Abstract:Face-centered cubic (fcc) high and medium entropy alloys (H/MEAs) have been shown to display superior mechanical properties at low temperatures, but significant improvement of their strength at high temperatures is required for industrial applications at extreme conditions. Recently, it has been shown that the breakthrough of the MEAs from equiatomic/near-equiatomic to non-equiatomic ratios leads to strong MEAs with good ductility. To design new H/MEAs, we consider two important factors that may influence strength: the chemical composition and chemical short range order (CSRO). In this study, we investigate the depinning stress ( σ c ) as a criterion of strength of several compositions of VCoNi concentrated solid solution alloys (CSSAs) including V 0.33 Co 0.33 Ni 0.33 , V 0.35 Co 0.2 Ni 0.45 , V 0.33 Co 0.17 Ni 0.5 , and V 0.17 Co 0.33 Ni 0.5 at 5 K and 300 K, using atomistic simulations. The chosen interatomic potential is shown to be reliable by comparing experimental/ ab initio values and calculated parameters such as lattice constant, shear modulus, depinning stress, and temperature variation of stacking fault width for equimolar VCoNi. We find a good agreement between experimental friction stress and the depinning stress extracted from our results for equimolar VCoNi. Also, we find that Vclusters are the main pinning points of dislocations, and With a random distribution of atoms, we find that the alloy composition V 0.33 Co 0.17 Ni 0.5 displays the largest depinning stress at both 5 and 300 K. Furthermore, to investigate how CSRO affects the strength of these alloys, we design CSRO into the microstructure using two different methods: In the first method, hybrid Molecular-dynamics/Monte-Carlo simulations were employed to simulate annealing at various temperatures. We observe that such simulations create CSRO so that it increases with decreasing annealing temperature. Recently, the CSRO motif and its concentration in an equimolar VCoNi have been determined by experiment. By modeling this experiment, we also implemented the CSRO into microstructure as the second method. By using both methods, the effect of CSRO on the magnitude of the depinning stress is discussed. It was shown that in both methods, CSRO significantly influences the strength of non-equimolar VCoNi alloys.

Comparative analysis of mechanical properties in single-phase Ti50-ZrVNbCr medium entropy alloys with different physical parameters

Systematic analysis of tensile properties of the TiVNbMoCr high entropy alloys in terms of the physical parameters

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Optimizing strength-ductility synergy of the solid-solution Ti50–ZrVNbCr MEAs via coordinately adjusting VEC and lattice constant

Synergetic Enhancement of Strength and Ductility Via a Heterogeneous Structure with Short-Range Clustering: A Novel Ti-V-Zr Medium Entropy Alloy

Effect of the Valence Electron Concentration on the Yield Strength of Ti–Zr–Nb–V High-Entropy Alloys

Dual Enhancement in Strength and Ductility of Ti-V-Zr Medium Entropy Alloy by Fracture Mode Transformation Via a Heterogeneous Structure

Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy

Alloying Effect on Elastic and Mechanical Properties of Refractory Medium-Entropy Alloys from First-Principles Calculations

Effects of V Addition on the Deformation Mechanism and Mechanical Properties of Non-Equiatomic CoCrNi Medium-Entropy Alloys

High friction stress and weak grain-refinement strengthening effect induced by severe lattice distortion in ZrTiNb medium entropy alloys

Decreasing Zr content to improve tensile properties of non-equiatomic TiZrHfNb medium entropy alloys with transformation-induced plasticity

An as-cast Ti-V-Cr-Al light-weight medium entropy alloy with outstanding tensile properties

Strain Hardening Behavior of Ti-Rich Light-Weight Medium Entropy Alloys with Excellent Strength and Plasticity Synergy

The effect of configurational entropy on mechanical properties of single BCC structural refractory high-entropy alloys systems

First-principles design of high strength refractory high-entropy alloys

The Stability and Elasticity in Ta-Ti-V Medium-Entropy Alloys Using First-Principles Calculations

Elastic behavior of binary and ternary refractory multi-principal-element alloys

Ultrahigh grain boundary strengthening ability of VCoNi medium entropy alloy

First-principles calculation of the effect of Ti content on the structure and properties of TiVNbMo refractory high-entropy alloy

Atomistic simulations of dislocation plasticity in concentrated VCoNi medium entropy alloys: Effects of lattice distortion and short range order