Silver Bullet Talks with Nicole Perlroth

G. McGraw

DOI: https://doi.org/10.1109/MSP.2017.4251119

2017-11-01

Abstract:Gary McGraw talks to Nicole Perlroth, who covers cybersecurity for the New York Times and the Bits Blog.

What problem does this paper attempt to address?

Boosting Electrochemical Ammonia Synthesis via NOx Reduction over Sulfur‐Doped Copper Oxide Nanoneedle Arrays

Taisong Zhang,Jiangnan Lv,Ruixia Yang,Zhi Yan,Xiaoting Sun,Xiaohong Xu,Yang Liu

DOI: https://doi.org/10.1002/aenm.202400790

IF: 27.8

2024-05-15

Advanced Energy Materials

Abstract:Electrocatalytic nitrate and nitrite reduction reaction to ammonia (NH3) is of great significance in environmental issues and industry feedstocks. Sulfur‐doped Cu2O shows the potential to efficiently convert NO3− and NO2− to NH3 with high selectivity and stability. Combining the electrochemical performances, in situ spectroscopic characterizations, and theoretical calculations, it is revealed that sulfur dopant can promote the NO3− adsorption and the NO2− to NH3 steps. The electrochemical NOx reduction reactions, involving nitrate and nitrite reduction reactions (NO3−RR and NO2−RR), have emerged as promising approaches for both NO3− and NO2− removal, and ammonium (NH3) synthesis under ambient conditions. However, the incorporation and stabilization of sulfur dopants in the catalysts for efficient NOx reduction are rarely explored, leading to an unclear effect of sulfur on the NOx reduction mechanism. Herein, sulfur‐doped Cu2O (S‐Cu2O) nanoneedle arrays via in situ electrochemical treatment are synthesized. The S‐Cu2O catalyst possesses excellent durability and selectivity for NH3 over a wide range of potentials in NO3−RR, attaining a maximum NH3 Faradaic efficiency of 94% at −0.6 VRHE and a maximum NH3 yield as high as 1.06 mmol h−1 cm−2. In NO3−RR, the sulfur dopant can accelerate the step from NO2− to NH3, contributing superior performance in NO2−RR and assembled Zn−NO2− battery device. Density functional theory (DFT) calculations reveal that the presence of sulfur can enhance the initial step of *NO3 adsorption, lower the reaction barriers for the formation of *NHO intermediate, and activate the H2O dissociation process. The work sheds light on the role of sulfur in enhancing electrocatalytic performance and provides a unique perspective for understanding the NOx reduction mechanism.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Enhanced nitrogen electroreduction to ammonia activities on Sb 2 S 3 electrocatalyst by sulfur defects coupled with carbon doping

Xiaoting Zhang,Yang Ni,Xiuling Sun,Yiwei Jiang,Xinru Wang,Yu Qi,Jialong Huang,Fengshou Yu,Xueli Li,Yantu Zhang,Yu Qiu

DOI: https://doi.org/10.1016/j.ces.2024.120501

IF: 4.7

2024-07-14

Chemical Engineering Science

Abstract:Exploiting effective, robust while cheap catalysts for the nitrogen reduction reaction (NRR) is of great significance in the scalability and renewability of electrochemical NH 3 synthesis. Herein, a synergetic strategy of C dopants and S vacancies was employed into Sb 2 S 3 (marked as C-Sb 2 S 3-x ) to boost the electrochemical NRR performance. The induced effects of C dopants and S vacancies of Sb 2 S 3 on the physical and electrochemical behaviors were throughly investigated. Experiments verify that, the content of low oxidation state in Sb species are remarkably enhanced after introducing C dopants and S vacancies, this facilitate the enhanced electric conductivity and NRR activities of C-Sb 2 S 3-x , together with the encouraged reaction kinetics. The prepared C-Sb 2 S 3-x delivered an optimized NH 3 yield rate of 47.2 μg h −1 mg −1 cat. at −0.6 V along with a high Faradaic efficiency value of 6.4 % at −0.5 V in acid, outperforming than those of Sb 2 S 3 and most disclosed sulfid NRR electrocatalysts. Density functional theory calculations validate that, cooperation of C doping and S vacancy could achieve the elevated NH 3 yield rate, Faradaic efficiency as well as competitive stability. This approach puts forward an effective strategy for transition metal compounds to be more suitable for efficient electrocatalysis.

engineering, chemical
Promotion effect of nitrogen doping on the low-temperature NH 3 -SCR of NO over activated carbon: Characterization and mechanism analysis

Lu Yao,Yujie Lu,Hongyan Pan,Guotao Xiang,Xianju Zhou,Weizao Liu,Qingcai Liu,Ming Kong,Jun Cao

DOI: https://doi.org/10.1016/j.jece.2024.114381

IF: 7.7

2024-10-15

Journal of Environmental Chemical Engineering

Abstract:Heteroatom nitrogen doping in carbon catalysts is recognized an effective strategy for tailoring the properties of carbon catalysts for various flue gas de-NO x applications. However, accurately discerning the active structures after nitrogen doping and elucidating the promotion effect on low-temperature selective catalytic reduction activity remains a formidable challenge under different nitrogen doping preparation conditions. In this study, a series of nitrogen-doped activated carbon catalysts was synthesized through the L16(4 5 ) orthogonal array design method, and the degree of influence of various preparation conditions on de-NO x catalytic activities was also assessed. The optimal preparation conditions determined by range analysis were employed to synthesize NOAC-17, achieving the NO conversion of 95 % and N 2 selectivity of 99 % at 300 °C, respectively. Subsequently, various characterization results proved that nitrogen doping induced the formation of abundant basic groups. The imine, amide, amine, and N-6 groups altered the acid-base of the activated carbon surface and increased the adsorption of acidic NO x . The N-5 and N-Q groups enhanced electronic interaction in the carbon matrix and accelerated electron mobility in the catalytic reaction process. Moreover, the N-6 group played multiple roles beyond the aforementioned effect due to its special structure. It also enhanced the accumulation of oxygen vacancies, which were closely associated with further oxidation of adsorbed NO. The lone electron pair in the N-6 group within the activated carbon framework can alter the polarity of the catalyst, thereby exerting a positive influence on the adsorption and activation of NH 3 . The nitrogen-doped catalyst identified through range analysis of the orthogonal experiment primarily facilitated the NH 3 -SCR reaction via the E-R mechanism with supplementary contribution from L-H mechanism at low temperatures. The nitrogen doping conditions obtained for the activated carbon catalyst provide valuable insights for the strategic enhancement of its catalytic performance in low-temperature NH 3 -SCR reactions.

engineering, chemical, environmental
Boosting Low-Temperature NH3-SCR Performance Via Mixed-Valence Cobalt Dual Active Sites

Xuan Zhang,Weibin Chen,Dequan Jiang,Shenghui Han,Wanli Yi,Jianwen Su,Qiaoxin Zhang,Mohan Jia,Song Gao,Yonggang Wang,Ruqiang Zou

DOI: https://doi.org/10.1016/j.surfin.2024.105229

IF: 6.2

2024-01-01

Surfaces and Interfaces

Abstract:Nitrogen oxides (NOx) have become a critical environmental concern, necessitating the development of highly efficient catalysts for temperature which is lower than 300 degrees C. Selective catalytic reduction with NH3 (NH3-SCR) is a process where ammonia is the reducing agent for selective catalytic reduction of nitrogen oxides in exhaust gases. The mechanism-property relationship between catalytic active sites and low-temperature denitrification efficiency, however, remains unclear. In this study, we synthesized a series of cobalt-modified nanoparticle catalysts using a scalable citric acid sol-gel method and conducted comprehensive characterizations. Our findings indicate that an optimal cobalt doping rate significantly enhances catalytic activity due to the synergistic effects of reduced nanoparticle size and the dual active sites of Co0/Co2+. Specifically, at a cobalt doping ratio of 1.0, the catalyst demonstrates peak SCR activity, achieving 85.5% NOx conversion at 120 degrees C and complete conversion at 150 degrees C. These cobalt-modified nanoparticle catalysts feature high deposition of doped Co ions on their surfaces, predominantly as metallic cobalt and CoOx nanoclusters. Compared to undoped samples, the cobalt-doped nanoparticle catalysts exhibit a greater specific surface area, increased acidity, enhanced chemisorbed oxygen, and improved redox properties, all contributing to superior denitrification efficacy. Additionally, Density Functional Theory (DFT) calculations provide assertive evidence into the reaction mechanism, showing that Co2+ sites effectively adsorb and activate NH3, while Co0 sites are crucial for NO adsorption and activation. The synergistic interaction between Co2+ and Co0 facilitates N-N coupling, enhancing overall reaction efficiency. These findings underscore the potential of cobalt-modified catalysts for practical industrial applications, offering robust performance over a wide temperature range and meeting stringent environmental regulations.
"Oxynitride trap" over N/S co-doped graphene-supported catalysts promoting low temperature NH3-SCR performance: Insight into the structure and mechanisms

Weijie Zheng,Xiang Zhang,Yuying Zheng,Yuanyuan Yue

DOI: https://doi.org/10.1016/j.jhazmat.2021.127187

2022-02-05

Abstract:A series of nitrogen and sulfur (N/S) co-doped graphene supported catalysts (Mn-Ce-SnOx/NSG) were synthesized using an in situ method for enhancing selective catalytic reduction of NOx with NH3 (NH3-SCR) performance. The changes in catalysts' structure, morphology, and active sites were systematically researched to explore the promoting effect of N/S co-doped on catalytic performance. The prepared Mn-Ce-SnOx/NSG-0.3 catalyst achieves an excellent SCR activity at a low temperature, which is comparable to previous graphene-based catalysts. The Ce3+/(Ce3+ + Ce4+), Mn4+/Mn3+, and Oα/(Oα + Oβ) ratios in the catalyst are improved by N/S co-doping, which closely related to excellent SCR activity. Meanwhile, the unpaired electrons on N/S functional groups are effective in promoting the adsorption and further oxidation of gaseous NO. The ability to adsorb NH3 has also been promoted result of numerous Lewis acid sites over Mn-Ce-SnOx/NSG-0.3. In-situ DRIFTS and reaction kinetic results suggest that the Eley-Rideal mechanism should be the most significant pathway in the temperature range of ≥ 200 °C, where coordinated NH3 has higher activity than ionic NH4+. The Langmuir-Hinshelwood (L-H) mechanism is the main route of the low-temperature (L-T) (< 200 °C) SCR reaction. Particularly, the L-T SCR activity improves because the N/S functional groups act as an additional "oxynitride trap" (based on the L-H mechanism).
A facile MnSO4 surface coated NiMnFeOx catalyst with enhanced SO2 resistance for SCR reaction: A dual-protection mechanism

Shuhao Li,Feng Wang,Derrick Ng,Qiqi Shi,Thomas J. Raeber,Simon James,Boxiong Shen,Zongli Xie

DOI: https://doi.org/10.1016/j.apcatb.2023.123441

2024-03-01

Abstract:The SO2 resistance under low-temperature conditions remains a pivotal challenge in the industrial application of NH3-SCR catalysts. This work develops a facile and effective strategy of constructing a surface MnSO4 coating layer on catalysts in combination with Ni doping, which significantly boosts the SO2 resistance and stability of the conventional MnFeOx catalyst. Advanced characterizations including Synchrotron XAS analysis coupled with density functional theory (DFT) calculations, were utilized to further elucidate the underlying mechanism. The findings corroborate that the remarkable SO2 resistance of the MnSO4 surface-coated NiMnFeOx catalyst originates from a dual-protection mechanism. The doping of Ni effectively restricts the diffusion of SO2 within the catalyst, thereby confining sulfation to the surface of the catalyst. Subsequently, the MnSO4 coating layer provides further protection to the surface of the catalyst, inhibiting SO2 adsorption and safeguarding the active metal from poisoning. Importantly, this facile strategy can be implemented without any alterations to the catalyst preparation process, making it applicable to existing commercial catalysts, thus having outstanding industrial application potential.

chemistry, physical,engineering, chemical, environmental
Modulating active sites: A-site doped ACu-CeO 2 catalyst for efficient CO-SCR of NO

Jun Liu,Yajun He,Ying Wang,Yuqiong Zhao,Guoqiang Li,Guojie Zhang

DOI: https://doi.org/10.1016/j.fuel.2023.130729

IF: 7.4

2023-12-26

Fuel

Abstract:Transition metal-based nanomaterials have gained significant attention as highly active and cost-effective catalysts for the selective catalytic reduction (SCR) of NO with CO. Using a simple wet impregnation method, the catalyst composition and active sites can be modulated. In this paper, we present a novel cerium-based co-solvent catalyst, A-site doped ACu-CeO 2 (A = Co, Fe, Mn), for CO-SCR of NO. The doping of A-site elements induces structural changes and enhances catalytic performance. Among the doped catalysts, CoCu-CeO 2 exhibits a wide temperature window for operation and high selectivity towards nitrogen, achieving 100% NO conversion at 200 °C. Furthermore, A-site modulation not only promotes electron/ion transfer within the catalyst but also enables uniform and dispersed distribution of the active metal species, particularly copper, in the CoCu-CeO 2 catalyst. This provides reaction centers for the selective reduction of NO by CO and enhances the adsorption capacity of the catalyst for NO. The ACu-CeO 2 catalyst demonstrates excellent CO-SCR catalytic performance and resistance to vapor. Characterization techniques such as XPS, Raman spectroscopy, and in situ DRIFTS elucidate the reaction mechanism of the ACu-CeO 2 cerium-based co-solvate in the CO-SCR reaction. This study furthers our understanding and improvement of catalyst design, while also providing an efficient and straightforward denitrification catalyst for controlling air pollutants.

energy & fuels,engineering, chemical
S-doped M-N-C catalysts for the oxygen reduction reaction: Synthetic strategies, characterization, and mechanism

Li-lai Liu,Min-xuan Ma,Hao Xu,Xue-ying Yang,Xiang-yu Lu,Peixia Yang,Hui Wang,Li-lai Liu,Min-xuan Ma,Hao Xu,Xue-ying Yang,Xiang-yu Lu,Peixia Yang,Hui Wang

DOI: https://doi.org/10.1016/j.jelechem.2022.116637

IF: 4.598

2022-09-01

Journal of Electroanalytical Chemistry

Abstract:Due to the strong electronegativity of the N atom, the adsorption energy of the transition metal –nitrogen active site for the ORR intermediate is too high to facilitate the subsequent elementary reactions. It is worth noting that introducing sulfur atoms in transition metal–nitrogen–carbon catalysts can optimize the charge distribution of nitrogen atoms around metal sites to improve the electronic structure and structural defects of the catalysis, so as to boost the adsorption and transfer of oxygen-containing intermediates. Meanwhile, sulfur-doping can also inhibit metal nanoparticle formation and promote hierarchical porous carbon formation. This review will afford the S-doped M-N-C catalysts rational design principle and strategies and introduce the corresponding ORR electrochemical properties. We will combine advanced characterization techniques and DFT calculation to discuss the coordination environment of active sites and the ORR mechanism of S-doped M-N-C catalysts. Finally, a general perspective on the challenges and opportunities for S-doped M-N-C catalysts will be proposed to facilitate further development.

chemistry, analytical,electrochemistry
Influence of Catalyst Structural Remodelling on The Performance of NH3 ‐SCR Reactions: A Mini Review

Jun Liu,Dengke Lv,Ying Wang,Yuqiong Zhao,Guoqiang Li,Guojie Zhang

DOI: https://doi.org/10.1002/cctc.202401076

IF: 4.5

2024-07-13

ChemCatChem

Abstract:With the continuous expansion of industrial activities worldwide, industrial emissions of nitrogen oxides (NOx) pose a serious threat to both ecosystems and human health. Ammonia selective catalytic reduction of NO (NH3‐SCR) technology has emerged as the most effective means to reduce NOx emissions, and the development of catalysts is crucial for the successful implementation of this technology. In gas‐solid multiphase catalytic systems, the performance limitations of conventional catalysts can be effectively overcome by meticulously designing the nanostructures of the catalysts to achieve improved catalytic efficiency. In this review, the unique structural features of core‐shell structures, layered double hydroxide (LDHs), hollow nano spheres and nanotubes, along with their preparation processes, are systematically examined, beginning with the effects of structural changes on catalytic performance. Based on this review, the impact of structural modifications on the catalytic efficiency of the catalysts for the NH3‐SCR reaction and their anti‐poisoning performance were investigated. Ultimately, the influence of catalyst structural changes on the future design of catalysts is anticipated. This provides a robust scientific foundation for the conception of higher performance catalysts, paving the way for technological innovation and advancements in NOx emission reduction practices.

chemistry, physical
Electronic Regulation of Bromophenyl Grafted Metal‐Free Carbon Nitride Catalysts for Enhanced Utilization of H2S

Lijuan Shen,Ganchang Lei,Yong Zheng,Shijing Liang,Fujian Liu,Shuai Wang,Yanning Cao,Yihong Xiao,Lilong Jiang

DOI: https://doi.org/10.1002/cctc.202100105

IF: 4.5

2021-01-01

ChemCatChem

Abstract:Developing metal-free heterogeneous catalysts with high efficiency for the elimination of H2S into eco-friendly products are very important for both fundamental catalytic science and industrial chemistry. Herein, we design a new modified carbon nitride catalyst engrafted with Br-substituted aromatic heterocycle (CNU-Br) through a simple copolymerization and exfoliation method. CNU-Br exhibits excellent H2S conversion efficiency, high sulfur selectivity, and outstanding stability in the catalytic desulfurization reaction, which is better than most of the reported catalysts. The experiments and theoretical calculations show that the grafting of bromophenyl groups into the fundamental carbon nitride structural network leads to pi-delocalization, surface modification, as well as enhances the basicity of the structural active N sites. The regulation of the H and S affinity of CNU-Br that mediate the facile cleavage of H2S hydrogen-sulfur bonds and the release of S atoms in thermodynamics. Furthermore, the superior surface area and mass transfer over CNU-Br accelerate the adsorption and oxidation of H2S in kinetics compared with the ordinary carbon nitride.
Copper Doping Promotion on Ce/CAC-CNT Catalysts with High Sulfur Dioxide Tolerance for Low-Temperature NH 3 –SCR

Lin Yang,Pengchen Wang,Lu Yao,Xiaomi Meng,Charles Q. Jia,Xia Jiang,Wenju Jiang

DOI: https://doi.org/10.1021/acssuschemeng.0c08490

2021-01-06

Abstract:The stumbling block to the ever-increasing need for improving air quality remains nitrogen oxides (NO x ). The copper-introduced Ce/CAC-CNT (Cu x Ce/CAC-CNTs) catalyst using the in situ-growth-prepared activated carbon and carbon-nanotube composite (CAC-CNT) carrier with high sulfur dioxide tolerance was successfully applied to low-temperature NH3–SCR in this study. The findings indicate that the Cu x Ce/CAC-CNTs obtained at a 0.2 Cu/Ce molar ratio and the calcination temperature of 450 °C showed the highest 100% NO conversion with 95.8% N2 selectivity at 150 °C and 10 000 h–1. The incorporation of Cu improved the Cu0.2Ce/CAC-CNTs in Lewis acid, lattice oxygen (31.99%), and Ce3+ (26.03%). The accelerated NH3 adsorption on acid sites, the encouraging electron transfer by the Ce4+ + Cu+ ↔ Ce3+ + Cu2+ redox circle, and the more surface chemisorbed oxygen (Oβ) improved the catalytic activity of Cu0.2Ce/CAC-CNTs. The NH3–SCR of Cu0.2Ce/CAC-CNTs largely follows the L–H mechanism, together with a certain degree of “Fast SCR.” The added Cu species effectively prevented surface SO2 adsorption and oxidation, and the Cu0.2Ce/CAC-CNTs restored more than 94% SCR activity after 8 h of poisoning in 50 ppm SO2 and 5 vol % H2O.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Combined Experimental and Density Functional Theory Study on the Mechanism of the Selective Catalytic Reduction of NO with NH 3 over Metal-Free Carbon-Based Catalysts

Rucheng Duan,Zhuocan Li,Yu Fu,Yulong Shan,Yunbo Yu,Guangzhi He,Hong He

DOI: https://doi.org/10.1021/acs.est.4c00584

IF: 11.4

2024-03-13

Environmental Science & Technology

Abstract:Metal-free carbon-based catalysts are attracting much attention in the low-temperature selective catalytic reduction of NO(x) with NH(3) (NH(3)-SCR). However, the mechanism of the NH(3)-SCR reaction on carbon-based catalysts is still controversial, which severely limits the development of carbon-based SCR catalysts. Herein, we successfully reconstructed carbon-based catalysts through oxidation treatment with nitric acid, thereby enhancing their low-temperature activity in NH(3)-SCR. Combining...

environmental sciences,engineering, environmental
Enhanced Selective Catalytic Reduction of NOx with NH3 over Homoatomic Dinuclear Sites in Defective Α-Fe2o3

Nana Zhang,Jin Wang,Qian Li,Ying Xin,Lirong Zheng,Yingxia Wang,Zhaoliang Zhang

DOI: https://doi.org/10.1016/j.cej.2021.131845

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Catalytic reactions that require more than one active sites are popular, such as selective catalytic reduction of NOx with NH3 (NH3-SCR) for the elimination of NOx contaminant containing redox and acid dinuclear sites. Doping/supporting other elements is a general strategy for introduction of the one that catalysts lack. Herein, we prepared a highly defective alpha-Fe2O3 with enhanced acid (Lewis and Bronsted) and redox properties on homoatomic dinuclear sites comprising more positively charged Fe3+ and oxygen vacancy-coupled Fe2+ ions. The NH3-SCR activity is improved at lower temperature without adding another acid transition metal. Furthermore, the significant amounts of Bronsted acid provide precaution against the poisoning of H2O and SO2. This work greatly broadened applicability of the state of the art concept of dinuclear sites for NH3-SCR and open a new avenue to enhance activity via defective engineering for a single metal oxide.
Electronic Regulation of Bromophenyl Grafted Metal‐Free Carbon Nitride Catalysts for Enhanced Utilization of H 2 S

Lijuan Shen,Ganchang Lei,Yong Zheng,Shijing Liang,Fujian Liu,Shuai Wang,Yanning Cao,Yihong Xiao,Lilong Jiang

DOI: https://doi.org/10.1002/cctc.202100105

IF: 4.5

2021-03-23

ChemCatChem

Abstract:Developing metal‐free heterogeneous catalysts with high efficiency for the elimination of H2S into eco‐friendly products are very important for both fundamental catalytic science and industrial chemistry. Herein, we design a new modified carbon nitride catalyst engrafted with Br‐substituted aromatic heterocycle (CNU‐Br) through a simple copolymerization and exfoliation method. CNU‐Br exhibits excellent H2S conversion efficiency, high sulfur selectivity, and outstanding stability in the catalytic desulfurization reaction, which is better than most of the reported catalysts. The experiments and theoretical calculations show that the grafting of bromophenyl groups into the fundamental carbon nitride structural network leads to π‐delocalization, surface modification, as well as enhances the basicity of the structural active N sites. The regulation of the H and S affinity of CNU‐Br that mediate the facile cleavage of H2S hydrogen‐sulfur bonds and the release of S atoms in thermodynamics. Furthermore, the superior surface area and mass transfer over CNU‐Br accelerate the adsorption and oxidation of H2S in kinetics compared with the ordinary carbon nitride.

chemistry, physical
Promoting Electrocatalytic CO2 Reduction to CO via Sulfur‐Doped Co‐N‐C Single‐Atom Catalyst

Zhiming Wei,Yuhang Liu,Jie Ding,Qinye He,Qiao Zhang,Yueming Zhai

DOI: https://doi.org/10.1002/cjoc.202300372

IF: 5.56

2023-08-17

Chinese Journal of Chemistry

Abstract:Comprehensive Summary Electrocatalytic reduction of CO2 to fuels and chemicals possesses huge potential to alleviate current environmental crisis. Heteroatom doping in metal‐nitrogen‐carbon (M‐N‐C) single‐atom catalysts (SACs) has been found capable to promote the electrocatalytic CO2 reduction reaction (CO2RR). However, the origin of the enhanced activity is still elusive. Here, we report that sulfur‐doped cobalt‐nitrogen‐carbon single‐atom catalyst (Co1‐SNC) exhibits superior CO2RR performance compared to sulfur‐free counterpart (Co1‐NC). On the basis of in situ attenuated total reflectance surface‐enhanced infrared absorption spectroscopy (ATR‐SEIRAS), kinetic isotope effect (KIE) and theoretical calculation, it is demonstrated that sulfur doping can promote water activation, elevate the d‐band center of Co active site, and reduce the free energy of *COOH intermediate formation. This work deepens the understanding of the CO2RR chemistry over heteroatom‐doped SACs for designing efficient CO2RR processes. This article is protected by copyright. All rights reserved.

chemistry, multidisciplinary
Boosting SO2-Resistant NOx Reduction by Modulating Electronic Interaction of Short-Range Fe-O Coordination over Fe2O3/TiO2 Catalysts

Xiangyu Liu,Penglu Wang,Yongjie Shen,Lirong Zheng,Lupeng Han,Jiang Deng,Jianping Zhang,Aiyong Wang,Wei Ren,Feng Gao,Dengsong Zhang

DOI: https://doi.org/10.1021/acs.est.2c01812

IF: 11.4

2022-01-01

Environmental Science & Technology

Abstract:SO2-resistant selective catalytic reduction (SCR) of NOx remains a grand challenge for eliminating NOx generated from stationary combustion processes. Herein, SO2-resistant NOx reduction has been boosted by modulating electronic interaction of short-range Fe-O coordination over Fe2O3/TiO2 catalysts. We report a remarkable SO2-tolerant Fe2O3/TiO2 catalyst using sulfur-doped TiO2 as the support. Via an array of spectroscopic and microscopic characterizations and DFT theoretical calculations, the active form of the dopant is demonstrated as SO42- residing at subsurface TiO6 locations. Sulfur doping exerts strong electronic perturbation to TiO2, causing a net charge transfer from Fe2O3 to TiO2 via increased short-range Fe-O coordination. This electronic effect simultaneously weakens charge transfer from Fe2O3 to SO2 and enhances that from NO/NH3 to Fe2O3, resulting in a remarkable "killing two birds with one stone" scenario, that is, improving NO/NH3 adsorption that benefits SCR reaction and inhibiting SO2 poisoning that benefits catalyst long-term stability.
Review of Sulfur Promotion Effects on Metal Oxide Catalysts for NO<i><sub>x</sub></i> Emission Control

Renyi Xie,Lei Ma,Zihao Li,Zan Qu,Naiqiang Yan,Junhua Li

DOI: https://doi.org/10.1021/acscatal.1c02197

IF: 12.9

2021-01-01

ACS Catalysis

Abstract:Sulfur poisoning is a common problem causing catalyst deactivation during the industrial catalytic process. However, for selective catalytic reduction of NOx with ammonia (NH3-SCR) technology, the formation of sulfate species from SO2 in flue gas could remarkably improve NH3-SCR performance by adjusting the surface acidity of the metal oxides. This Review systematically summarizes recent advances concerning sulfur promotion roles of metal oxide catalysts for the NH3-SCR reaction. First, the effects of sulfation treatment on the properties of sulfate species are discussed and compared in detail. The synthesis procedures and the critical parameters of gas-phase and liquid-phase methods are introduced. Second, it is tentative to conclude how the sulfation treatments coordinate acid and metal sites and propose a comprehensive overview of the reaction mechanisms over sulfated catalysts. Subsequently, it summarizes the effective methods to construct appropriate acidity and reducibility of sulfated metal oxides by exposing crystal planes and creating specific structures, including CeO2-, Fe2O3-, V2O5-, and CuO-based catalysts. The corresponding reaction pathways are also deliberated over specific catalysts. Finally, current scientific issues and prospects of sulfated catalysts are put forward, and other acidification methods are supposed to improve the surface acidity effectively. For future NH3-SCR technology, the experimental and mechanistic discussions in this Review will be beneficial to understand reaction chemistry and design highly efficient NH3-SCR catalysts.
A Facile and Controllable in Situ Sulfation Strategy for CuCeZr Catalyst for NH3-SCR

Shihao Wang,Chi Fan,Ziqi Zhao,Qi Liu,Gang Xu,Minghong Wu,Jianjun Chen,Junhua Li

DOI: https://doi.org/10.1016/j.apcata.2020.117554

IF: 5.723

2020-01-01

Applied Catalysis A General

Abstract:The Cu-based transition-metal-oxide catalysts were widely applied for the selective catalytic reduction of NOx with NH3 (NH3-SCR), but limited in practical application because of the inferior catalytic performance at high temperatures. To counter this issue, we designed a facile in situ strategy to obtain sulfated CuCeZr catalysts, on which the sulfation degree could be precisely controlled without any further post-treatment. The sulfated CuCeZr catalysts not only show broader SCR reaction temperature window and promoted N-2 selectivity, but also demonstrate satisfactory tolerance to H2O and SO2. The outcomes indicate that stronger surface acidity, weaker reducibility and excellent stability for adsorbing NH3 on the sulfated CuCeZr catalysts greatly suppress the undesired excessive oxidation of NH3 at high temperatures, which enhance the high-temperature activity and N-2 selectivity. Furthermore, the transient in situ DRIFT and steady-state kinetic studies reveal that both unsulfated and sulfated catalysts mainly follow the Eley-Rideal mechanism.
In situ construction of heteroatom F-doped Mn3O4 spinel catalysts with robust activity and SO2 resistance for NH3-SCR at low temperature

Chong Chen,Yunxia Wang,Junxi Li,Fengyu Tian,Weijuan Chen,Chao Feng,Yuan Pan,Yunqi Liu

DOI: https://doi.org/10.1016/j.apcatb.2023.123086

2023-12-01

Abstract:Herein, we propose a novel in situ construction method of F-doped Mn3O4 catalysts through a crystallization-pyrolysis-oxidation strategy. The F-Mn3O4-3 % exhibits a NO conversion above 90 % from 150° to 310°C at an ultra-high GHSV of 400,000 h−1. The SO2 resistance is also significantly improved compared to pure Mn3O4. Doping of Mn3O4 with F increases the surface acidity and tunes the electronic properties of the catalysts. The increase of acid sites not only facilitates the adsorption of NH3 species, thereby improving NH3-SCR activity, but also inhibits SO2 adsorption on the catalyst surface. The electron conduction between SO2 and Mn3+ can also be effectively inhibited after F replaces O, resulting in the F-doped Mn3O4 catalysts can selectively oxidizing NO to NO2 rather than oxidizing SO2 to SO3, thereby causing the decrease of sulfate species. Our work provides a novel idea for the design of SCR catalysts with high activity and SO2 resistance.

chemistry, physical,engineering, chemical, environmental
Working-in-tandem mechanism of multi-dopants in enhancing electrocatalytic nitrogen reduction reaction performance of carbon-based materials

Wenqing Zhang,Keke Mao,Jingxiang Low,Hengjie Liu,Yanan Bo,Jun Ma,Qiaoxi Liu,Yawen Jiang,Jiuzhong Yang,Yang Pan,Zeming Qi,Ran Long,Li Song,Yujie Xiong

DOI: https://doi.org/10.1007/s12274-021-3315-1

IF: 9.9

2021-01-20

Nano Research

Abstract:Developing carbon-based electrocatalysts with excellent N2 adsorption and activation capability holds the key to achieve highly efficient nitrogen reduction reaction (NRR) for reaching its practical application. Here, we report a highly active electrocatalyst—metal-free pyrrolic-N dominated N, S co-doped carbon (pyrr-NSC) for NRR. Based on theoretical and experimental results, it is confirmed that the N and S-dopants practice a working-in-tandem mechanism on pyrr-NSC, where the N-dopants are utilized to create electropositive C sites for enhancing N2 adsorption and the S-dopants are employed to induce electron backdonation for facilitating N2 activation. The synergistic effect of the pyrrolic-N and S-dopants can also suppress the irritating hydrogen evolution reaction, further boosting the NRR performance. This work gives an indication that the combination of two different dopants on electrocatalyst can enhance NRR performance by working in the two tandem steps—the adsorption and activation of N2 molecules, providing a new strategy for NRR electrocatalyst design.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology

Silver Bullet Talks with Nicole Perlroth

Boosting Electrochemical Ammonia Synthesis via NOx Reduction over Sulfur‐Doped Copper Oxide Nanoneedle Arrays

Enhanced nitrogen electroreduction to ammonia activities on Sb 2 S 3 electrocatalyst by sulfur defects coupled with carbon doping

Promotion effect of nitrogen doping on the low-temperature NH 3 -SCR of NO over activated carbon: Characterization and mechanism analysis

Boosting Low-Temperature NH3-SCR Performance Via Mixed-Valence Cobalt Dual Active Sites

"Oxynitride trap" over N/S co-doped graphene-supported catalysts promoting low temperature NH3-SCR performance: Insight into the structure and mechanisms

A facile MnSO4 surface coated NiMnFeOx catalyst with enhanced SO2 resistance for SCR reaction: A dual-protection mechanism

Modulating active sites: A-site doped ACu-CeO 2 catalyst for efficient CO-SCR of NO

S-doped M-N-C catalysts for the oxygen reduction reaction: Synthetic strategies, characterization, and mechanism

Influence of Catalyst Structural Remodelling on The Performance of NH3 ‐SCR Reactions: A Mini Review

Electronic Regulation of Bromophenyl Grafted Metal‐Free Carbon Nitride Catalysts for Enhanced Utilization of H2S

Copper Doping Promotion on Ce/CAC-CNT Catalysts with High Sulfur Dioxide Tolerance for Low-Temperature NH 3 –SCR

Combined Experimental and Density Functional Theory Study on the Mechanism of the Selective Catalytic Reduction of NO with NH 3 over Metal-Free Carbon-Based Catalysts

Enhanced Selective Catalytic Reduction of NOx with NH3 over Homoatomic Dinuclear Sites in Defective Α-Fe2o3

Electronic Regulation of Bromophenyl Grafted Metal‐Free Carbon Nitride Catalysts for Enhanced Utilization of H 2 S

Promoting Electrocatalytic CO2 Reduction to CO via Sulfur‐Doped Co‐N‐C Single‐Atom Catalyst

Boosting SO2-Resistant NOx Reduction by Modulating Electronic Interaction of Short-Range Fe-O Coordination over Fe2O3/TiO2 Catalysts

Review of Sulfur Promotion Effects on Metal Oxide Catalysts for NO<i><sub>x</sub></i> Emission Control

A Facile and Controllable in Situ Sulfation Strategy for CuCeZr Catalyst for NH3-SCR

In situ construction of heteroatom F-doped Mn3O4 spinel catalysts with robust activity and SO2 resistance for NH3-SCR at low temperature

Working-in-tandem mechanism of multi-dopants in enhancing electrocatalytic nitrogen reduction reaction performance of carbon-based materials