Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Dynamic model of a hinged-girder floating bridge subjected by moving loads

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Dynamic simulation and experiment of deployable bridge based on generalized inverse matrix

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Numerical modeling and dynamic analysis of a floating bridge subjected to wave, current and moving loads

Dynamic response analysis of a submerged floating tunnel subjected to moving load

Structural analysis method of a pontoon-separated floating bridge connected by elastic hinges

Dynamic Response Analysis of Cable-stayed Bridges Subjected to Moving Load

Dynamic Characteristics and Multi-support Seismic Response Analysis of a Super-large-span Suspension Bridge

NUMERICAL MODELING AND DYNAMIC RESPONSE ANALYSIS OF AN END-ANCHORED FLOATING BRIDGE WITH A DAMAGED PONTOON UNDER REPAIR OPERATION

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Structural dynamic performance of floating continuous beam bridge under wave and current loadings: An experimental study

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Dynamic Response Analysis for Submerged Floating Tunnel Due to Fluid-Vehicle-tunnel Interaction

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Vibration Analysis of Bridge Subjected to a Moving Elastic Vehicle Ith Flexible Connections

Influence of the sag-to-span ratio on the dynamic response of a long-span bridge suspended from floating towers under wave and wind loads