Abstract:A new potassium-based adsorbent for CO2 capture with Al aerogel used as support is proposed in this work. The adsorbents with different surface modifiers (tetraethyl orthosilicate (TEOS) and trimethyl chlorosilane (TMCS)) and different K2CO3 loadings (10%, 20%, 30% and 40%) were prepared by sol-gel and iso-volume impregnation processes with ambient pressure drying. The CO2 adsorption performance of the adsorbents were tested by a fixed-bed reactor, and their adsorption mechanisms were studied by scanning electron microscopy (SEM), Brunauer Emmett Teller (BET), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and X-ray fluorescence spectrometry (XRF). Furthermore, the adsorption kinetics and the cycling performance were investigated. The results show that using TEOS to modify the wet gel can introduce SiO2 to increase the strength of the skeleton. On the basis of TEOS modification, TMCS can further modify –OH, thus effectively avoiding the destruction of aerogel structure during ambient drying and K2CO3 impregnation. In this work, the specific surface area and specific pore volume of Al aerogel modified by TEOS + TMCS are up to 635.32 cm2/g and 2.43 cm3/g, respectively. The aerogels without modification (Al-B), TEOS modification (Al/Si) and TEOS + TMCS modification (Al/Si-TMCS) showed the best CO2 adsorption performance at 20%, 30% and 30% K2CO3 loading, respectively. In particular, the CO2 adsorption capacity and K2CO3 utilization rate of Al/Si-TMCS-30K are as high as 2.36 mmol/g and 93.2% at 70 degrees Celsius (°C). Avrami’s fractional order kinetic model can well fit the CO2 adsorption process of potassium-based adsorbents. Al-B-20K has a higher apparent activation energy and a lower adsorption rate during the adsorption process. After 15 adsorption-regeneration cycles, Al/Si-TMCS-30K maintain a stable CO2 adsorption capacity and framework structure, while the microstructure of Al/Si-30K is destroyed, resulting in a decrease in its adsorption capacity by nearly 30%. This work provides key data for the application of Al aerogel in the field of potassium-based adsorbent for CO2 capture.

Effect of operating parameters for CO2 capture from syngas of supercritical water gasification using K2CO3/γ-Al2O3 composite adsorbent

Effect of operating parameters for CO 2 capture from syngas of supercritical water gasification using K 2 CO 3 /γ-Al 2 O 3 composite adsorbent

A basic study on the nano CaO-based CO2 adsorbents in FFB for CO2 capture

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

CO2 adsorption on Cu-BTC to improve the quality of syngas produced from supercritical water gasification

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

CO 2 Adsorption on Cu-BTC to Improve the Quality of Syngas Produced from Supercritical Water Gasification

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Synthesis, Pelleting, and Performance Evaluation of a Novel K-Promoted Γ-Alumina/mgal-layered Double Oxide Composite Adsorbent for Warm Gas H2/CO2 Separation

Study on CO2 Capture Performance by Potassium-Promoted MgAl-Hydrotalcite Adsorbent

Experimental Investigation of the Effects of Inorganic Components on the Supercritical Water Gasification of Semi-Coke

Cu-BTC-based composite adsorbents for selective adsorption of CO2 from syngas

K2CO3-Impregnated Al/Si Aerogel Prepared by Ambient Pressure Drying for CO2 Capture: Synthesis, Characterization and Adsorption Characteristics.

Potassium-Promoted Γ-Alumina Adsorbent from K2CO3 Coagulated Alumina Sol for Warm Gas Carbon Dioxide Separation

Characterization on Trace Carbon Monoxide Leakage in High Purity Hydrogen in Sorption Enhanced Water Gas Shifting Process

Variation of pore structure in Zhundong coal particle with stepped K2CO3 loading during supercritical water gasification

Numerical simulation on adsorption of CO2 using K2CO3 particles in the bubbling fluidized bed

Hydrogen-rich syngas upgrading via CO2 adsorption by amine-functionalized Cu-BTC: the effect of different amines

Design, characterization and scale-up test of a high performance pre-combustion CO2 adsorbent