Abstract:Process principle of preparing honeycomb composite structure filled with glass fiber. Honeycomb composite with excellent mechanical–physical properties had attracted extensive attention. To achieve outstanding sound insulation while maximizing the high‐performance of honeycomb composite, this article reported a honeycomb composite structure filled with glass fiber (HFG) based on a paper‐making process and the corresponding sandwich structure. Pulping parameters, mechanical property, air permeability and sound insulation of HFG were analyzed. The results showed that the hanging index and settling height of glass fiber slurry were inversely proportional to the beating degree, which was beneficial for reducing the coefficient of variation (CV) of HFG with value of 4%–6%. The maximum improvement in tensile strength and bursting strength of HFG were 70% and 53%, respectively. In addition, sound transmission loss (STL) of HFG was proportional to cell size, density, filling amount and thickness of the honeycomb. Compared to HFG, sandwich structure consisting of HFG and glass fiber/hot melt fiber panels effectively improved STL, especially at low‐mid frequencies. It was also found that designing holes on the surface of sandwich structure could further improve STL in certain frequency bands. The structure offered a lightweight and high‐performance response for construction, transportation and infrastructure. Highlights This article designs a new type of honeycomb filled glass fiber via paper‐making process, aiming to improve the comprehensive performance of honeycomb. By the design of embedded structure, the maximum improvement in tensile strength and bursting strength of honeycomb were 70% and 53%, respectively. By designing perforated, embedded and laminated structures, sound insulation has been improved, while reducing material quality.

Research on Acoustic Absorption Properties of Aramid Honeycomb Composite Material Reinforced by Polyimide Foam

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Facile Adjusting for Cells of Lightweight Isocyanate-based Polyimide Foam and Operable Combination between Different Distinctive Acoustic Foams for Higher Performance

Hybrid Polyimide Foams with Hyperbranched Organosilicon for High-Temperature Sound Absorption

Fabrication of Hydroxyl Modified Hollow Glass Microsphere Composite Isocyanate‐Based Polyimide Foam and Optimization Strategy Based on Different Bonding Mechanisms

Modified hollow glass microsphere isocyanate-based polyimide foam composite with improved mechanical and thermal insulation properties

Polyacrylonitrile nanofiber reinforced polyimide composite aerogels with fiber-pore interpenetrating structures for sound absorption, air filtration and thermal insulation

Fabrication of ultra-high strength MWCNTs/CI /PI rigid composite foam with excellent microwave absorption performance by pressure foaming method

Mechanical properties of phenolic foam composite meta-aramid honeycomb under various directional loads and thermal environments

Aramid reinforced polyimide aerogel composites with high‐mechanical strength for thermal insulation material

3D Printed High–strength Polyimide Aerogel Metamaterials for Sound Absorption and Thermal Insulation

Fabrication of multifunctional polyimide foams with co-polymerized benzimidazole moieties for excellent thermal insulation and flame retardancy applications

High-Strength and Multifunctional Honeycomb Polyimide Aerogel Fabricated by a Freeze Casting-Assisted Extrusion Printing and Building Block-Assembly Strategy for Sound Absorbing Metamaterials

Enhanced sound absorption property of polyimide aerogels by the incorporation of macropores

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Fabrication of Lightweight Polyimide Foams with Exceptional Mechanical and Thermal Properties

Fabric reinforced polyimide aerogel matrix composites with low thermal conductivity, high flexural strength, and high sound absorption coefficient

Preparation and sound insulation of honeycomb composite structures filled with glass fiber

Structural Optimization of Polyimide Foam via Composition with Hyperbranched Polymer Modified Fluorinated Carbon Nanotubes

Polyimide aerogel/aramid fiber composite with high mechanical strength and thermal insulation for thermal protective clothing

Preparation of Open-Cell Rigid Polyimide Foam via Nonaqueous High Internal Phase Emulsion-Templating Technique