Abstract:Bacterial adhesion to stainless steel surfaces is one of the major reason causing the cross-contamination and infection in many practical applications. An approach to solve this problem is to enhance the antibacterial properties on the surface of stainless steel. In this paper, novel antibacterial stainless steel surfaces with different copper content have been prepared by a plasma surface alloying technique at various gas pressures. The microstructure of the alloyed surfaces was investigated using glow discharge optical emission spectroscopy (GDOES) and scanning electron microscopy (SEM). The viability of bacteria attached to the antibacterial surfaces was tested using the spread plate method. The antibacterial mechanism of the alloyed surfaces was studied by X-ray photoelectron spectroscopy (XPS). The results indicate that gas pressure has a great influence on the surface elements concentration and the depth of the alloyed layer. The maximum copper concentration in the alloyed surface obtained at the gas pressure of 60 Pa is about 7.1 wt.%. This alloyed surface exhibited very strong antibacterial ability, and an effective reduction of 98% of Escherichia coli (E. coli) within 1 h was achieved by contact with the alloyed surface. The maximum thickness of the copper alloyed layer obtained at 45 Pa is about 6.5 μm. Although the rate of reduction for E. coli of this alloyed surface was slower than that of the alloyed surface with the copper content about 7.1 wt.% over the first 3 h, few were able to survive more than 12 h and the reduction reached over 99.9%. The XPS analysis results indicated that the copper ions were released when the copper alloyed stainless steel in contact with bacterial solution, which is an important factor for killing bacteria. Based on an overall consideration of bacterial killing rate and durability, the alloyed surface with the copper content of 2.5 wt.% and the thickness of about 6.5 μm obtained at the gas pressure of 45 Pa is expected to be useful as antimicrobial materials that may have a promising future in antimicrobial applications. © 2011 Elsevier B.V. All rights reserved.

A novel nickel-copper alternating-deposition coating with excellent tribological and antibacterial property

Designing Cu chemical distribution in Ti(AlCu)N coatings for enhanced erosion-corrosion and antibacterial performance

Antibacterial copper-containing titanium nitride films produced by dual magnetron sputtering

Enhancing Antibacterial Performance: Structure, Phase Composition, and Microroughness of Selective Plated Copper Coatings on Medical-Grade Stainless Steel 1.4021 and Nickel Alloy Ni200

Antibacterial Anodic Aluminium Oxide-Copper Coatings on Aluminium Alloys: Preparation and Long-Term Antibacterial Performance

Influence of copper distribution in thermally sprayed Cu-bearing coatings on corrosion and microbial activity

Antibacterial Property, Corrosion and Discoloration Resistance of Pure Copper Containing Zn or Ni

Dual Antibacterial Properties of Copper‐Coated Nanotextured Stainless Steel

Corrosion Resistance and Micro-Tribological Properties of Nickel Hydroxide-Graphene Oxide Composite Coating

Surface microstructures and antimicrobial properties of copper plasma alloyed stainless steel

Microstructure, Wettability, Corrosion Resistance and Antibacterial Property of Cu-MTa2O5 Multilayer Composite Coatings with Different Cu Incorporation Contents

Effect of Diamond Nanoparticles in Electroless Ni-P-ND Coatings on Bacterial Anti-adhesive Behavior

Fabrication of a TiO2@Cu Core-Shell Nanorod Array as Coating for Titanium Substrate with Mechanical and Chemical Dual Antibacterial Property.

Microstructural Characterization and Corrosion Behaviors of Ni-Cu-Co Coatings Electrodeposited in Sulphate-Citrate Bath with Additives

Construction of a TiO2/Cu2O multifunctional coating on Ti-Cu alloy and its influence on the cell compatibility and antibacterial properties

Preparation and properties of Ni-P/Bi self-lubricating composite coating on copper alloys

Fabrication of Pdop/Ag/Pdop Film on NiTi Alloys for Enhancing Their Corrosion Resistant and Antibacterial Properties

Deposition Mechanism and Wear Resistance Nano Ni-Al2O3 Composite Coatings

In Situ Thermal Interactions of Cu-Based Anti-Corrosion Coatings on Steel Implemented by Surface Alloying

Long-term antibacterial effect of nano-skeletoned Cu-TiN films by dual magnetron sputtering

Preparation of the electroless Ni–P and Ni–Cu–P coatings on engine cylinder and their tribological behaviors under bio-oil lubricated conditions