Abstract:Highly sulfonated carbon nano-onions (SP–CNOs) with large specific surface area are used as a new type of nanofiller in sulfonated poly(arylene ether sulfone) (SPAES) to construct and adjust the proton transfer channels efficiently. SP-CNOs are synthesized from nanometer diamonds via thermal annealing, phenylation and sulfonation, and characterized by XRD, XPS, BET, Raman and HRTEM. The obtained mesoporous SP-CNOs possess a large specific surface of 350 m2/g and an average pore size of 9.7 nm, which endow the nanoparticles with good dispersivity and hydrophilicity. A series of composite membranes based on SP-CNOs/SPAES are prepared through the solution casting approach and evaluated by FESEM, XRD, TGA, water uptake, proton conductivity, chemical stability and fuel cell performance. The results indicate that the composite membranes all show excellent mechanical toughness and greatly enhanced water-retention capacity, thermal, dimensional and oxidative stability due to the good interfacial compatibility and the formation of hydrogen-bond interaction between SP-CNOs and SPAES. The SPAES/SP-CNOs-1.5 membrane achieves the highest proton conductivity of 181.2 mS/cm at 90 °C, which is 45% higher than that of SPAES; H2/O2 fuel cell performance records a power density of 735 mW/cm2 at 80 °C, which is slightly better than that of Nafion® 112. In addition, the SPAES/SP-CNOs-1.5 membrane undergoes the CV decay of 0.38 mV/h after 168 h at 80 °C, which is comparable to Nafion® 112 (0.43 mV/h) but lower than that for the pristine SPAES membrane (0.54 mV/h). After the accelerated stress test, the SPAES/SP-CNOs-1.5 membrane exhibits superior cell performance and lower hydrogen crossover than the pristine SPAES membrane.

Inorganic-organic composite membranes containing amino-functionalized mesoporous silica loaded phosphotungstic acid with enhanced fuel cell performance and stability

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Modified sulfonated poly(phthalazinone ether ketone) membranes with inorganic particles for potential applications in PEMFCs

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Layered Double Hydroxide-Coated Silica Nanospheres with 3D Architecture-Modified Composite Anion Exchange Membranes for Fuel Cell Applications

Multi-component organic/inorganic blend proton exchange membranes based on sulfonated poly(arylene ether sulfone)s for fuel cells

Mercaptoethanol-assisted synthesis of sulfonic acid-functionalized polysiloxanes as inorganic fillers in composite membranes for energy-storage applications

Highly sulfonated carbon nano-onions as an excellent nanofiller for the fabrication of composite proton exchange membranes with enhanced water retention and durability

Improved Performance of Sulfonated Poly Ether Ether Ketone/three-Dimensional Hierarchical Molybdenum Disulfide Nanoflower Composite Proton Exchange Membrane for Fuel Cells

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Novel bifunctional fillers (ATP/P–CNOs) for sulfonated poly(aryl ether sulfone) matrix for improved power output and durability of H2/O2 fuel cell at low humidity

Titanium oxide/graphitic carbon nitride nanocomposites as fillers for enhancing the performance of SPAES membranes for fuel cells

Nano-Composite Filler of Heteropolyacid-Imidazole Modified Mesoporous Silica for High Temperature PEMFC at Low Humidity

Hybrid proton exchange membrane used in fuel cell with amino-functionalized metal–organic framework in sulfonated polyimide to construct efficient ion transport channel

Novel Nafion composite membranes with mesoporous silica nanospheres as inorganic fillers

Molecular-Level Modification of Sulfonated Poly(arylene ether ketone sulfone) with Polyoxovanadate-Ionic Liquid for High-Performance Proton Exchange Membranes

Magnetically aligned composite membranes based on sulfonated poly(ether ether ketone) and phosphotungstic acid-loaded magnetic nanoparticles for fuel cell

Organic–inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol–gel process

Novel Modification Method to Prepare Crosslinked Sulfonated Poly(ether Ether Ketone)/silica Hybrid Membranes for Fuel Cells