Abstract:As interlayer cracking has become as a significant issue in ballastless tracks, investigating the mechanical properties and damage characteristics during uniaxial compression with non-coincident contact is vital for enhancing the operational performance of ballastless tracks. This study conducted experiments on interlayer non-coincident contact damage in double-block ballastless tracks with nominal normal pressures of 0.666 MPa, 1.244 MPa, 2.489 MPa, and 3.733 MPa. The research explored the relationship between normal load and normal deformation stiffness, analyzed the interlayer contact damage mechanism of concrete, and investigated the damage evolution mechanism under non-coincident contact conditions based on Acoustic Emission (AE) signals. The findings indicate that: I) When the nominal pressure is respectively less than and greater than 1.333 MPa, the normal deformation stiffness and normal load satisfy linear and power function relationships, respectively. II) The interaction of interlayer protrusions under non-coincident contact, combined with the outward expansion resulting from interlayer mutual compression deformation, are two significant factors contributing to the formation of tensile cracks, while the presence of significant shear stresses directly beneath the interlayer contact points is the primary cause of shear cracks. III) After loading, The ballastless track slab matrix remains undamaged, while the supporting layer matrix may experience comprehensive cracking when the nominal pressure exceeds 1.333 MPa. IV) During the stage of only interlayer interface damage, both tensile and shear cracks are the primary causes of concrete damage. In the stage where damage occurs to both the interlayer interface and matrix, tensile cracks play a dominant role. However, when comprehensive matrix cracking occurs, shear cracks take on a dominant role. The outcomes of this study contribute to a deeper understanding of the damage mechanisms of ballastless tracks under train loads following interlayer cracking. Particularly focusing on the evolution characteristics of damage under high interlayer pressure.

The effects of loading rates on the fracture characteristics at the bonding interface between steam concrete and self-compacting concrete using three-point bending test

A Novel Fatigue Cohesive Model for Interface Between Ballastless Track Slab and Self-Compacting Concrete

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Influence of interface crack on dynamic characteristics of CRTS III slab ballastless track on bridge

Experimental Study on the Bond Capacity of RC Beams Incorporating Concrete Strength, Corrosion and Loading Rate

Experimental study on fracture properties of self-compacting concrete

Predicting the cracking behavior of early-age concrete in CRTS III track

Investigation on Interface Damage between Cement Concrete Base Plate and Asphalt Concrete Waterproofing Layer under Temperature Load in Ballastless Track

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Fracture Parameters and Influencing Factors of Cement Asphalt Mortar

Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model

Investigation of the seismic performance of CRTS III slab ballastless track of high-speed railway under low-cycle reciprocating load

Effect of different loading rates on the fracture behavior of FRP‐reinforced concrete

Investigation of the Fatigue Behaviour of a Ballastless Slab Track–Bridge Structural System under Train Load

Transverse Cracking of Concrete Base Plate in CRTS III Ballastless Track Structure: Effects of Environmental Boundary Conditions

A study of loading rate effect fracture behavior of concrete based on digital image correlation and finite-element method

Effect of Loading Rate on the Bonding Strength Between Rebar and Concrete

Research on Fatigue Damage Evolution of the Base Plate Structure of China Railway Track System III Type Slab Ballastless Track under Heavy Haul Train Load

Mechanical properties and damage evolution features in uniaxial compression with non-coincident interlayer contact in double-block ballastless track

Research on Dynamic Performance of CRTSⅢ Type Slab Ballastless Track under Long-Term Service

Loading rate effect on fracture behavior of fiber reinforced high strength concrete using a semi-circular bending test