Abstract:Protein-rich (58.50%) Chlorella sp. was hydrothermally pretreated at 175 °C to remove part of N, and the obtained solid residue (ChSR) was then co-pyrolyzed with polypropylene (PP) to reduce O content and improve bio-oil quality. About 48.25% of N was enriched into the aqueous phase during hydrothermal pretreatment (HTP) process, and about 15.70% of bio-oil with low N content (3.45%) was obtained. Compared with that of raw sample, the structure of ChSR was further aromatized as revealed by 13C NMR analysis. The interaction between ChSR and PP was deeply investigated with the help of online TG-FTIR-MS and Py-GC/MS. The co-pyrolysis process of ChSR-PP blends was generally divided into two thermal decomposition stages. The first stage (150–400 °C) was mainly associated with decomposition of ChSR, while the second stage (400–550 °C) was the results of combination of thermal degradations of ChSR and PP, with the primary contribution from the degradation of PP. The addition of PP accelerated pyrolysis of ChSR and inhibited the release of C2H5O+/COOH+ and NH3 but promoted CO2 releasing at the first stage. However, ChSR delayed the pyrolysis of PP and prohibited release of H2 and light hydrocarbons (i.e., CH4, C2H2, C2H6, C3H7, and so on) from PP at the second stage. Kinetic analysis based on the Flynn-Wall-Ozawa (FWO) method revealed that the average activation energy (E) of the blends at the two decomposition stages were 159.10–164.12 kJ/kg and 194.20–219.86 kJ/kg, respectively. Results of Py-GC/MS indicated that, the synergistic effect between ChSR and PP significantly enhanced the formation of hydrocarbons (i.e., cyclohexane derivatives and 2,4-Dimethyl-1-heptene), and the interaction achieved maximum when the ratio of ChSR:PP was 80:20. The yields of O-containing compounds (alcohols, and phenols) and BTEXs (Benzene series) were decreased. It should be noted that both the amounts and kinds of N-heterocyclic compounds were decreased. Finally, the possible mechanism on interaction between ChSR and PP was also proposed. This work will provide useful information on better utilization of high-protein microalgae.

Influence of graphite/alumina on co-pyrolysis of Chlorella vulgaris and polypropylene for producing bio-oil

Microwave-assisted co-pyrolysis of chlorella vulgaris and polypropylene: Characteristic and product distribution analyses

Characteristics and Synergistic Effects of Co-Pyrolysis of Microalgae with Polypropylene

Study on microwave-assisted co-pyrolysis and bio-oil of Chlorella vulgaris with high-density polyethylene under activated carbon

Synergistic effects on co-pyrolysis of low-temperature hydrothermally pretreated high-protein microalgae and polypropylene

Synergistic effect study of Chlorella vulgaris and polyethylene in co-pyrolysis process based on kinetic and thermodynamic analysis

Co-pyrolysis of lignocellulosic biomass and microalgae: Products characteristics and interaction effect.

Synergistic effects of co-pyrolysis of macroalgae and polyvinyl chloride on bio-oil/bio-char properties and transferring regularity of chlorine

Co-pyrolysis of microalgae and plastic: Characteristics and interaction effects

Effect of Ni/Al2O3 mixing on the coking behavior of bio-oil during its pyrolysis: Further understanding based on the interaction between its components

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Catalytic co-pyrolysis behaviors, product characteristics and kinetics of rural solid waste and chlorella vulgaris

A TG-IR study on the co-pyrolysis characteristics of oily sludge and crops

Microwave catalytic co-pyrolysis of Chlorella vulgaris and high density polyethylene over activated carbon supported monometallic: Characteristics and bio-oil analysis

Synergistic Effects on Char and Oil Produced by the Co-Pyrolysis of Pine Wood, Polyethylene and Polyvinyl Chloride

Enhanced biofuel production by co-pyrolysis of distiller's grains and waste plastics: A quantitative appraisal of kinetic behaviors and product characteristics

Co-pyrolysis of microalgae and other biomass wastes for the production of high-quality bio-oil: Progress and prospective

Study on the properties and components of solid-liquid products by co-pyrolysis of sludge and cotton stalk

Synergistic effects from co-pyrolysis of low-rank coal and model components of microalgae biomass

Catalytic Co-Pyrolysis of Cellulose and Polypropylene over All-Silica Mesoporous Catalyst MCM-41 and Al-MCM-41.