers Composed by Different Density Erbium-Doped Fibers

Photoluminescence enhancement from the defects state formed by neutron/gamma mixed irradiation in an epoxy resin for LED applications

Enhanced radiation resistance of Er3+/Yb3+ co-doped high-phosphorus silica glasses and fibers via phase-interface engineering

Comparative Investigation of Gamma Radiation Effects on Long Period Gratings and Optical Power in Different Optical Fibers

Neutron versus Gamma Radiation Effects on Ytterbium-doped Optical Fibers

Radiation Effects On Optical And Structural Properties Of Gg17 Glasses Induced By 170 Kev Electrons And Protons

Gamma Radiation-Induced Effects over an Optical Fiber Laser: Towards New Sensing Applications

Experimental Study of the Temperature and Electron-Irradiation Effect on Erbium-Doped Fiber Amplifiers

Influence of Hydrogen on the Radiation-Induced Attenuation of Ge-doped Optical Fibers

Optical spectra in pure-silica-core single mode optical fibers after high-fluence reactor irradiation

Temperature Influence on the Radiation Responses of Erbium‐Doped Fiber Amplifiers

LD End-Pumped Er,Pr:GYSGG Single Crystal Fiber Laser As a Potential Mid-Infrared Seed Source Applied in Radiation Environment

Optical transitions in Er3+ doped lead germanate glasses