Abstract:During the construction of tunnel using shield method, the rock breaking performance of hob is one of the key factors that determines the successful construction of subway tunnel. In this study, a mechanics model of shield hob based on the Colorado School of Mines (CSM) model and a discrete element model of shield hob based on particle flow code (PFC) are established on the basis of the shield construction of ultrahigh hard rock section from Agricultural and Forestry University Station to Hongtang Station of Fuzhou Metro Line No. 5. These models are used to reveal the rock breaking law under different hob types (single-edged hob, double-edged hob and edge hob) and numbers (single hob, double hobs, three hobs and full hobs). Laboratory test results show that the discrete element model based on PFC has high accuracy. Numerical simulation results show that the vertical force and rolling force of the single-edged hob and double-edged hob increase with the increase in the distance between the installation position of the hob and the centre of the cutter, whereas that of the edge hob are less affected. With the increase in the number of hobs, the hard rock gradually forms a through joint from a single crack, and the vertical force and torque of a single hob decrease. Comparative results of the theoretical and numerical simulation show that the maximum errors of vertical force and torque are 10.9% and 47.3%, respectively, and they are 11.3% and 37.5% of the rated value of No. 552 shield machine of China Railway. These values meet the engineering requirements and can provide reference for shield selection and shield tunnel construction in the future.

Disc hobbing cutter box mechanism of shield tunneling machine and application method thereof

Closed - Loop Hydraulic System of Cutter- Devices for Shield Tunneling Machine

Mechanical structure and hydraulic system design of 1.2 m simulated shield machine

The Shield Tunneling Machine Experiment System for the Earth Pressure Balance Control Mechanism

A Hydraulic System for Cutterhead of Shield Tunnel Boring Machine

Hydraulic Control System of Pipe Piece Installing Machine in a Shield

Tunnel bottom deposited slag clearing device and method of hard rock tunneling machine

Design and Test of the Cutter-devices Hydraulic System of the Shield Tunneling Machine Based on System Recomposed Technology

Hydraulic Systems on Tunnel Shields and Related Energy-saving Techniques

Torque Calculation Model of Cutting Head in Shield Machine and Experimental Study

Hydraulic Variable Speed Drive System of Shield Disk Cutter

Disc cutters’ layout design of the full-face rock tunnel boring machine (TBM) using a cooperative coevolutionary algorithm

Variable speed pump control system for driving cutter head of test shield tunneling machine

Design and Experiment of Electro-Hydraulic Proportional Control System for the Cutter-Head Drive of the Shield Tunneling Machine

Efficiency Comparative Study for Hydraulic Drive System of Cutter Head in Shield Tunneling Machine

Fragmentation Energy-Saving Theory of Full Face Rock Tunnel Boring Machine Disc Cutters

Analysis on Soil Discharging Control of Auger Conveyor on Soil Pressure Balancing Shield

Research into the intelligent control of the cutter head drive system in Shield tunnelling machine based on the pattern recognition

Horseshoe pen type shield body structure and shield body structure construction technology thereof

Mechanical Behavior and Rock Breaking Mechanism of Shield Hob Based on Particle Flow Code (PFC) Method