Abstract:The sedimentary structure is important for the engineering design, operation, and safety evaluation of tailing dams. For upstream-method tailing dams, tailing slurry flows and deposits in the pond and forms a complex dam structure. Ore drawing parameters (e.g., slurry concentration and flow rate) have significant influence on the sedimentary structure of tailing dams. However, there is a lack of unified and quantitative understanding of the complicated effects of ore drawing parameters on the deposition behaviour of tailings. In the present study, flume tests were applied to investigate the characteristics of the sedimentary structure of tailing dams. Seven ore drawing experiments were conducted to simulate different slurry concentrations and flow rates. The distribution of characteristic particle sizes d 50 and d 10 of sediment was obtained. Furthermore, considering two dominant features of particle size distribution, a mathematical model for the equation between characteristic particle size and deposition distance was established. The exponential part of this equation describes the decreasing trend of the characteristic particle size, and a smooth step function is introduced to characterize the abrupt decrease in particle size. The experimental data of d 50 and d 10 in all these test cases can be approximated by the equation with correlation coefficients R 2 greater than 0.861. As the slurry concentration of ore drawing increases, the hydraulic sorting gradually weakens. The characteristic particle size distribution curves corresponding to a larger flow rate are generally located above those corresponding to a small flow rate, indicating that the larger the flow rate is, the coarser the sediment. This study provided useful information for the determination of ore drawing parameters in actual tailing dams. The mathematical model of tailings’ particle size distribution can be further used for refined modelling of tailing dams, so as to analyse the safety and stability of the dams.

Development of a full-scale flume test system for depositional behavior study of segregating tailings

Application and Design of an Efficient Siphon Dewatering System for Debris Flow Mitigation: A Case Study of a Small Catchment in Zhejiang Province, China

One-Dimensional Model For Sedimentation And Consolidation Of Tailings Slurry

Numerical Investigation on the Adaptation of Dam-Break Flow-Induced Bed Load Transport to the Capacity Regime over a Sloping Bed

Sediment Sluicing Management and Analysis of Reservior Deposition for Fengjiashan Reservior

Analysis and Inspection on Siltation of Intercepting Combined Sewer System

TEST OF EMPIRICAL SEDIMENT TRANSPORT RELATIONS AGAINST EXPERIMENTAL SWASH DATA UNDER THE NON-CAPACITY MODELING FRAMEWORK

Experimental Study on the Hydraulic Characteristics of Tailings Dams Through Large-Scale Particle Velocimetry

Experimental Characterization of the Influence of Ore Drawing Parameters on Tailing Deposition

Mechanical Characteristics of Tailings in Different Depositional Zones: A Case Study of Caijiagou Tailings Pond in Shaanxi, China

Experimental Study on Tailings Deposition Distribution Pattern and Sedimentation Characteristics

Experimental study of the influence of gradation on the dynamic properties of centerline tailings sand

Iron Tailings Gravitational Settling Law and Implementation

Experimental study on the liquefaction characteristics of tailing sand under earthquake action and establishment of flow model

The study of the separation and deposition of dredging soil slurry under physical disturbance

Experiment research and mechanism analysis on rheological properties of tailings slurry

Shear wave velocity and geotechnical properties of tailings deposits

Study On Failure Process Of Tailing Dams Based On Particle Flow Theories

Numerical simulation of three-dimensional seepage field in a tailing pond under multiple operating conditions

Sedimentation of the fine-grained dredged slurry in the marine environment

Modeling the Deposition System Evolution of Accreting Tidal Flats: A Case Study from the Coastal Plain of Central Jiangsu, China