Cover Image, Volume 141, Issue 15

Ashwini Shende,Ramalingam Chidambaram

DOI: https://doi.org/10.1002/app.54143

IF: 3

2024-03-08

Journal of Applied Polymer Science

Abstract:The cover image by Ashwini Shende unveils the intricate synthesis mechanism of grafting, showcasing the grafting of polyacrylamide onto the surface of Tragacanth gum bioflocculant using the microwave‐assisted method. DOI: 10.1002/app.55247

polymer science

What problem does this paper attempt to address?

Macromol. React. Eng. 4/2008

Xiaoxiang Zhu,Bo‐Geng Li,Linbo Wu,Yougui Zheng,Shiping Zhu,Klaus‐Dieter Hungenberg,Stefan Müssig,Birgit Reinhard

DOI: https://doi.org/10.1002/mren.201190014

IF: 1.871

2008-01-01

Macromolecular Reaction Engineering

Abstract:Cover: The graft polymerization of vinyl acetate (VAc) from poly(ethylene glycol) (PEG) was investigated by both experiments and modeling work. The graph on the left of the cover picture illustrates the graft copolymer molecular weight as determined by definitive calculation, GPC with PVAc or PEG calibration, and the model prediction. Using the correlated Arrhenius expression of the chain transfer constant to PEG(C PEG ), the graft copolymer molecular weights at various temperatures was predicted in the figure on the right. Further details can be found in the article by X. Zhu, B.‐G. Li, * L. Wu, Y. Zheng, S. Zhu, * K.‐D. Hungenberg, S. Müssig, and B. Reinhard on page 321.
Macromol. React. Eng. 9–10/2012

Li,Linbo Wu,Zhiyang Bu,Cheng Gong,Bo‐Geng Li,Klaus‐Dieter Hungenberg

DOI: https://doi.org/10.1002/mren.201290023

IF: 1.871

2012-01-01

Macromolecular Reaction Engineering

Abstract:Cover: Particle formation and its growth for the graft copolymerization of styrene and acrylonitrile in poly-(propylene glycol) are studied by experiments. Particle growth processes are well described by the presented model and correspond with polymerization kinetics. Further details can be found in the article by L. Li, L. Wu,* Z. Bu, C. Gong, B.-G. Li,* and K.-D. Hungenberg on page 395.
Cover Image, Volume 141, Issue 22

Anandu Nair Gopakumar,Alexander Ccanccapa‐Cartagena,Kati Bell,Maryam Salehi

DOI: https://doi.org/10.1002/app.54155

IF: 3

2024-05-01

Journal of Applied Polymer Science

Abstract:The cover image is based on the Research Article Development of crosslinked polyvinyl alcohol nanofibrous membrane for microplastic removal from water by Anandu Nair Gopakumar et al., https://doi.org/10.1002/app.55428 image

polymer science
Cover Image, Volume 141, Issue 8

Thotapalli Lahari,Subham Banerjee

DOI: https://doi.org/10.1002/app.54129

IF: 3

2024-01-15

Journal of Applied Polymer Science

Abstract:Purushottam. B. Suryavanshi created the cover image that shows Fused Filament Fabrication (FFF) coupled with Hot‐melt Extrusion (HME) for the fabrication of enteric film engraved onto Quick Response (QR) encoded PLA films for enteric intestinal specific delivery. DOI: 10.1002/app.55048

polymer science
Cover Image, Volume 140, Issue 36

Cunyue Wei,Kun Li,Feng Lin,Shengli Mi,Lina Dong,Yu Song,Ting Zhang

DOI: https://doi.org/10.1002/app.52544

IF: 3

2023-08-14

Journal of Applied Polymer Science

Abstract:The cover image created by Cunyue Wei and Yu Song shows the PAM/glycerol hydrogels designed in a shape of bulk materials. The visible light can penetrate and they can work as lenses. When outside forces influence them, the light path within the materials will change and they can work as actuators. DOI: 10.1002/app.54322

polymer science
Cover Image, Volume 141, Issue 20

Jun Araki,Minami Nakajima

DOI: https://doi.org/10.1002/app.54153

IF: 3

2024-04-15

Journal of Applied Polymer Science

Abstract:Wet spinning of chitin nanowhiskers: Effects of electrolyte composition in coagulation baths on mechanical properties and nanowhisker orientation by Jun Araki and Minami Nakajima. DOI: 10.1002/app.55335 image

polymer science
Cover Image, Volume 140, Issue 35

Peng Wei,Yanan Zhang,Zhiqiang Li,Junhui Li,Jiaojiao Li,Caihong Chen,Qifan Xu,Yifeng Zhang

DOI: https://doi.org/10.1002/app.52543

IF: 3

2023-08-07

Journal of Applied Polymer Science

Abstract:The cover image by Peng Wei et al. presents high performance biobased liquid crystal copolyesters composed of suberic acid (Sa) and furandicarboxylic acid (FA). For combining advantages of bio‐polymer and liquid crystal polymer, the copolyesters not only have the advantages of green and sustainable sources, but also have outstanding processing ability, mechanical properties and other comprehensive properties, which provide a novel strategy to develop high performance bio‐polymers. DOI: 10.1002/app.54473

polymer science
Cover Image, Volume 119, Number 7, July 2022

Niling He,Jia Jia,Zhongyang Qiu,Chun Fang,Gunnar Lidén,Xiucai Liu,Jie Bao

DOI: https://doi.org/10.1002/bit.28151

IF: 3.8

2022-01-01

Biotechnology and Bioengineering

Abstract:The cover image is based on the Article Cyclic l-lactide synthesis from lignocellulose biomass by biorefining with complete inhibitor removal and highly simultaneous sugars assimilation by Niling He et al., https://doi.org/10.1002/bit.28082.
Cover Image, Volume 141, Issue 6

Matheus P. Neivock,Caio S. Gomide,Vinícius G. Nogueira,Anderson R. L. Caires,Samuel L. Oliveira

DOI: https://doi.org/10.1002/app.54125

IF: 3

2024-01-01

Journal of Applied Polymer Science

Abstract:In the center of the photo taken by Matheus Piazzalunga Neivock, the main geometries employed for assessing the tensile properties of polymeric materials are surrounded by a few broken 3D‐printed samples. DOI: 10.1002/app.54991

polymer science
Cover Image, Volume 141, Issue 17

Lizandra Viana Maurat da Rocha,Paulo Sergio Rangel Cruz da Silva,Eduardo Miguez Bastos da Silva,Vinicius de Oliveira Aguiar,Maria Inês Bruno Tavares

DOI: https://doi.org/10.1002/app.54147

IF: 3

2024-03-21

Journal of Applied Polymer Science

Abstract:The cover image by Lizandra Viana Maurat da Rocha highlights one of our innovative biodegradable films, which incorporated molybdenum trioxide and zinc oxide into the poly(butylene adipate‐co‐terephthalate) matrix through casting. The photo emphasizes its partial transparency and homogeneity. Some analytical results reported as FTIR, TD‐NMR, XRD and TGA validates nanomaterial's exceptional mechanical and chemical properties. Icons below underscore its potential as an eco‐friendly food packaging,with bacteriostatic features and no formation of microplastics after disposal. DOI: 10.1002/app.55294 image

polymer science
Inside Back Cover Image, Volume 118, Number 2, February 2021

Renhao Lu,Wuhua Zhang,Yuting He,Siyuan Zhang,Qian Fu,Yuan Pang,Wei Sun

DOI: https://doi.org/10.1002/bit.27683

IF: 3.8

2021-01-25

Biotechnology and Bioengineering

Abstract:The cover image is based on the Communication to the Editor Ferric ion crosslinking‐based 3D printing of a graphene oxide hydrogel and its evaluation as a bio‐scaff old in tissue engineering by Renhao Lu et al., https://doi.org/10.1002/bit.27592.

biotechnology & applied microbiology
Cover Image, Volume 62, Issue 18

DOI: https://doi.org/10.1002/pola.31317

IF: 3.046

2024-09-15

Journal of Polymer Science

Abstract:The cover image is based on the Article Polyurethanes by ring‐opening polymerization initiated from alcohol moiety‐tethering acylazide by Yosuke Akae and Patrick Theato, https://doi.org/10.1002/pol.20240092 . The cover image by Yosuke Akae shows the unique utility of the orthogonal reagent by using the analogy of Japanese archery (Kyudo). The reagent is able to play a role as (1) initiator of ring‐opening polymerization to give polyester (an arrow), and (2) AB‐type monomer to afford polyurethane (a bow). When both are combined (bow and arrow are completed), a unique polyurethane structure, which has been difficult to be addressed by other method, is easily synthesized. The player depicted as a shadow is the author himself in the background image of Japanese castle. image

polymer science
Cover Image, Volume 62, Issue 21

Runcheng Tan,Guangqi Huang,Cong Wei,Zepeng He,Tianyu Zhao,Yi Shi,Zhijia Liu,Yongming Chen

DOI: https://doi.org/10.1002/pola.31366

IF: 3.046

2024-01-01

Journal of Polymer Science

Abstract:The cover image is based on the Article Influence of structural variations in polysarcosine functionalized lipids on lipid nanoparticle‐mediated mRNA delivery by Runcheng Tan et al., https://doi.org/10.1002/pol.20240154 image
Cover Image, Volume 140, Issue 31

Yu Wang,Wenlong Yang,Jiaqi Lin,Xinmei Liu,Hongguo Sun,Ying Yang,Xunjun He

DOI: https://doi.org/10.1002/app.52540

IF: 3

2023-07-07

Journal of Applied Polymer Science

Abstract:Wenlong Yang and Yu Wang designed the cover image that showed the interface structure of the polyimide/silica composites. The functional groups on the surface of nanofillers could significantly improve the organic‐inorganic interfacial compatibility and the interfacial load transfer efficiency. The static dielectric permittivity of PI‐based composites could be elevated by enhancing intrinsic polarization. These results provided an understanding of the atomic‐scale interfacial structures, which was beneficial for the design and preparation of the nanocomposites with superior dielectric and mechanical performances. DOI: 10.1002/app.54321

polymer science
Cover Image, Volume 62, Issue 6

DOI: https://doi.org/10.1002/pola.31069

IF: 3.046

2024-03-15

Journal of Polymer Science

Abstract:The eutectogels find promising applications as flexible conductive materials. The study from Jianhua Zhang of Tianjin University reports a facile strategy to prepare poly( N ‐acryloyl glycinamide) eutectogels by one‐step in situ photopolymerization of N ‐acryloyl glycinamide without any crosslinkers in a deep eutectic solvent composed of choline chloride and ethylene glycol. The obtained poly( N ‐acryloyl glycinamide) eutectogels exhibit concentration‐dependent and adjustable mechanical properties, high electrical conductivity, and self‐healing abilities as well as good anti‐drying and antifreezing properties. DOI: 10.1002/pol.20230603 image

polymer science
Cover Image, Volume 141, Issue 10

Jing Lin,Jin Dong,Bing Chen,Jiayuan Liang,Hebai Zhang,Zhenguo He,Jiafa He,Rongjian Zhong,Xuyun Liang,Dechao Hu

DOI: https://doi.org/10.1002/app.54133

IF: 3

2024-02-01

Journal of Applied Polymer Science

Abstract:The cover image by Jing Lin and Dechao Hu introduces the controllable exfoliation of h‐BN and tailored three‐dimensional networks for highly thermally conductive polymer composites. Rational construction of the 3D BNNS continuous network is crucial for highly efficient thermal transport and it has been shown to be a feasible and effective approach to prepare polymer/BNNS composites with outstanding thermal conduction capacity. This will shine in various advanced thermal management applications such as aerospace, electronic devices, electric vehicles, etc. DOI: 10.1002/app.55094

polymer science
Back Cover Image, Volume 120, Number 4, April 2023

Qingyan Yuan,Minhui Wu,Yibo Liao,Shuli Liang,Yuan Lu,Ying Lin

DOI: https://doi.org/10.1002/bit.28370

IF: 3.8

2023-01-01

Biotechnology and Bioengineering

Abstract:The cover image is based on the Article Rapid prototyping enzyme homologs to improve titer of nicotinamide mononucleotide using a strategy combining cell-free protein synthesis with split GFP by Qingyan Yuan et al., https://doi.org/10.1002/bit.28326.
Microwave‐assisted synthesis, characterization, and application of tragacanth gum grafted copolymer as bioflocculant for the treatment of textile wastewater using coagulation‐flocculation technique: Swelling behavior and biodegradation studies

Ashwini Shende,Ramalingam Chidambaram

DOI: https://doi.org/10.1002/app.55247

IF: 3

2024-02-09

Journal of Applied Polymer Science

Abstract:Outline of the synthesis and characterisation of grafted polymer. This study presents, the synthesis of microwave‐assisted biodegradable polyacrylamide grafted tragacanth gum (Tr‐g‐PAM), which was utilized as a bioflocculant to treat textile effluent and compared against the conventional flocculant. The reaction parameters for maximal grafting were optimized by varying the reaction factors. The grafting of acrylamide onto the backbone of Tragacanth gum was confirmed by FTIR, XRD, TGA, and SEM–EDX studies. Swelling studies were performed in deionized water and different salts. Tr‐g‐PAM exhibited pH and temperature‐dependent swelling behavior. Biodegradation studies of the graft copolymer were carried out by the soil composting method. Tr‐g‐PAM showed 91.54% degradation within 60 days, compared to Tragacanth, which degraded within 15 days. SEM techniques were used to describe various phases of biodegradation. Flocculation performances of the graft copolymers were evaluated in simulated colloidal wastewater. Influencing variables such as bioflocculant dosage, pH, and flocculation mixing speed were examined. The maximum decolorization at the optimum pH of 6 and 120 mg/L dosage was found to be 91.8% and 88.5% for Tr‐g‐PAM and Tragacanth. In conclusion, a biodegradable Tr‐g‐PAM with better flocculation efficiency than that of Tragacanth and other commercial flocculants would be a promising choice as an eco‐friendly adsorbent for the removal of contaminants from water resources.

polymer science
Cover Feature: Homogeneous Catalyzed Direct Conversion of Furfural to Gamma‐Valerolactone (ChemSusChem 11/2024)

Sakhitha Koranchalil,Danielle Lobo Justo Pinheiro,Rosa Padilla,Martin Nielsen

DOI: https://doi.org/10.1002/cssc.202400950

IF: 8.4

2024-06-11

ChemSusChem

Abstract:"Whereas classical approaches focus only on cellulose... for upgrading biowaste directly to GVL, our research opens up the possibility of adding hemicellulose... to the substrate pool." This and more about the story behind the research that inspired the Cover image is presented in the Cover Profile. Read the full text of the corresponding research at 10.1002/cssc.202301608. View the Front Cover 10.1002/cssc.20202400950. Invited for this issue's cover is the group of Martin Nielsen at the Technical University of Denmark. The image shows the chemical components of lignocellulose and the transformation of hemicellulose to GVL via furfural. The Research Article itself is available at 10.1002/cssc.202301608.

chemistry, multidisciplinary,green & sustainable science & technology
Cover Image, Volume 140, Issue 26

Yu Wang,Wenlong Yang,Jiaqi Lin,Xinmei Liu,Yuhang Zuo,Hongguo Sun,Ying Yang,Xunjun He

DOI: https://doi.org/10.1002/app.52534

IF: 3

2023-06-01

Journal of Applied Polymer Science

Abstract:Wenlong Yang and Yu Wang designed the cover image that shows flexible all‐organic polyimide‐poly(amidic acid)/poly(vinylidene fluoride) hybrid films. The incorporation of polyvinylidene fluoride and poly(amidic acid) with high intrinsic polarization strength into polyimide could significantly enhance the energy density and suppress the dielectric loss of PI‐based composites. The authors propose a simple and low‐cost approach to fabricate films with excellent dielectric performance, which can provide a contribution to the next generation of dielectric capacity. DOI: 10.1002/app.54043

polymer science

Cover Image, Volume 141, Issue 15

Macromol. React. Eng. 4/2008

Macromol. React. Eng. 9–10/2012

Cover Image, Volume 141, Issue 22

Cover Image, Volume 141, Issue 8

Cover Image, Volume 140, Issue 36

Cover Image, Volume 141, Issue 20

Cover Image, Volume 140, Issue 35

Cover Image, Volume 119, Number 7, July 2022

Cover Image, Volume 141, Issue 6

Cover Image, Volume 141, Issue 17

Inside Back Cover Image, Volume 118, Number 2, February 2021

Cover Image, Volume 62, Issue 18

Cover Image, Volume 62, Issue 21

Cover Image, Volume 140, Issue 31

Cover Image, Volume 62, Issue 6

Cover Image, Volume 141, Issue 10

Back Cover Image, Volume 120, Number 4, April 2023

Microwave‐assisted synthesis, characterization, and application of tragacanth gum grafted copolymer as bioflocculant for the treatment of textile wastewater using coagulation‐flocculation technique: Swelling behavior and biodegradation studies

Cover Feature: Homogeneous Catalyzed Direct Conversion of Furfural to Gamma‐Valerolactone (ChemSusChem 11/2024)

Cover Image, Volume 140, Issue 26