Abstract:Developing metal‐free heterogeneous catalysts with high efficiency for the elimination of H2S into eco‐friendly products are very important for both fundamental catalytic science and industrial chemistry. Herein, we design a new modified carbon nitride catalyst engrafted with Br‐substituted aromatic heterocycle (CNU‐Br) through a simple copolymerization and exfoliation method. CNU‐Br exhibits excellent H2S conversion efficiency, high sulfur selectivity, and outstanding stability in the catalytic desulfurization reaction, which is better than most of the reported catalysts. The experiments and theoretical calculations show that the grafting of bromophenyl groups into the fundamental carbon nitride structural network leads to π‐delocalization, surface modification, as well as enhances the basicity of the structural active N sites. The regulation of the H and S affinity of CNU‐Br that mediate the facile cleavage of H2S hydrogen‐sulfur bonds and the release of S atoms in thermodynamics. Furthermore, the superior surface area and mass transfer over CNU‐Br accelerate the adsorption and oxidation of H2S in kinetics compared with the ordinary carbon nitride.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to develop an efficient metal - free heterogeneous catalyst for converting hydrogen sulfide (\( \text{H}_2\text{S} \)) into environmentally friendly products. Specifically, the researchers designed a bromine - substituted aromatic heterocyclic - modified carbon nitride catalyst (CNU - Br) prepared by a simple copolymerization and exfoliation method. This catalyst exhibits excellent \( \text{H}_2\text{S} \) conversion efficiency, high sulfur selectivity and outstanding stability in the catalytic desulfurization reaction, outperforming most of the reported catalysts. ### Main Problems and Background 1. **Background Problems**: - Hydrogen sulfide (\( \text{H}_2\text{S} \)) is a common by - product in the petroleum and natural gas industries, and strict regulations require the treatment of sulfur - containing gases. - Selective catalytic oxidation of \( \text{H}_2\text{S} \) (\( \text{H}_2\text{S}+\frac{1}{2}\text{O}_2\rightarrow\frac{1}{n}\text{S}_n + \text{H}_2\text{O} \)) is a technology that can eliminate \( \text{H}_2\text{S} \) and recover sulfur as a useful resource. - Although traditional metal oxide catalysts (such as \( \text{Fe}_2\text{O}_3 \) and \( \text{Al}_2\text{O}_3 \)) are low - cost and have certain catalytic properties, they still cannot meet the requirements simultaneously in terms of selectivity, conversion rate and stability. 2. **Research Objectives**: - Develop an efficient metal - free catalyst for the selective catalytic oxidation of \( \text{H}_2\text{S} \). - Improve the activity and stability of the catalyst by introducing bromine - substituted aromatic heterocycles to adjust the electronic structure and surface properties of the carbon nitride. ### Solutions 1. **Catalyst Design**: - By copolymerizing urea (\( \text{CH}_4\text{N}_2\text{O} \)) with tetrabromobisphenol A (TBBPA, \( \text{C}_{15}\text{H}_{12}\text{Br}_4\text{O}_2 \)), aromatic rings and bromine atoms are directly introduced into the carbon nitride network. - A series of catalyst samples (CNU - Brx, x = 15, 25, 50, 75) with different amounts of TBBPA added were prepared. 2. **Performance Evaluation**: - The structure and surface properties of the catalyst were characterized by means of X - ray diffraction (XRD), infrared spectroscopy (IR), Raman spectroscopy (Raman), solid - state nuclear magnetic resonance (13C NMR), X - ray photoelectron spectroscopy (XPS), etc. - The \( \text{H}_2\text{S} \) conversion rate, sulfur selectivity and stability of the catalyst at different temperatures were tested in a fixed - bed reactor. ### Main Findings 1. **Structural Characteristics**: - The XRD patterns of the CNU - Brx samples show that as the amount of TBBPA added increases, the (002) peak shifts to a lower angle, indicating an increase in the interlayer spacing. - The results of solid - state 13C NMR and XPS confirm the successful introduction of aromatic rings and bromine atoms. 2. **Catalytic Performance**: - The CNU - Brx samples are significantly superior to the unmodified CNU in terms of \( \text{H}_2\text{S} \) conversion rate and sulfur selectivity. - At a reaction temperature above 180°C, the \( \text{H}_2\text{S} \) conversion rate of CNU - Br0.075 is close to 100%, and the sulfur selectivity is close to 100%. - CNU - Br75 exhibits excellent stability and a high sulfur yield at 180°C for more than 200 hours. ### Conclusion By introducing bromine - substituted aromatic heterocycles, the researchers successfully prepared an efficient and stable metal - free carbon nitride catalyst.

Electronic Regulation of Bromophenyl Grafted Metal‐Free Carbon Nitride Catalysts for Enhanced Utilization of H 2 S

Electronic Regulation of Bromophenyl Grafted Metal‐Free Carbon Nitride Catalysts for Enhanced Utilization of H2S

Regulation of the Selective Hydrogenation Performance of Sulfur-Doped Carbon-Supported Palladium on Chloronitrobenzene

Carbon-Rich carbon nitride nanocatalysts for H2S selective oxidation

In Situ S-Doping Engineering for Highly Efficient NH3-SCR over Metal-Free Carbon Catalysts: A Novel Synergetic Promotional Mechanism

Carbon-doped boron nitride nanosheets as an efficient metal-free catalyst for the selective oxidation of H2S

Efficiently Selective Oxidation of H 2 S to Elemental Sulfur over Covalent Triazine Framework Catalysts

Enhanced Electron Delocalization Induced by Ferromagnetic Sulfur doped C 3 N 4 Triggers Selective H 2 O 2 Production

Rational designed Co@N-doped carbon catalyst for high-efficient H2S selective oxidation by regulating electronic structures

Reusable salt-template strategy for synthesis of porous nitrogen-rich carbon boosts H2S selective oxidation

Selective catalytic oxidation of pollutant H2S over Co-decorated hollow N-doped carbon nanofibers for high-performance Li-S batteries

Platinum Clusters Anchored on Sulfur-Doped Ordered Mesoporous Carbon for Chemoselective Hydrogenation of Halogenated Nitroarenes.

The Importance of Sintering‐Induced Grain Boundaries in Copper Catalysis to Improve Carbon‐Carbon Coupling

Structural Lithium Incorporated with the Crystalline Poly(Triazine Imide) Frameworks for Selective Catalytic Oxidative Desulfurization

Polyethyleneimine-functionalized mesoporous carbon nanosheets as metal-free catalysts for the selective oxidation of H2S at room temperature

Molecular‐level Modulation of N, S‐co‐doped Mesoporous Carbon Nanospheres for Selective Aqueous Catalytic Oxidation of Ethylbenzene

Decoration of Pd Nanoparticles with N and S Doped Carbon Quantum Dots as a Robust Catalyst for the Chemoselective Hydrogenation Reaction

Synthesis of nitrogen and sulfur Co-doped carbon with special hollow sphere structure for enhanced catalytic oxidation

Towards Highly Exposed Active Sites Via Edge-N-rich Carbon Nanosheet @ Porous Biochar for Efficient H2S Catalytic Oxidation

Towards highly exposed active sites via Edge-N-rich carbon nanosheet @ porous biochar for efficient H 2 S catalytic oxidation

Strengthened Delocalized Electronic Effect in Nano-Nickel@Carbon with High Pyrrolic Nitrogen for Selective Hydrogenation of Substituted Nitrobenzene Hydrogenation