Abstract:Owning to the requirement of cost reduction and environmental protection, the application of pyrolysis carbon black (CBp) in dynamic rubber products becomes a hot topic in recent years. However, the fatigue resistance of CBp filled rubber composite is poor. Therefore, the evolution of micro- mesoscopic structure in modified CBp filled natural rubber (NR) composites during the tensile fatigue process is investigated to find the influencing factor for enhancing the fatigue resistance in this study. Results indicate that the particle/aggregate size distribution turns to be narrower after the aggregate size filtering treatment while a decreased particle/aggregate size and an improved polarity can be observed after argon plasma treatment. As a result, the average fatigue life of NR composites filled with CBp treated by air classifier, plasma modification and their combination are increased by 21%, 57% and 107%, respectively. It is found that the filler dispersion and the filler-polymer interaction deteriorate during the fatigue process. This evolution is inhibited by filler modification. Besides, the fatigue lives of filled rubber show a correspondence to their total and physical cross-linking densities as well as the bound rubber contents. The filler-polymer interaction can be proposed as an important factor in extending the fatigue life of rubber composites. These findings provide not only a promotion on the application value of CBp in fatigue resistance of rubber composite by different modification methods, but also an innovative perspective for exploring the fatigue resistance of rubber material from the aspects of filler-rubber interaction, and a scientific guidance for the development of long-life dynamic rubber products.

Coupling effect of non‐relaxing and high temperature on fatigue properties of carbon‐black filled isoprene rubber

Effect of Temperature on the Tear Fracture and Fatigue Life of Carbon-Black-Filled Rubber

Temperature effects on the lifetime reinforcement due to strain-induced crystallization in carbon black filled natural rubber under non-relaxing torsion: Comparison with non-relaxing tensile loadings

The Influence of Temperature and Crack Path Deviation on the Fatigue Crack Growth of a Non-crystallizing Rubber

Fatigue life reinforcement of carbon black filled natural rubber under non‐relaxing torsion loadings and comparison with non‐relaxing tension loadings

Fatigue Life Assessment of Filled Rubber by Hysteresis Induced Self-Heating Temperature

Relationship Between The Material Properties And Fatigue Crack-Growth Characteristics Of Natural Rubber Filled With Different Carbon Blacks

Development of Fatigue Life Model for Rubber Materials Based on Fracture Mechanics

Characterization of Viscoelastic Properties Considering the Nonrelaxation for Filled Rubber

Effect of the temperature and strain rate on the tension response of uncured rubber: Experiments and modeling

Study on the aging of three typical rubber materials under high- and low-temperature cyclic environment

Tension responses of carbon black filled rubbers at intermediate and high strain rates: Experimental investigation and modeling

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Effect of Physical and Chemical Crosslinking Structure on Fatigue Behavior of Styrene Butadiene Elastomer

Study of the Effect of Carbon Black Filling on the Mechanical Behavior of Rubber Hyper-Elasticity

Enhanced fatigue resistance of plasma modified pyrolysis carbon black filled natural rubber composites

Influence of Liquid Isoprene Rubber on Strain Softening of Carbon Black Filled Isoprene Rubber Nanocomposites

A unified probabilistic fatigue life prediction model for natural rubber components considering strain ratio effect

Investigation of the Carbon‐Black Network in Natural Rubber Under Cyclic Deformation

A combined simulation and experiment study on polyisoprene rubber composites

Effect of thermo-oxidative aging on the Payne effect and hysteresis loss of carbon-black filled rubber vulcanizates