Abstract:Enhancing the mechanical strength of highly conductive pure metals usually causes significant reduction in their electrical conductivity. For example, introducing phase/matrix interfaces or more grain boundaries, are common and effective methods to strengthen metals. But it simultaneously increases the electron scattering at the interface, thus reducing the electrical conductivity. In this study, we demonstrate that pure aluminum (Al)/carbon nanotubes (CNTs) nanocomposites prepared by friction stir processing have successfully broken through these limitations. The yield strength and tensile strength of Al/CNTs nanocomposites have improved by 104.7% and 51.8% compared to pure Al, while the electrical conductivity remained comparable to that of pure Al. To explore the potential mechanisms, the interface between CNTs and Al was examined and characterized by transmission electron microscopy (TEM) and Raman spectroscopy. Little interfacial reaction compounds were present and no visible physical gaps were observed at CNTs and Al interfaces. We defined it as a clean and tightly bonded interface. Although the quantity of phase interface has increased, the electrical conductivity of the nanocomposite remains approximately unchanged. We attribute the preserved electrical conductivity to the clean and tightly bonded CNTs/Al interface in the nanocomposite.

What problem does this paper attempt to address?

### Problems the Paper Attempts to Solve This paper aims to address the issue of significantly reduced electrical conductivity in highly conductive pure metals (such as aluminum) when their mechanical strength is enhanced. Specifically, the researchers aim to develop a novel aluminum/carbon nanotube (Al/CNTs) nanocomposite material that maintains good electrical conductivity while improving material strength. #### Main Contributions 1. **Material Performance Enhancement**: The Al/CNTs nanocomposite material prepared by the Friction Stir Processing (FSP) method shows a 104.7% increase in yield strength and a 51.8% increase in tensile strength compared to pure aluminum, while maintaining electrical conductivity comparable to pure aluminum. 2. **Interface Characteristics Analysis**: Detailed characterization of the interface between CNTs and aluminum using Transmission Electron Microscopy (TEM) and Raman spectroscopy revealed a very clean and tightly bonded interface, with no significant reaction compounds or physical gaps. 3. **Mechanism Exploration**: The researchers believe that this clean and tightly bonded CNTs/Al interface is the key factor in maintaining electrical conductivity. #### Research Background - Highly conductive metals (such as silver, copper, and aluminum) typically need to enhance their mechanical strength without sacrificing electrical conductivity. - Common metal strengthening methods (such as alloying and introducing fillers) alter the periodic arrangement of the lattice, increasing electron scattering and thus reducing electrical conductivity. - Previous studies have shown that introducing twin boundaries can effectively enhance the strength of metals while maintaining electrical conductivity. However, this method is difficult to achieve in commonly used highly conductive metals. - Carbon nanotubes (CNTs) have high strength and high electrical conductivity and are considered potential fillers for enhancing the strength and electrical conductivity of metals. However, previous attempts have resulted in a loss of electrical conductivity. #### Research Methods - **Experimental Design**: The Al/CNTs nanocomposite material was prepared using the FSP method, and its mechanical properties and electrical conductivity were tested. - **Microstructure Characterization**: The distribution of CNTs in the aluminum matrix and their interface characteristics were studied using TEM and Raman spectroscopy. - **Results Analysis**: Through in-depth analysis of the interface characteristics, the reasons for the composite material maintaining good electrical conductivity were explained.

A novel aluminum-carbon nanotubes nanocomposite with doubled strength and preserved electrical conductivity

Carbon nanotubes/aluminum interface structure and its effects on the strength and electrical conductivity of aluminum

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Remarkable improvement of mechanical properties of layered CNTs/Al composites with Cu decorated on CNTs

Ultrastrong and Stiff Carbon Nanotube/Aluminum-Copper Nanocomposite Via Enhancing Friction Between Carbon Nanotubes

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Overcoming the strength-conductivity trade-off dilemma in carbon nanotube/aluminum-copper fiber by diffusion interface and chemical reaction interface

Fabrication of Al-CNT composite with high hardness and electrical conductivity by controlling Al 4 C 3 formation

Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites

High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction

Architectural and component design of CNTs/Al hierarchical composite for enhanced mechanical/thermal properties

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs

Copper coated graphene reinforced aluminum composites with enhanced mechanical strength and conductivity

Ton-scale Metal–carbon Nanotube Composite: the Mechanism of Strengthening While Retaining Tensile Ductility

Carbon Nanotubes: Intragranular Dispersion of Carbon Nanotubes Comprehensively Improves Aluminum Alloys (adv. Sci. 7/2018)

Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs

Study on the Mechanism of CNTs Regulating the Microstructures and Properties of Al–Cu–Mg Alloy

Investigation of the Microstructure, Electrical and Mechanical Properties of Al-CNTs-B4C Composite Prepared by Double-Step Stir Casting for Power Transmission Conductor

Simultaneous Improvement of the Electric Conductive and Mechanical Properties of Nanostructured Aluminum Alloy

Effects of the addition of CNTs and Al alloying on the microstructure and properties of Cu-(Al)/CNTs composites

Effect of Surface Modification of Carbon Nanotubes on the Properties of High-Strength and High-Conductivity Copper Matrix Composites