Abstract:Electrochemical hydrogen pump (EHP) cells, employing ultra-thin (This article refers specifically to films with a thickness of 12μm) proton exchange membranes (PEMs), are used in different fields such as hydrogen purification, hydrogen compression, and the rapid activation of hydrogen fuel cells. However, under certain extreme conditions, the voltage of an EHP cell with an ultra-thin proton exchange membrane can rise rapidly and trigger dielectric breakdown of the PEM, resulting in a PEM perforation and cell failure due to an internal short circuit. In order to investigate the failure mechanism, this paper comprehensively analyzes the electrochemical failure process leading to the breakdown of EHP cells. This investigation is accomplished by monitoring characteristic parameters such as voltage and resistance. The research outcomes indicate that the failure process in EHP cells can be divided into three stages: (I) Normal operation stage, (II) Carbon corrosion stage, and (III) Dielectric breakdown stage. In stage-I, the main process is the EHP reaction itself, the cell is undamaged and the cell voltage is about −0.22 V. In stage-II, the localized water shortage at the anode leads to a rapid increase in the anode ohmic overpotential, and the cell voltage is around −1.9 V, which reaches the carbon corrosion threshold. As a result, the anode catalyst layer undergoes a severe carbon corrosion reaction, generating CO and CO2 gases, and the cell performance decreases but the PEM is not seriously damaged. As substantial amount of anode water is consumed, the cell enters into stage-III. At this stage, the anode overpotential further increases, and the cell voltage reaches above −14 V, resulting in dielectric breakdown of the PEM, internal short circuit of the cell, and the cell cannot work normally. This study can enhance the understanding of the electrochemical failure process in EHP cells, thereby providing a basis for improving their durability and reliability.

Carbon corrosion: A novel termination mechanism of the water electrolysis plateau during voltage reversal

Deactivation mechanism for water splitting: Recent advances

Investigation of real-time changes and recovery of proton exchange membrane fuel cell in voltage reversal

Carbon Corrosion in Low-Temperature CO2 Electrolysis Systems

Decoupling, Quantifying, and Restoring Aging-Induced Zn-anode Losses in Rechargeable Aqueous Zinc Batteries

Improved electrochemical reversibility of Zn plating/stripping: a promising approach to suppress water-induced issues through the formation of H-bonding

Exploring and understanding the internal voltage losses through catalyst layers in proton exchange membrane water electrolysis devices

Carbon corrosion induced fuel cell accelerated degradation warning: From mechanism to diagnosis

Anode Corrosion of Zn-Air Fuel Cell: Mechanism and Protection

Degradation Behavior of Proton Exchange Membrane Fuel Cells under Hydrogen Starvation in Freezing Conditions

Reversion of Catalyst Valence States for Highly Efficient Water Oxidation

Deactivated Pt Electrocatalysts for the Oxygen Reduction Reaction: The Regeneration Mechanism and a Regenerative Protocol

A New Insight into the Chemical Degradation of Proton Exchange Membranes in Water Electrolyzers

Dynamic Galvanic Corrosion of Working Lithium Metal Anode Under Practical Conditions

Passivation and corrosion of Al current collectors in lithium-ion batteries

Recovering carbon losses in CO2 electrolysis using a solid electrolyte reactor

Failure mechanism of Dielectric breakdown in electrochemical hydrogen pumps

Stability Issues in Electrochemical CO2 Reduction: Recent Advances in Fundamental Understanding and Design Strategies

Revisiting the Corrosion of the Aluminum Current Collector in Lithium-Ion Batteries

Thickness effects of anode catalyst layer on reversal tolerant performance in proton exchange membrane fuel cell

Decoding the Mechanisms of Reversibility Loss in Rechargeable Zinc-Air Batteries