Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The fatigue strength curves for fiber reinforced laminates are normally available at certain combinations of load ranges and minimum-to-maximum load ratios. The data are alternatively presented in the form of a constant life diagram. Real-world signals contain, however, a finite number of load ranges and mean values pairs which rarely coincide with those experimentally measured. For fatigue assessment purposes, an interpolation in the constant life diagram, seeking for fatigue strength curves not originally measured, is needed. It is the aim of this paper to present and apply a new way for interpolating in the constant life diagram. The interpolated fatigue strength curve is then used in a simulated fatigue life prediction case study. The source for fatigue loads comes from two normalized load signals of variable amplitude that can be scaled to any desirable (and reasonable) maximum stress maximum stress value. In this way, two predicted maximum stress versus cycles to failure can be computed. The relative position of these two curves agrees with the severity of each load signal which confirms the consistency of the proposed algorithm. Furthermore, the variable amplitude curves fall below the experimental ones (at a load ratio [math]), that is, disregarding the interactions between large and small cycles implies in unacceptable (non-conservative) predictions in fatigue design.

An Adaptable Method for Rapid Fatigue Limit Prediction of Composite Materials Based on Acoustic Emission Technology

Prediction Model of Residual Load-Bearing Capacity of Composite Laminates Using Deep Learning

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Fatigue life prediction method of carbon fiber-reinforced composites

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Accelerated estimation of the very high cycle fatigue strength and life of polymer composites under ultrasonic cyclic three-point bending

A Deep Learning Method for Damage Prognostics of Fiber-Reinforced Composite Laminates Using Acoustic Emission

A physics-based acoustic emission energy method for mixed-mode impact damage prediction of composite laminates

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

Novel method for in situ damage monitoring during ultrasonic fatigue testing by the advanced acoustic emission technique

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

Fatigue-driven failure criterion for progressive damage modelling and fatigue life prediction of composite structures

Thermomechanical fatigue behavior of CF/PEKK composite under low and ultrasonic frequencies

Estimating fatigue life of carbon/epoxy composites: A rapid method coupling thermo‐mechanical analysis and residual strength

Fatigue life predictions under variable amplitude loading for composite materials

Acoustic Emission Based Monitoring of Fatigue Damage in CFRP-CFRP Adhesive Bonded Joints

Relationship between the Initial Fracture Stress and Fatigue Limit—Simple Prediction Method of Tensile Fatigue Limit of Composite