Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The current study focuses on fabricating partially biodegradable composites added with nettle and grewia optiva fibers in epoxy. The mechanical properties of various fiber reinforcement combinations, such as tensile, impact, and flexural strength were evaluated. One of the main issues when drilling natural fiber-reinforced polymer composites is delamination damage. Therefore, the drilling ability of the hybrid composites was investigated by various drilling operation conditions: drill diameter (4, 6, 8 mm), feed rate (0.125, 0.212, 0.3 mm/rev) and spindle speed (400, 600, 800 rev/min). The experimental investigation was carried out using a twist drill at dry and ambient temperatures. The response surface methodology (RSM) was adopted during the investigation and the contribution of feed rate (65.31%) was found as the dominant factor, followed by spindle speed (35.83%) and drill diameter (10.72%) to influence the delamination factor of hybrid composites. The grey relation analysis was further applied to the experimental results to rank the experiments. Scanning electron microscopy was used to examine the fractured surface of tested samples and delamination damage caused by drilling operations. The developed composites offered a maximum tensile strength (34.3 MPa), impact strength (11.13 J) and flexural strength (23.91 MPa) observed in the hybrid composites for a reinforcement combination of 5% nettle and 15% grewia optiva fibers. The prediction models developed by RSM and artificial neural network (ANN) were matched with the investigated results and ANN was noticed to be more accurate than the RSM. The research work will be beneficial for the industries involved in the development of structural panels reinforced with nettle and grewia optiva fibers.

Artificial neural network-based predictive model for output characteristics in drilling of quartz cyanate ester polymeric composite

Experimental investigation on mechanical performance and drilling behavior of hybrid polymer composites through statistical and machine learning approach

Regression Model-based Parametric Analysis of Drilling of Multi-walled Carbon Nanotubes-added Glass Fiber Composite Laminates

Experimental evaluation and prediction on drilling of Corchorus olitorius filler-based composite

Artificial Intelligence System Approach for Optimization of Drilling Parameters of Glass-Carbon Fiber/Polymer Composites

Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining

Statistical modelling and assessment of surface roughness in drilling of hybrid fiber composite

PREDICTION OF TORQUE IN DRILLING WOVEN JUTE FABRIC REINFORCED EPOXY COMPOSITES USING THE ADAPTIVE NETWORK-BASED FUZZY INFERENCE SYSTEM AND RESPONSE SURFACE METHODOLOGY

A smart tool wear prediction model in drilling of woven composites

Performance assessment of rotary drilling using non-linear multiple regression analysis and multilayer perceptron neural network

A Comprehensive Study on the Optimization of Drilling Performance in Hybrid Nano-Composites and Neat CFRP Composites Using Statistical and Machine Learning Approaches

Modeling of delamination in drilling of glass fiber-reinforced polyester composite by support vector machine tuned by particle swarm optimization

Stacked generalization ensemble learning strategy for multivariate prediction of delamination and maximum thrust force in composite drilling

Neural Network Approach Modelling Mechanical Characteristics of Fly ash, Pond ash and Bottom Ash integrated Geopolymer Composites.

Prediction and optimization of Nd: YAG laser transmission micro-channelling on PMMA employing an artificial neural network model

Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach

Modeling and experimental analysis of ultrasonic vibration drilling force prediction model for tiny small holes in high body fraction aluminum-based silicon carbide composites

Predicting thrust force during drilling of composite laminates with step drills through the Gaussian process regression

Multi-response optimization of carbon fiber reinforced polymer (CFRP) drilling using back propagation neural network-particle swarm optimization (BPNN-PSO)

Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites

Concurrent predictions of tension, compression, and shear characteristics of epoxy using three-network viscoplastic model