Abstract:The process of preparing continuous carbon fiber/BN/SR composites by first infiltrating and then winding. With the development of electronics, there is an increasing demand for high‐performance heat‐dissipation materials in electronic devices. Thermal conductive silicone rubber (SR) has received significant attention in related industries due to its excellent mechanical flexibility and high thermal conductivity. However, the intrinsic thermal conductivity of SR is low, necessitating the addition of thermal conductive fillers to meet the usage requirements. Common thermal conductive fillers typically exist in powder form and require such surface modification and orientation, which increases production costs and poses challenges for large‐scale production. In this study, continuous carbon fibers (CFs) are utilized as fillers. By employing a simple pre‐infiltration and winding method, CFs are uniformly distributed in SR, aligning parallel. The CFs not only serve as thermal conductive pathways but also maintain their orientation distribution within the substrate. Furthermore, by pre‐adding boron nitride (BN) to the SR, the thermal conductivity of SR is enhanced, and BN is distributed along the fibers, further improving the enhancement effect of BN on the thermal conductivity of SR. When CF content reaches 30 vol%, the thermal conductivity of CF/BN/SR composite reaches 2.789 W m−1 K−1. Moreover, by using BN/SR before curing as a coating, it can be applied to the surface of the CF/BN/SR composite. This greatly increases the volume resistivity of the material (>1014 Ω cm) while maintaining the thermal conductivity of the composite. Using continuous fibers as fillers also enables easier implementation of mass production in the preparation of thermal conductive SR. Highlights Prepare continuous carbon fiber and boron nitride (BN)‐filled composite through mechanical winding; The carbon fiber (CF)/BN/silicone rubber (SR) composite exhibits high thermal conductivity; Improve the enhancement of BN on the TC of SR by aligning the BN along the CF; BN/SR used as insulating coating by incremental curing.

Spherical boron nitride/pitch‐based carbon fiber/silicone rubber composites for high thermal conductivity and excellent electromagnetic interference shielding performance

Flexible and insulating silicone rubber composites with sandwich structure for thermal management and electromagnetic interference shielding

Enhancing thermal conductivity of spherical boron nitride/silicone rubber composites by matching interfacial modulus

Constructing a highly vertically aligned network of h-BN/CF in silicone rubber composites: Achieving superior through-plane thermal conductivity and electrical insulation

Bidirectionally Oriented Carbon Fiber/Silicone Rubber Composites with a High Thermal Conductivity and Enhanced Electromagnetic Interference Shielding Effectiveness

Interfacial Engineering of Hybrid MXene-Ni-CF Tri-Core–shell Composites for Electromagnetic Interference Shielding and E-heating Applications

Thermally Conductive and Electrically Insulated Silicone Rubber Composites Incorporated with Boron Nitride−Multilayer Graphene Hybrid Nanofiller

Highly thermal conductive and electrical insulating polymer composites with boron nitride

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

High‐Performance, Multifunctional, and Designable Carbon Fiber Felt Skeleton Epoxy Resin Composites EP/CF‐(CNT/AgBNs)x for Thermal Conductivity and Electromagnetic Interference Shielding

Preparation of continuous carbon fiber‐filled silicone rubber with high thermal conductivity through wrapping

Highly thermally conductive polymer-based composites with 3D exfoliated BNNS/functionalized SiC networks prepared by rapid solidification and hot pressing

Design of Interconnected Carbon Fiber Thermal Management Composites with Effective EMI Shielding Activity

3D boron nitride foam filled epoxy composites with significantly enhanced thermal conductivity by a facial and scalable approach

Highly Multifunctional and Thermoconductive Performances of Densely Filled Boron Nitride Nanosheets/Epoxy Resin Bulk Composites

Anisotropic PDMS/Alumina/Carbon Fiber Composites with a High Thermal Conductivity and an Electromagnetic Interference Shielding Performance

Achieving Significant Thermal Conductivity Enhancement via an Ice-Templated and Sintered BN-SiC Skeleton

Epoxy composite with significantly improved thermal conductivity by constructing a vertically aligned three-dimensional network of silicon carbide nanowires/ boron nitride nanosheets

Quasi-Hyperbolic Framework Graphite Foam-Based Composites with High Thermal Conductivity and Electromagnetic Shielding Properties Fabricated by an Electrochemical Expansion Method

Dual-functional eco-friendly liquid metal/boron nitride/silk fibroin composite film with outstanding thermal conductivity and electromagnetic shielding efficiency

Structure‐function integrated design of electromagnetic interference shielding and mechanical properties of 2D carbon fiber reinforced polymer composites based on absorption loss regulation