Abstract:Purpose The purpose of this paper is to demonstrate the simplicity and versatility of micro‐cantilever based sensors and to present the influence of added mass and stress on the frequency response of the sensor in order to determine the most suitable sensing domain for a given application. Design/methodology/approach The frequency response of micro‐cantilevers depends not only on the applied mass and surface stress, but also on the mass position. An interpretation of the theoretical frequency results of the 1st and 2nd natural frequencies, for added mass, identifies a nodal point for the 2nd natural frequency which demonstrates mass invariance. Hence, at this nodal point, the frequency response remains constant regardless of mass and may be used for identifying purely induced surface stress influences on the micro‐cantilever's dynamic response. The Rayleigh‐Ritz energy method is used for the theoretical analysis. Theoretical results are compared with experimental results. Findings A graph of the 2nd natural frequency of micro‐cantilevers with added mass demonstrates the variability of the frequency with mass position on the micro‐cantilever. Of particular interest is the nodal point at which mass independence is revealed. This nodal point may be exploited to investigate purely stress‐related influences on the dynamic characteristics of micro‐cantilever sensors, thereby eliminating such effects as reactant evaporation from the micro‐cantilever sensor surface. In this regard, the nodal point of the 2nd natural frequency response is used to decouple mass‐stress influences. Research limitations/implications Owing to the micro‐scale size of the micro‐cantilevers, it may not be possible to apply mass or stress directly at the nodal point and to concentrate its influence there. Hence, a certain amount of influence due to mass‐stress coupling may remain in the frequency responses observed. Practical implications Silicon micro‐cantilevers can be easily shaped and sensitized to a variety of influences. These qualities are highly regarded for sensor applications. The work presented herein, contributes to the optimization of micro‐cantilever sensors' dynamic response as a function of mass and surface stress influences. The main criterion for choosing one or the other is based on the time for the surface reaction to take place between the sensing material and the target material. The results presented contribute to the performance optimization of micro‐cantilever based medical and bio‐sensors. Originality/value Surface stress effects are generally of much smaller magnitude than mass influences; hence, through an investigation of the stress effects at the nodal point of the 2nd natural frequency it is possible to eliminate the mass influence completely. At this position mass and stress influences are decoupled and the sensor response can be uniquely quantified as a function of the applied stress. This is important for bio‐medical and health monitoring applications in which changes to the applied mass or surface stress on a micro‐cantilever sensor, may be readily observed through changes to the natural frequency response of the micro‐cantilever.

A conceptual study on novel current mirror integrated cantilever (CMIC) mass sensor for micro-gram ( g) range sensing applications

Mechanical and Electronic Approaches to Improve the Sensitivity of Microcantilever Sensors.

Fabrication and testing of PMOS current mirror-integrated MEMS pressure transducer

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

Design and simulation of a novel dual current mirror based CMOS‐MEMS integrated pressure sensor

Micromachined SiO 2 microcantilever for high sensitive moisture sensor

Fabrication and Characterization of Sio2 Microcantilever for High Sensitive Moisture Sensor

Sensitivity enhancement of P- and N-MOS based current mirror pressure sensor using differential amplifier

Design and Analysis of MEMS Pressure Sensor based on various principles of Microcantilever beam

Silicon Photonic Current Sensor Based on Multimode Interference

Simple and versatile micro‐cantilever sensors

Design and analysis of novel MEMS cantilever biosensor with special focus on SCR for tuberculosis detection

A MEMS density sensor based on mircro-rectangular cantilever

Silicon MEMS Nanomechanical Membrane Flexure Sensor With Integrated High Gauge Factor ITO

High Sensitivity MEMS Strain Sensor: Design and Simulation

Circuit Design and Verification of On-Chip Femto-Ampere Current Mode Circuit Using 0.18μm CMOS Technology

Current mirror designed with GAA nanosheet MOSFETs from room temperature to 200 °C

The Design and Analysis of a Novel Micro Force Sensor Based on Depletion Type Movable Gate Field Effect Transistor

A MEMS Micro Force Sensor Based on A Laterally Movable Gate Field-Effect Transistor (LMGFET) with A Novel Decoupling Sandwich Structure

Design of High-Sensitivity Cantilever and Its Monolithic Integration with CMOS Circuits

Net-overhang Coupled Microcantilevers for Sensitive Mass Detection