Abstract:The production of photovoltaic modules is increasing to reduce greenhouse gas emissions. However, this results in a significant amount of waste at the end of their lifespan. Therefore, recycling these solar panels is important for environmental and economic reasons. However, collecting and separating crystalline silicon, cadmium telluride, and copper–indium–gallium–selenide panels can be challenging, especially in underdeveloped countries. The innovation in this work is the development of a process to recycle all solar panel waste. The dissolution of all metals through the leaching process is studied as the main step of the flowchart. In the first step of leaching, 98% of silver can be recovered by 0.5 M nitric acid. Then, the second and third step involves the use of glycine for base metal dissolution, followed by the leaching of valuable metals with hydrochloric acid. The effect of parameters such as the initial pH, acid concentration, solid/liquid ratio, and hydrogen peroxide concentration is studied. The results show that up to 100% of Cu, Pb, Sn, Zn, Cd, In, Ga, and Se can be recovered under optimal conditions. The optimal conditions for the dissolution of Cu, Zn, and Cd were a glycine concentration of 0.5 M, a temperature of 25 °C, a solid/liquid ratio of 10 gr/L, and 1% of hydrogen peroxide. The optimized glycine concentration for the leaching of lead and tin was 1.5 M. Indium and gallium were recovered at 100% by the use of 5 M hydrochloric acid, S/L ratio = 10 gr/L, and T = 45 °C. Separation of selenium and tellurium occurred using 0.5 M HCl at a temperature of 60 °C. Additionally, for the first time, a general outlook for the recycling of various end-of-life solar panels is suggested.

Extraction and separation of Cd and Te from cadmium telluride photovoltaic manufacturing scrap

Physical and chemical pathways for economic recycling of cadmium telluride thin-film photovoltaic modules

Combinatorial Separation of Cd and Te from CdTe via Chemical Vapour Transport with Sulfur and Air/Methane Treatment for the Recovery of Critical Resources from Thin Film Solar Cells

An Efficient Hydrometallurgical Process for Extracting Tellurium From Copper Telluride Slag

Hydrometallurgical Treatment for the Extraction and Separation of Indium and Gallium from End-of-Life CIGS Photovoltaic Panels

Recovery of Valuable Materials and Methods for Their Management When Recycling Thin-Film CdTe Photovoltaic Modules

Efficient Separation and Recovery of Tellurium and Copper from High-Value-Added Industrial Copper Telluride Slag by a Sustainable Process

An environmental-friendly process for recovery of tellurium and copper from copper telluride

An efficient process for recycling of copper telluride residue out of copper anode slime

Silver Recovery from End-of-Life Photovoltaic Panels Based on Microbial Fuel Cell Technology

Recycling of copper telluride from copper anode slime processing: Toward efficient recovery of tellurium and copper

Recovery of copper, zinc and lead from photovoltaic panel residue

A Comprehensive and Sustainable Recycling Process for Different Types of Blended End-of-Life Solar Panels: Leaching and Recovery of Valuable Base and Precious Metals and/or Elements

Waste-free separation and recovery of copper telluride slag by directional sulfidation-vacuum distillation

In Situ Fabrication of Dynamic Nano Zero-Valent Iron/activated Carbon Nanotubes Membranes for Tellurium Separation

Reshaping the Module: The Path to Comprehensive Photovoltaic Panel Recycling

High-yield recycling and recovery of copper, indium, and gallium from waste copper indium gallium selenide thin-film solar panels

Separation of Pd and Pt from highly acidic leach liquor of spent automobile catalysts with monothio-Cyanex 272 and trioctylamine

Systematic Photovoltaic Waste Recycling

The History of Photovoltaics with Emphasis on CdTe Solar Cells and Modules

Silver Recovery from Wastewater, Simulating the Chemical Extract Originating from a PV Panel Using Microbial Fuel Cell Technology