Abstract:In this study, the influence of the chitosan immobilization method on the properties of final hybrid materials was performed. Chitosan was immobilized on the surface of mesoporous (ChS2) and fumed silica (ChS3) by physical adsorption and the sol-gel method (ChS1). It was found that physical immobilization of chitosan allows to obtain hybrid composites (ChS) with a homogeneous distribution of polymer on the surface, relatively wide pores, and specific surface area of about 170 m2/g, pHPZC = 5.7 for ChS3 and 356 m2/g and pHPZC = 6.0 for ChS2. The microporous chitosan-silica material with a specific surface area of 600 m2/g and a more negatively charged surface (pHPZC = 4.2) was obtained by the sol-gel reaction. The mechanisms of azo dye adsorption were studied, and the correlation with the composite structure was distinguished. The generalized Langmuir equation and its special cases, that is, Langmuir-Freundlich and Langmuir equations, were applied for the analysis of adsorption isotherm data. The adsorption study showed that physically adsorbed chitosan (ChS1 and ChS2) on a silica surface has a higher sorption capacity, for example, 0.48 mmol/g for the acid red 88 (AR88) dye (ChS2) and 0.23 mmol/g for the acid orange 8 (AO8) dye (ChS1), compared to the composite obtained by the sol-gel method [ChS1, 0.05 mmol/g for the AO8 dye]. For a deeper understanding of the behavior of immobilized chitosan in the adsorption processes, various kinetic equations were applied: first-order, second-order, mixed 1,2-order (MOE), multiexponential, and fractal-like MOE as well as intraparticle and pore diffusion model equations. In the case of AO8 dye, the adsorption rates were differentiated for three composites: for ChS3, 50% of the dye was removed from the solution after merely 5 min and almost 90% after 80 min. The slowest adsorption process controlled by the diffusion rate of dye molecules into the internal space of the pore structure was found for ChS1 (225 min halftime). In the case of ChS2, the rates for various dyes change in the following order: acid orange (AO7) > orange G (OG) > acid red 1 (AR1) > AR88 > AO8 (halftimes: 10.5 < 15.7 < 23.7 < 34.9 < 42.9 min).

Cell Adsorption and Selective Desorption for Separation of Microbial Cells by Using Chitosan-Immobilized Silica

Preparation of Cellulose Adsorbents with Ionic Liquid and Pore Expansion for Chromatographic Applications

Chitosan/Silica Nanocomposite Preparation from Shrimp Shell and Its Adsorption Performance for Methylene Blue

Chitosan-Silica Hybrid Matrix For Immobilized Metal Chelated Affinity Chromatography

Membrane surfaces immobilized with ionic or reduced silver and their anti-biofouling performances

Protein Adsorption and Separation on Amphoteric Chitosan/carboxymethylcellulose Membranes.

Chitosan-based membrane chromatography for protein adsorption and separation.

Immobilized Chitosan As a Selective Absorbent for the Nickel Removal in Water Sample.

A Novel Method To Prepare Chitosan Powder And Its Application In Cellulase Immobilization

Cross-linking Chitosan Immobilized on Silica Gel As a Matrix for Preparation of Affinity Chromatographic Material

Synthesis and Characterization of Porous Chitosan/Saccharomycetes Adsorption Microspheres

Microfluidic Preparation of Chitosan Microspheres with Enhanced Adsorption Performance of Copper(Ii)

Protein Adsorption and Separation with Chitosan-Based Amphoteric Membranes

Selective Adsorption Toward Hg(II) and Inhibitory Effect on Bacterial Growth Occurring on Thiosemicarbazide-Functionalized Chitosan Microsphere Surface.

Immobilization of a Nonspecific Chitosan Hydrolytic Enzyme for Application in Preparation of Water‐soluble Low‐molecular‐weight Chitosan

Preparation of Cross-Linked Cellulase Aggregates Onto Magnetic Chitosan Microspheres

Highly selective adsorption and biodegradation of emulsified oil by microorganisms embedded in SiO 2 hollow sphere bioreactor

Coating and Fusing Cell Membranes Onto A Silica Surface and Their Chromatographic Characteristics

Promising adsorbent for dye detoxification: Exploring the potential of chitosan sodium carboxymethylcellulose silk fibroin aerogel

Facile preparation of a novel iminodisuccinate modified chitin and its excellent properties as a silver bioadsorbent and antibacterial agent

Chitosan-Silica Hybrid Composites for Removal of Sulfonated Azo Dyes from Aqueous Solutions