Abstract:The current investigation inquiry involves silicon dioxide (SiO 2 ) and nickel oxide (NiO) nanoparticles to enhance the structural and dielectric properties of a polyvinyl alcohol (PVA) with polyethylene glycol (PEG) combination for use in flexible pressure sensors and nanoelectrical devices. Solution casting was used to fabricate PVA-PEG-SiO 2 /NiO nanocomposites at various weight percentages of (SiO 2 /NiO) N.Ps (0, 2, 4, 6 and 8) wt%. The structural properties of PVA-PEG-SiO 2 /NiO nanocomposites were studied by X-ray diffraction (XRD), and the amorphous state of the mixture consisting of polyvinyl alcohol (PVA) and polyethylene glycol (PEG) was revealed. Furthermore, the characteristic peak of the original polymers was much smaller at higher doping concentrations. According to field emission scanning electron microscopy (FE-SEM), when the weight percentage approaches 8%, the top surface of the (PVA-PEG-SiO 2 /NiO) N.Cs films exhibits homogenous and cohesive clumps or fragments dispersed randomly. Optical microscopy made it possible to observe that nanoparticles (SiO 2 /NiO) generate an integrated network inside the matrix of polymers, unlike the pure film of (PVA-PEG). The electrical properties of alternating current illustrate that as the frequency of the applied electrical field increases, the dielectric constant and dielectric loss of nanocomposites decline. Also, on the contrary, these values increase in conjunction with the increase in the concentration of nanoparticles, and the highest value is at a frequency of 100 Hz at a concentration of 8%. The (PVA-PEG) blend's dielectric constant and A.C. electrical conductivity were improved by almost 300% and 112%, respectively, at the highest addition rate (8 wt.%). The findings obtained revealed that the structural and AC electrical conductivity were enhanced by doping (PVA-PEG) with (SiO 2 /NiO) NPs. Findings indicated that the (PVA-PEG-SiO 2 /NiO) nanostructures would be excellent materials for a range of nanoelectronics industries. The results obtained showed an increase in parallel capacity. It reached 400 pf with an increase in applied pressure, as well as an increase in sensitivity to pressure of about 77.2 with the biggest percentage of weight addition of nanoparticles.

Tuning the Optical, Electrical and Dielectric Properties of Sodium Alginate/Polyethylene Glycol Blend by Incorporating AgNO3 NPs for Optoelectronic Devices and Energy Storage Applications

Structural, optical, dielectric and electrical properties of flexible nanocomposite based on NaAlg/PEO composite and AgNO 3 NPs for energy storage applications and optoelectronic devices

Enhanced structural, optical, dielectric, and electrical properties in polymer nanocomposite films via loading AgNO3 NPs for emerging optical and electrical applications

Structural, optical, and electrical enhancement of polyethylene oxide (PEO) and sodium alginate (NaAlg) through embedding silver nanoparticles (Ag NP) for optoelectrical applications

Synthesis and characterization of PEG/CS‐AgNO3 polymer nanocomposites for flexible optoelectronic and energy storage applications

Investigation on optical, structural and electrical properties of solid-state polymer nanocomposites electrolyte incorporated with Ag nanoparticles

Optimizing and boosting the physicochemical properties of some polymer nanocomposites for high-performance and flexible energy storage systems

Synthesis and Characterization of Polymer Nanocomposite Films Based on PEO/ AgNPs-PVP: Structural, Thermal, Optical, and Electrical Properties

Developing polymer nanocomposite films of ZnO/NiFe 2 O 4 nanohybrids, polyvinyl pyrrolidone, and chitosan for flexible electromagnetic applications and energy storage devices

Impact of hybrid aluminum oxide/titanium dioxide nanoparticles on the structural, optical, and electrical properties of polyvinyl alcohol/ polyethylene glycol nanocomposites for flexible optoelectronic devices

Structural, thermal, optical and conductive properties of PAM/PVA polymer composite doped with Ag nanoparticles for electrochemical application

Modification and development of optical, thermal, dielectric properties and antibacterial activity of PVA/SA blend by Ag/Se nanofillers: Nanocomposites for energy storage devices and food packaging applications

Impact the silver nanoparticles on properties of new fabricated polyvinyl alcohol- polyacrylamide- polyacrylic acid nanocomposites films for optoelectronics and radiation pollution applications

Effects of Nanoparticle Additives on the Properties of Agarose Polymer Electrolytes

Synthesis of Sodium Alginate-Silver Nanocomposites Using Plasma Activated Water and Cold Atmospheric Plasma Treatment

Effect of Silver Nano-Particles on Structural, Optical and Electrical Properties of Casted (Polyvinyl alcohol/ Polyacrylamide/Polyethylene oxide) Composites for Antibacterial Applications

Effect of green synthesis bimetallic Ag@SiO2 core–shell nanoparticles on absorption behavior and electrical properties of PVA-PEO nanocomposites for optoelectronic applications

Ameliorating and Tailoring The Morphological, Structural, and Dielectric Characteristics of SiO2 /NiO Futuristic Nanocomposites Doped PVA-PEG for Nanoelectronic and Energy Storage Applications

Enhancing the optical properties of chitosan, carboxymethyl cellulose, sodium alginate modified with nano metal oxide and graphene oxide

Modification in the microstructure of sodium carboxymethylcellulose/polyvinyl alcohol polyblend films through the incorporation of NaNO3 for energy storage applications

Synthesis of carbon nanotubes/titanium dioxide and study of its effect on the optical, dielectric, and mechanical properties of polyvinyl alcohol/sodium alginate for energy storage devices