Abstract:Biomass is a unique renewable carbon resource that can be flexibly converted into biofuels, chemicals, and biomaterials using pyrolysis technology. Microwave-assisted pyrolysis (MAP) has gained increasing attention due to its faster and more uniform heating characteristics compared to conventional pyrolysis (CP). However, thermodynamic assessments of biomass MAP-based systems that consider detailed pyrolytic product information are lacking. This study simulated biomass-derived poly-generation systems employing MAP with microwave absorbers (MAP-S) and CP with solid heat carriers (CP-S). The proposed systems included pretreatment, pyrolysis, bio-oil rectification, hydrodeoxygenation, and combined cycle power units, producing biofuels, chemicals, and electricity. To obtain operating information that aligns more closely with engineering reality, pilot-scale numerical models integrating reaction kinetics and transport processes were established for the MAP and CP reactors. These models were validated against lab-scale experimental results after scaling down the models' geometrical sizes. The results of product yields and energy consumption from numerical simulations were used to support the process simulation. Simulation results showed that the energy efficiency and net power generation efficiency of MAP-S were 59.37 % and 17.78 %, respectively, lower than the 67.19 % and 18.22 % of CP-S. In CP-S, the exergy of materials primarily moved towards the chemicals production units with an exergy efficiency ( η ex ) of 60.0 %, whereas in MAP-S, more exergy flowed towards the power generation units with a lower η ex of 58.46 %. Notably, the exergy destruction rate ( Ex d ) for CP-S was 3.91 MW, higher than the 3.65 MW for MAP-S. Moreover, the CP-S achieves a higher carbon utilization efficiency at 42.32 %, compared to 35.03 % for the MAP-S. For the pyrolysis units, although the CP unit experienced higher heat losses (0.31 MW) compared to the MAP unit (0.1 MW), the η ex for the CP unit was higher due to a lower Ex d . Additionally, CP-S consumed more hydrogen in the hydrodeoxygenation units, whereas MAP-S might achieve self-supply of hydrogen by adjusting operation conditions and technology processes.

Comparative study of continuous-stirred and batch microwave pyrolysis of linear low-density polyethylene in the presence/absence of HZSM-5

Integrating continuous-stirred microwave pyrolysis with ex-situ catalytic upgrading for linear low-density polyethylene conversion: Effects of parameter conditions

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

Conversion of low-density polyethylene into monocyclic aromatic hydrocarbons through continuous microwave pyrolysis with ex-situ dual-catalyst beds

Microwave-assisted pyrolysis of low-density polyethylene (LDPE)to value-added products over HY, HZSM-5 and Hβ catalyst

CO 2 enhanced continuous microwave pyrolysis of low-density polyethylene to produce high-quality products: Energy recovery balance and intrinsic mechanism exploration

Ex-situ Catalytic Upgrading of Vapors from Microwave-Assisted Pyrolysis of Low-Density Polyethylene with MgO

Microwave catalytic co-pyrolysis of low-density polyethylene and spent bleaching clay for monocyclic aromatic hydrocarbons

Preparation of monocyclic aromatic hydrocarbons from industrial lignin residue and polyethylene co-pyrolysis by microwave-assisted in fluidized bed based on bimetal-loaded HZSM-5/MCM-41 core-shell catalyst

A comparative thermodynamic assessment of microwave-assisted and conventional pyrolysis of biomass in poly-generation systems using coupled numerical and process simulations

Efficient Pyrolysis of Low-Density Polyethylene for Regulatable Oil and Gas Products by ZSM-5, HY and MCM-41 Catalysts

Fast Microwave-Assisted Catalytic Co-Pyrolysis of Lignin and Low-Density Polyethylene with HZSM-5 and MgO for Improved Bio-Oil Yield and Quality.

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Comparison of In-Situ and Ex-Situ Catalytic Pyrolysis in a Micro-Reactor System.

Comparative study on pyrolysis of bamboo in microwave pyrolysis-reforming reaction by binary compound impregnation and chemical liquid deposition modified HZSM-5

In-depth exploration of the energy utilization and pyrolysis mechanism of advanced continuous microwave pyrolysis

Experimental Study of Polyethylene Pyrolysis and Combustion over HZSM-5, HUSY, and MCM-41.

Comparative study of continuous and batch microwave-assisted pyrolysis of waste printed circuit boards: product characteristic, bromine transformation, and energy efficiency assessment

Syngas production from biomass pyrolysis in a continuous microwave assisted pyrolysis system

Hydrocarbon-Rich Bio-Oil Production from Ex Situ Catalytic Microwave Co-Pyrolysis of Peanut Shells and Low-Density Polyethylene over Zn-Modified Hierarchical Zeolite