Abstract:A facile and cost-effective modified sol–gel synthesis is employed to synthesize flexible silica-cellulose hybrid aerogels (SCHA) using recycled cellulose fibers (RCF). The effect of cellulose fiber concentrations and ambient temperature conditions on the thermal, acoustic, and oil absorption characteristics was quantified comprehensively. The experiments were conducted by considering the range of weight fractions from 1–4 wt.% from waste tissue paper with a cross-linker and tetraethylorthosilicate (TEOS) as silica precursors. The SCHA aerogels were modified by a silylating agent with surface hydroxyl groups to achieve superhydrophobic behavior with a water contact angle (WCA) as high as 168°. The synthesized aerogels were characterized by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), scanning electron microscope (SEM), and Brunauer-Emmett-Test (BET) to identify the physical morphology. An excellent oil absorption capacity of 24.8 g.g −1 was also noticed with 4 wt.% of cellulose concentration in hybrid aerogel retained up to 5 cycles with an absorption capacity of 6.4 g.g −1 . The average thermal conductivity of hybrid aerogels was estimated in the range of 0.038–0.032 W/m K. Slight enhancement in the thermal conductivity is noted with the increase in wt.% of cellulose to the silica aerogel. However, about 40–50 °C improvement in thermal degradability (as concluded from Thermogravimetric Analysis) with a minimum weight loss was observed in hybrid aerogel over cellulose aerogel. A comparatively high sound absorption coefficient of 0.453–0.628 at low frequency (1500 Hz) and 0.86–0.94 at high frequency (3600 Hz) was achieved with an average thickness of 8 mm compared to cellulose aerogel. The compressive Young's modulus of hybrid aerogels was also enhanced by 94.12%.

Hydrophobic microcrystalline cellulose/polyethyleneimine composite aerogel for effective sound absorption

Ultralight, Elastic, Magnetic and Superhydrophobic Cellulose Nanofibril Based Aerogel with Layer-Support Structure Designed for Both Excellent Oil-Water Separation and Efficient PM2.5 Removal

Sustainable cellulose-based aerogels fabricated by directional freeze-drying as excellent sound-absorption materials

Preparation of lamellar-structured carboxymethyl cellulose aerogels for efficient sound absorption

Development of superhydrophobic hybrid silica-cellulose aerogel as promising thermal insulation and sound absorption

Multifunctional elastic aerogels of nanofibrous metal−organic framework for thermal insulation and broadband low-frequency sound absorption

Multifunctional ultralight nanocellulose aerogels as excellent broadband acoustic absorption materials

Hydrophobic Cellulose Acetate Aerogels for Thermal Insulation

Superhydrophobic hybrid silica-cellulose aerogel for enhanced thermal, acoustic, and oil absorption characteristics

Preparation and Acoustic Performance of Porous Aerogel Composites of Graphene Oxide and Cellulose

Hierarchically structured cellulose aerogels with interconnected MXene networks and their enhanced microwave absorption properties

Chitosan/clay aerogel: Microstructural evolution, flame resistance and sound absorption

Dual-network PVA fiber-doped cellulose aerogel with labyrinth structure for low and medium frequency acoustic and flame retardant applications

Sustainable versatile chitin aerogels: facile synthesis, structural control and high-efficiency acoustic absorption

Anisotropic and high-strength SiO2/cellulose nanofiber composite aerogel with thermal superinsulation and superhydrophobicity

Ultralight biomass-derived carbon fibre aerogels for electromagnetic and acoustic noise mitigation

Hybrid silica-cellulose aerogel as a robust sound insulation composite derived from geothermal powerplant solid waste

Anisotropic cellulose-based phase change aerogels for acoustic-thermal energy conversion and management

Multifunctional carboxymethyl cellulose nanofiber/liquid metal aerogels for sound absorption and heat insulation

Superior Stable, Hydrophobic and Multifunctional Nanocellulose Hybrid Aerogel Via Rapid UV Induced In-Situ Polymerization

Anisotropic cellulose nanofiber/chitosan aerogel with thermal management and oil absorption properties