Co-pyrolysis of microalgae and plastic: Characteristics and interaction effects

Ziyue Tang,Wei Chen,Yingquan Chen,Haiping Yang,Hanping Chen
DOI: https://doi.org/10.1016/j.biortech.2018.11.083
IF: 11.4
2019-02-01
Bioresource Technology
Abstract:To improve the quality of the oil produced from microalgae, the co-pyrolysis of low-density polyethylene (LDPE) and Nannochloropsis sp. (NS) in a fixed bed reactor was investigated at different mixing ratios. Co-pyrolysis improved the gas yield, and the lower heating value of the gas products increased obviously with an increase in the LDPE amount. Furthermore, co-pyrolysis promoted the generation of CH<sub>4</sub> and C<sub>2+</sub>, especially C<sub>2</sub>H<sub>4</sub>, with the maximum C<sub>2+</sub> yield (84.86 mL/g) obtained with 75% LDPE. Meanwhile, the amounts of oxygenous and nitrogenous compounds in the liquid products decreased rapidly with LDPE addition. The aliphatic hydrocarbon content of the liquid products increased from 22.63% for NS pyrolysis to 77.4% with 25% LDPE. During co-pyrolysis with LDPE, O tended to evolve as H<sub>2</sub>O and CO (rather than as CO<sub>2</sub> for NS pyrolysis) and N was more likely to be released into gas products, which enhanced the quality of the pyrolysis oil.
energy & fuels,biotechnology & applied microbiology,agricultural engineering
What problem does this paper attempt to address?