Abstract:The recovery of metal from copper slag is of great significance to the resource utilization of copper slag and the sustainable development of copper smelting industry. Currently, hydrometallurgy is the traditional method used to recover mineral metals. However, as copper slag is a silicate mineral, the traditional acid-leaching process of metal results in the leaching of Si, resulting in the formation of silica gel. The silica gel can inhibit the recovery of metal while making metal difficult to separate from Si and causing filtration problems. This study proposed a two-stage method (evaporation + water washing) to selectively recover Fe and Zn from copper slag. Under the optimal conditions (evaporation: H 2 SO 4 = 3 M; time = 60 min; temperature = 120°C; and liquid–solid ratio = 4; water washing: liquid–solid ratio = 5), the leaching efficiency of Fe, Zn, and Si reached 99.94 %, 97.40 %, and 0.15 % respectively. The separation mechanism was determined through mineral characterization (XRD, SEM, HRTEM-EDS, SAED, AFM, etc.) and the application of DLVO theory. It was found that H + destroyed the Fe 2 SiO 4 structure in copper slag during the evaporation stage, which promoted the release of Fe and Zn, forming soluble sulfate crystals. Simultaneously, evaporation increased the ion concentration, reducing the repulsive force between colloids, resulting in the aggregation and precipitation of silica gel into stable amorphous silica. After washing, soluble sulfate is dissolved in water. The recovered Fe can be processed to get red iron oxide (96.32 % purity), the Zn-containing solution can be recycled for electrolytic Zn, and the residue can be used to prepare geopolymer (52.47 MPa, 28 days). The two-stage method for recovering metals from copper slag is highly efficient and provides valuable insights into resource utilization of metals and Si in silicon-containing solid wastes.

Efficient Separation and Recovery of Tellurium and Copper from High-Value-Added Industrial Copper Telluride Slag by a Sustainable Process

Waste-free separation and recovery of copper telluride slag by directional sulfidation-vacuum distillation

An Efficient Hydrometallurgical Process for Extracting Tellurium From Copper Telluride Slag

An environmental-friendly process for recovery of tellurium and copper from copper telluride

Recycling of copper telluride from copper anode slime processing: Toward efficient recovery of tellurium and copper

An efficient process for recycling of copper telluride residue out of copper anode slime

Recovery of valuable metals from electroplating sludge with reducing additives via vitrification

A novel process for extracting tellurium from the calcine of copper anode slime via continuous enrichment

A green method to clean copper slag and rapidly recover copper resources via reduction-sulfurizing smelting and super-gravity separation at low temperature

Two-stage method recovery of metals from copper slag: Realize the resource utilization of all components

Stepwise Utilization Process to Recover Valuable Components from Copper Slag

Selective Separation and Recovery of Valuable Metals Through Directional Vulcanization of Black Copper Sludge

Recovery of Tellurium from Cyanide Leaching Gold Tailings and the Leaching Mechanism of Lead Telluride

Processing of copper converter slag for metal reclamation. Part I: Extraction and recovery of copper and cobalt

Efficient Separation and Purification Method for Recovering Valuable Elements from Bismuth Telluride Refrigeration Chip Waste

Recovery of valuable metals from copper slag

Recovery of Cathode Copper and Ternary Precursors from Cus Slag Derived by Waste Lithium-Ion Batteries: Process Analysis and Evaluation

Co-treatment of waste smelting slags and gypsum wastes via reductive-sulfurizing smelting for valuable metals recovery

Selective reduction separation and recovery of tellurium and bismuth from acidic leaching solution

An environmentally-friendly method to recover silver, copper and lead from copper anode slime by carbothermal reduction and super-gravity

An approach of cobalt recovery from waste copper converter slags using pig iron as capturing agent and simultaneous recovery of copper and tin