Abstract:Calcium chloride is a very interesting electrolyte in that it is available, virtually free, in high purity form as a waste product from the chemical industry. It has a very large solubility for oxide ions, far greater than many alkali halides and other divalent halides and has the same toxicity as sodium chloride and also a very high solubility in water. Intuitively, on the passage of current, it is expected that calcium would be deposited at the cathode and chlorine would evolve at the anode. However, if calcium oxide is added to the melt, it is possible to deposit calcium and evolve oxygen containing gases at the anode, making the process far less polluting than when chlorine is evolved. This process is discussed in terms of the addition of calcium to molten lead. Furthermore, these reactions can be altered dramatically depending upon the electrode materials and the other ions dissolved in the calcium chloride. As calcium is only deposited at very negative cathodic potentials, there are several interesting cathodic reactions that can occur and these include the decomposition of the carbonate ion and the ionization of oxygen, sulphur, selenium and tellurium. For example, if an oxide is used as the cathode in molten calcium chloride, the favoured reaction is shown to be the ionization of oxygenO + 2e− → O2−rather thanCa2+ + 2e− → CaThe oxygen ions dissolve in the salt leaving the metal behind, and this leads to the interesting hypothesis that metal oxides can be reduced directly to the metal purely by the use of electrons. Examples are given for the reduction of titanium dioxide, zirconium dioxide, chromium oxide and niobium oxide and by mixing oxide powders together and reducing the mixed compact, alloys and intermetallic compounds are formed. Preliminary calculations indicate that this new process should be much cheaper than conventional metallothermic reduction for these elements.

Application of Cyclic Voltammetry with W Electrodes for Measurement of High CaO Concentration in Molten CaCl2

Molten salt applications in materials processing

Anodic and Cathodic Reactions in Molten Calcium Chloride

Electrochemical monitoring of lanthanum ion concentration in high-temperature molten salt

Molecular dynamics simulations of the local structure and physicochemical properties of CaCl 2 molten salt

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

High-temperature electrochemical corrosion evaluation of 2.25Cr–1Mo alloy in eutectic LiCl–KCl molten salt

Quantification of lithium in molten chlorides by optical emission spectrometry using a novel molten-salt-electrode microplasma source

Electrochemical measurement of the corrosion rates of structural materials in molten NaCl–MgCl 2 at 580°C

Formation and transformation of Mg(OH)2 in anodic coating using FTIR mapping

Chronoamperometric determination of the diffusion coefficient in molten chlorides

Electrochemical Investigation on Chlorine and Electrolyte Intercalation into Graphite Anodes During Magnesium Electrolysis Process

Cyclic voltammetry to study kinetics of blast furnace slag and cerium dioxide modified electrode

Electrochemical behavior of magnesium ions in chloride melt

Method To Determine MgO and MgOHCl in Chloride Molten Salts

CeCl3 Concentration Effects on Cyclic Voltammogram Overlap in LiCl-KCl Eutectic Molten Salt

Investigation on electrochemical removal of CaCl 2 from LiCl–KCl melts

Concomitant ion matrix effects in SCGD-OES enhanced with formic acid.

Experimental Characterization of CO2 and CaCO3 Used in a Pyrometallurgical Vanadium-Extraction Process

High-performance CaO-based Composites Synthesized Using a Space-Confined Chemical Vapor Deposition Strategy for Thermochemical Energy Storage

Optimization and assessment of a sequential extraction procedure for calcium carbonate rocks